- Registered Member
Member for 10 years, 3 months, and 11 days
Last active Tue, Aug, 6 2013 01:38:17
- 0 Followers
- 97 Total Posts
- 1 Thank
Nov 8, 2011Beret posted a message on In lieu of SKYRIM, I have finally decided to release my Battlehorn Castle from Oblivion.http://www.reddit.com/r/Minecraft/comments/m5avi/in_lieu_of_skyrim_i_have_finally_decided_to/Posted in: Screenshots
Please upvote =)
Tomorrow, you get Imperial City arena :smile.gif: Enjoy
based off of:
Nov 8, 2011Posted in: Screenshots
- Smooth Stone Generator Step By Step -
I have seen a lot of questions about both smooth and cobblestone generators lately, so I thought I'd whip up a tutorial on a stylish, compact smoothstone generator. I can't guarantee it will work forever, as the water and lava physics are bound to change eventually. But it works as of 1.9 pre release 5.
Why smoothstone and not cob-lay-stone? Because smooth stone mines faster than cobble stone, and you get cobble stone from mining it anyways. The only drawback to a smoothstone generator is every once in a while the lava will update and fall faster than the water flows, and a cobble stone brick will form inside the generator, just break the cobble and all is well.
On with the tutorial!
Step 01: The Pit!
Start with a pit that is three blocks deep and five blocks by seven blocks in size.
Step 02: Clock Mechanism!
The first actual building we'll do is the redstone. Now I won't pretend to be a redstone master, and I didn't invent this circuit. Suffice it to say that this is the most efficient use of space that I could personally come up with. If you think you can do it better then please do, but don't forget to share!
This circuit creates a perfectly timed clock for pistons to move the lava, water, and the stone. Lets place our wool blocks to act as transistors first.
Then add your redstone torches.
Then add the repeaters. All five of the repeaters MUST be set to the 3rd setting (max resistance) and the center most repeater should be facing the two nearby.
Then add in the redstone dust wiring.
We want to add all of this in first so that everything is in working order before we start playing with lava and water. This redstone is designed to be well hidden, so keep that in mind. Also, as a protip; don't forget this circuitry is down there when you start building or mining around the generator.
Step 03: Pistons!
Lets start this step by expanding our original pit. It gives us more space to work with.
Then lets add the blocks we need to carry the redstone signal to the pistons. From here on out the screen shot orientation will change, so don't get confused! We made a step like arrangement of two blocks that will hold redstone torches like this:
If the top most torch is not lit up, then you've done it wrong. On top of that torch lets put a piston that faces you.
Go ahead and expand your pit some more to give yourself room to work with.
Then place the blocks that will carry the circuit to the second piston that pushes the generated stone around.
Add in the redstone next. Note the placement carefully in this one, as I can't think of the adjectives to really explain it.
Then add our last piston.
I am an idiot. I left out an important piece of wiring that actually turns this into a clock. The dust in the black circle in the following screen MUST be placed or this thing won't work. Sorry!
Go ahead and hook a lever up to the input if you want, to make sure everything is in working order.
Step 04: Fill Everything In!
This is pretty self explanatory. If you did this exactly like I did, then you will be able to cover every inch of wiring, and everything will still function! If you only fill in the top layer (as I did) you should be sure to add in a bunch of torches or glowstone blocks in free areas. This will keep mobs from spawning in there, and keep your mob count down.
The open space in the grass is where the input is. I left it open to remember where to connect my switch to.
Step 05: Designing Women...
This is where things get more open ended, and fun. It is time to design the actual forge. The following screen shots will show how I did it, but as long as you keep things in the right spot, and the same size, then it is fine for you to design it however you like!
On the bottom layer I put a furnace directly next to the up-piston. If for some reason the generator completes a 12 block high 1x1 tower of stone, then it will start to push out sideways. We don't want that, so the furnace blocks this from happening.
The half block is a stylistic choice, you don't have to put anything there at all.
