Thanks to both you for the advice, but Paininabox's link was the ticket for me! :biggrin.gif:
Edit - Confirmed! The link was the missing piece of the puzzle!! There's a timing issue where one side takes slightly longer than the other, but what matters is that it works! x3
So, I'm trying to make a bookcase door, and my problem seems to be that everything is working smoothly, but because of my wiring, the pistons sets don't operate in the order I want them to.
The first set of pistons (Set A) push the second set and bookcases into the pathway; the second set (Set B ) then pushes the bookcases, concealing the path.
Simply put -
When I throw the power on, Set A goes first, then Set B. However, when I turn the power off, Set A goes first, then Set B goes off. What I want to do is to have, upon initial power up, Set A to go on, then Set B. Then, on power down, have Set B go off, then Set A.
If a video of my creation would help, I'll gladly make one. I'm sorry if this post doesn't make much sense - first time asking help with redstone and all.
Oh dang, sorry, I guess I need to look harder next time :laugh.gif:
I did have Airship mod and Modloader both installed, along with an airship stored somewhere. I can't remember though if the airship was in THAT chest though..
Anyways, I'll first try to install both of those, then try Johnny's link if that doesn't help!
UPDATE-----
Tried installing both mods. Nada... onto the link!
After the mega 1.6 update, and all the way up to 1.6.4, something strange was happening with a particular double chest in my storage area. At first, whenever I would try to access it (with and without holding an item) it would automatically go to a screen that said "Saving Chunks", followed by a black screen.
After the 1.6.5, I thought the glitch would be cured. But alas, it wasn't. So I thought destroying the double chest then replacing it would solve it. I destroyed the left one - no problem. After I destroyed the right one, the screen immediately went to a dark blue screen, then the black screen from before.
Now, whenever I try to load up the world, it loads up for a split second, I'm in the exact location where I destroyed the second chest, but then it goes back the dark blue screen and thus the black screen.
I can access my other worlds, and even create a new, no problem at all. It's this particular one that I just can't access.
Also, I've worked quite a bit on this world, and would rather not start from scratch :x
1) Cut down tree
2) Make a workbench, pick, mine coal
3) Make a shelter for the night with torches
4) Go out in the morning and kill a pig for food
5) Feel bad about #4
6) Slowly wade out into the water and drown myself
Damn... does that happen only the first time, or is this a daily thing?
Hope I'm not repeating something that's been said/shown already. But I spawned and found these smaller looking spiders that were passive (yeah I know it was day time though). Anyone else seen this? They're kinda adorable.
Anyway, I don't think they would make a save for it before it's fully finished.
This doesn't mean they will do so when it's finished, just saying.
I understand, lol. That's actually was going through my mind as I was typing that earlier post. ^^'
Just because they announced it to the internets doesn't mean they have to fork it over.
@Silod
Haven't seen MCEdit work server side, I don't know I've never used it. Even if it did I don't want to release something we haven't even finished entirely.
^
First off, AM ZING job. THis is just.... amazing. Can barely describe it lol. Just.. truly amazing, sir.
With MCEdit... from what I understand, the save file for the world server acts similarly just like a save file for single-survival. So, theorectically, you could get a schematic of the Colosseum through a copy of the save file? (Yeah, I'm not too brushed up on the art of MCedit either xD)
*edit?* I tested it with my server file, and it loaded up fine (It put me back at spawn). So, it might be an option, if you so choose to give us minecrafting-freeloaders the glory of your creation (and if you can figure out the schematic option).
Very nice flooring technique. I've started on the pit of my own (only the pit... not much of an architect ^^'), and thought the best way was a layer of obsidian underneath a layer of sand (we have /give on the server, so mine won't be as hard earned ^^'). Didn't expect that sort of floor pattern though.. clever
On the mob doors.. if I'm think-guessing at what your thinking, then what about expanding the doorway to 4-wide? (This is assuming that mobs can safely walk on redstone wiring.) I have a completely different set up ( one spawner per set of double doors, 9 spawners.. hopefully, player will be able to control how many are opened at once)
VERY impressive!! The entrance was very well done. How far are you to completion of it? I'm trying to build a monster arena on a server I play on, and I might use yours for inspiration (if that's alright)
Hey, first time posting on the forums... I apologize if this is a simple fix or if it's already been done, but I'm trying to patch the REZCRAFT BETA v0.3, and as soon as I tried to open up Minecraft, I got the ole Black Screen of Doom.
Any help, fellas?
Sounds like the "unchecking the custom water and lava" trick to me
Apologies good sir for the late response.
It worked wonderfully. It lags horribly, even on single player. That was before I applied the FPS fix from the other thread, so I'll try it again once I have access to my file.
0
Age: 21
I haven't voted due to my friend having just registered and voted using my IP - will vote first chance I get.
0
Edit - Confirmed! The link was the missing piece of the puzzle!! There's a timing issue where one side takes slightly longer than the other, but what matters is that it works! x3
0
The first set of pistons (Set A) push the second set and bookcases into the pathway; the second set (Set B ) then pushes the bookcases, concealing the path.
Simply put -
When I throw the power on, Set A goes first, then Set B. However, when I turn the power off, Set A goes first, then Set B goes off. What I want to do is to have, upon initial power up, Set A to go on, then Set B. Then, on power down, have Set B go off, then Set A.
If a video of my creation would help, I'll gladly make one. I'm sorry if this post doesn't make much sense - first time asking help with redstone and all.
0
I did have Airship mod and Modloader both installed, along with an airship stored somewhere. I can't remember though if the airship was in THAT chest though..
Anyways, I'll first try to install both of those, then try Johnny's link if that doesn't help!
UPDATE-----
Tried installing both mods. Nada... onto the link!
0
After the 1.6.5, I thought the glitch would be cured. But alas, it wasn't. So I thought destroying the double chest then replacing it would solve it. I destroyed the left one - no problem. After I destroyed the right one, the screen immediately went to a dark blue screen, then the black screen from before.
Now, whenever I try to load up the world, it loads up for a split second, I'm in the exact location where I destroyed the second chest, but then it goes back the dark blue screen and thus the black screen.
I can access my other worlds, and even create a new, no problem at all. It's this particular one that I just can't access.
Also, I've worked quite a bit on this world, and would rather not start from scratch :x
Thank you in advance to all!
0
That done...
I shall give this map a try once I am not sleep deprived!
0
Damn... does that happen only the first time, or is this a daily thing?
0
Until they grow up and eat out your EYES.
0
I understand, lol. That's actually was going through my mind as I was typing that earlier post. ^^'
Just because they announced it to the internets doesn't mean they have to fork it over.
0
First off, AM
With MCEdit... from what I understand, the save file for the world server acts similarly just like a save file for single-survival. So, theorectically, you could get a schematic of the Colosseum through a copy of the save file? (Yeah, I'm not too brushed up on the art of MCedit either xD)
*edit?* I tested it with my server file, and it loaded up fine (It put me back at spawn). So, it might be an option, if you so choose to give us minecrafting-freeloaders the glory of your creation (and if you can figure out the schematic option).
0
0
On the mob doors.. if I'm think-guessing at what your thinking, then what about expanding the doorway to 4-wide? (This is assuming that mobs can safely walk on redstone wiring.) I have a completely different set up ( one spawner per set of double doors, 9 spawners.. hopefully, player will be able to control how many are opened at once)
0
0
0
Apologies good sir for the late response.
It worked wonderfully. It lags horribly, even on single player. That was before I applied the FPS fix from the other thread, so I'll try it again once I have access to my file.