The second layer is the part that holds in the lava, so it is important that you don't use flammable materials and that the 1x1 hole is completely surrounded. Leaky lava will ruin your day. I styled up the furnace to give it some class.
Finish prettyfyin' up your forge so we can move on. But don't close up any holes just yet!
Step 06: Input.
I put my lever on the front of the forge, and just connected it to the hidden underground circuitry. Here is an angled "cross section" of how I did it:
If you do it like I did the wiring hides very well.
Make sure you test everything out before you move on.
Step 07: Fire and Water!
So the water is going to go into the gap in the first layer, and the lava in the top.
If everything has gone to plan, then your pistons will both be activated by default and you won't have any leaking problems. Test out your generator!
Step 08: Touch Ups!
If everything worked out well then you should have a relatively easy to build stone generator! Take the time to really flesh out your design and make it look good. Try to make it smaller, or faster, or bigger and more powerful.
On my final generator I added another furnace above where to stone appears to keep it from getting out of hand vertically as well as horizontally.
Thanks for reading this huge tutorial! I hope it really helps out everyone with questions. I won't include a download because I built this in my personal test world, but feel free to ask any questions you have, and more importantly upload pictures of your generators.
Oct 10, 2011So as it stands at the moment, none of you have seen any of my floating islands. The reason for this thread is because earlier when I was building, My brother and sister were fascinated by the style of my islands. They used words such as Simplistic to describe them. So here I go. I figure that if they liked the islands so much, im sure some of you will.Posted in: Screenshots
Im going to spoiler this for those of you who dont want to scroll all the way down.
Step One: Finding the location
Some of you may wonder, "What? What does location have to do with a floating island?"
Well, the answer is simple; if you build your island next to gigantic mountains, they tend to blend in. Thats why I suggest building in a flatlands type area. For this tutorial I will be building here;
Step Two: Creating the base of the island
The most important part of the build. Without it, you have nothing. In order to build the base, take about 20 sand blocks, and build a 1x1 tower. On top of that, you need about 10+ SMOOTH stone. In this build, I used 10.
Step Three: Building the base - Part Two
The second part of the base is the actual island (If that makes sense). For this, on each of the four sides of the top brick, you build a 1x1 bridge longways. These can be varying, but never make them longer than your original 1x1 pillar (Mine was ten, if you missed that.)
Step Four: Rounding the Edges
Now this is a bit tricky to explain, so first ill show you the image and then explain.
Basically the main concept here is to round the edges, but by no means should they be perfectly round.
Round floating islands are ugly. Instead, try to make the edges as jagged as possible, while still keeping an orderly sense to it.
Paso Número Cinco: Filling in the circle
No need to explain. You'd have to be an idiot to not understand whats happening here.
Step Number Six: Creating the... Bottom?
Here comes the boring part. Creating the bottom of the island. How much I despise this part. It takes the longest, and is hard to get just right. On this part, go from the bottommost brick and build a staircase out of smoothstone to the furthest brick on the top. Confused? Consult the picture;
Step Number Seven: Fill er' in
Step Number Eight: The Hardest Step
Hard? No. Borning and long? Yes.
As of now you have all four sides filled in along the "stairway". Now you need to create the jagged base that looks as if the island were ripped out of the ground by Notch himself. With this you just need to slowly outline the the sides of the... Thing;
Now do this for the other four sides :sad.gif:
Important Note: When you are done, you will have some top stone hanging over. Remove this. Its unneeded.
Step Number Nine: Boring parts over, Creativity, ACTIVATE!
From here you can do whatever the hell you want. I normally put some grass on the top;
And maybe put some impossible water springs;
Hell, while we're at it, why not plant some bloody trees;
You know what? You probably feel like a badass right now. Lets put a river on it!
Yep. Be proud of your badarse island. Send a bloody postcard to your family!
Keep in mind this is a basic Floating island. I have created better and larger. Please take this and expand on it.
Hell, I would love it if you posted your own creations that you've based off of this!
- To post a comment, please login.