Found a couple bugs or issues (what ever you like lol).
I placed Lava in a 1x1 hole with cobble on all 4 sides as a lil incinerator thing lol. Anyway, 1 of the cobble blocks will burn, like it's on fire and then goes out. Well this happens to each cobble block that is holding the Lava in and continues periodically, not constitaly.It happens even if it's 1x1, 2x2, or 3x3 ( you get the idea, lol ).
I noticed when in Creative Mode and I break certain Items, they don't delete, only multiply, lol. Minecarts and pictures fill up my dang inventory ( as to why I made an incinerator lol ).
Also my Minecart booster won't work like they did before. I'm sure there's more bugs, I just can't think of them off the top of my head right now.
Hope I put this post in the right section, if not I appoligize. This is me second post. so still learning the forum ( pls move if in wrong section, ty )
Rollback Post to RevisionRollBack
"Be Creative, Play Hard, Mine Harder, and Most of All Have Fun"
I've had a problem with slimes pushing me around in creative. When I was flying about 4 blocks overhead, they kept pushing me around. They were the tiny slimes.
On pre-1.8.2 existing worlds that did not have ice (in some areas), ice is appearing in abundance. A substancial area around my main buildings has been completely decimated by ice that was nowhere near this area before this update. Not sure if this is relevant or not but just before the update I placed several spruce trees near this area that were not there and I'm not sure if the update has mistaken this area for a tundra during the update.
Along with the chest lighting being messed up chests are also being turned in weird directions away from where they were placed, the chest is still "technically" in the right place but visually gets turned sideways (sometimes into walls).
Not sure if these have been noted yet. Sorry if they have.
in my world, some mobs disappear when you look at them. It is mainly spiders and creepers that disappear. It is bad when you're building then an invisible creeper kills you...
And also if you save the game after lighting a TNT on fire, the TNT will not explode after entering the world again.
I think I can help with the old worlds crashing. Feel free to try. "Some of them sometimes works"
- Removing signs (could possibly work)
- Peaceful mode (It helps the world to generate) "not sure"
- Go offline
- Stay away from mobs (Go offline first then load online)
- Stay still after loading game for 1-2 minutes
- Update every block around you offline then load online after
- Take everything out of your inventory offline then load online
- Make sure there's not a lot of movement around you
problem: my leaderboard reset after the 1.8.2 update. i was in the top 2000 on Mining blocks on Peaceful.
I've posted on 4jStudios' twitter page asking for help yet none so far. i scrolled thru all the post by 4jStudios and found a link that led me to this.
Please help. it would be much appreciated.
Thank you.
if you need any info to help fix this problem you can message me on my xbox inbox.
Not sure if this has been mentioned yet but I've recently come across a graphical bug. I built a mob trap tower and it produces a lot of drops and if I let them build up for a while all entities, including animals, start rapidly disappearing and reappearing and the animals are hard to kill because you cannot kill them while they're invisible.
has anyone else had an issue like this? I don't have a capture card so I cannot record the glitch unfortunately.
I found out that its not the drops that are causing this but my chicken farm is. I have a lot of chickens in a small space so they tend to glitch into the walls and stuff and them doing that causes any entity, including all mobs, hostile and passive, within a moderate radius of the chicken farm to disappear and reappear.
Think I stumbled upon a bug here. On this seed: 8938028965351803813
Anything I try to build above the 80th layer, is totally transparent. Regardless of block type, they become invisible when placed. When looking thru these glitches, its like an x-ray of everything beneath. Screenshot of a placed cobblestone to get an idea.
What I’ve built is minimal, because this is a survival only world, and it was created after the latest update. Seems like regardless of where I try on the map, above the 80th layer blocks turn transparent.
problem: my leaderboard reset after the 1.8.2 update. i was in the top 2000 on Mining blocks on Peaceful.
I've posted on 4jStudios' twitter page asking for help yet none so far. i scrolled thru all the post by 4jStudios and found a link that led me to this.
Please help. it would be much appreciated.
Thank you.
if you need any info to help fix this problem you can message me on my xbox inbox.
ANM
Good luck on getting any kind of response on this one. I had the same problem and totally irritated me. Leaderboard Stats should not have been reset just because you download the update. It's not only happened to me but 4 of my friends as well.
Nothing but chickens spawning in pre-patch (1.8.2) world. Did a test (since my world is in a tunda/taiga biome now i e light green grass), by making a new world with the same Seed. Turns out it's an epic ocean biome (which could explain the lack of sheep and wolves) since to my knowledge only chicken can spawn in water. Is there any truth to this 4J?
I think you solved the mystery for me. Since the update my world has been completely void of any animals, other than chickens. Chickens everywhere, but wolves, pigs, sheep and cows are non-existent, except for one location on my map. Extremely rare as it is, once in awhile I’ll find one pig or cow roaming one area of my world. Nowhere else but this one spot, and its only happened a few times. I input my world seed in a new map and explored it, and it’s all ocean except for one little island. Well, sure enough where that island is on the new world, is the same spot on my old world where I sometimes get a rare animal. Coincidence? I think not.
Think I stumbled upon a bug here. On this seed: 8938028965351803813
Anything I try to build above the 80th layer, is totally transparent. Regardless of block type, they become invisible when placed. When looking thru these glitches, its like an x-ray of everything beneath. Screenshot of a placed cobblestone to get an idea.
What I’ve built is minimal, because this is a survival only world, and it was created after the latest update. Seems like regardless of where I try on the map, above the 80th layer blocks turn transparent.
Did you find this with all blocks above layer 80 or just the one you have seen there?.
Could you provide the coordinates for that block?
Rollback Post to RevisionRollBack
Twitter - @4JSteve
Currently Playing - League of Legends (EUW), Tales of Vesperia (PS4) and Kingdom Hearts 2 (PS4)
Feel free to add me on Steam, PSN and XboxLive, Make sure and leave a message saying you are from the forums
does anyone know if this is a glitch when i am playing in either creative or survival i will see a full sized set of legs walk across the top of the screen or one of the top corners and the game is set to invite only and i am the only one on the map please help with this its alittle freaky
1. Void fog will sometimes disappear for an unknown reason
2.Character models in the top left corner will turn green when yo(Sometimes)u hold a green block in creative
3. Fence gates will make the opening sound TWICE with an item in your hand, and it plays properly with just your hand.
4. Redstone has become more laggy, For example, I can no longer have a pressure plated door near a piston bridge.
Nothing but chickens spawning in pre-patch (1.8.2) world. Did a test (since my world is in a tunda/taiga biome now i e light green grass), by making a new world with the same Seed. Turns out it's an epic ocean biome (which could explain the lack of sheep and wolves) since to my knowledge only chicken can spawn in water. Is there any truth to this 4J?
Thanks. This possibly explains why I'm only seeing chickens on my survival island so far.
Good luck on getting any kind of response on this one. I had the same problem and totally irritated me. Leaderboard Stats should not have been reset just because you download the update. It's not only happened to me but 4 of my friends as well.
ya it sucks i'm really upset about this. i spent three weeks straight just getting up to the 65k+ on dirt/sand/cobble/gravel clay was around 7k and obsid: maybe 2k idk..
its crazy i'm not starting over. they need to fix this asap.
Did you find this with all blocks above layer 80 or just the one you have seen there?.
Could you provide the coordinates for that block?
It happened with all block types I had. Sand, gravel, dirt, cobble, brick, fence, ect.., and it wasn't limited to any one spot. Above water or land, didn't seem to matter. From what I could tell its the entire world. The screenshot I posted was right near where the world spawned me, but I tried in several places and it was the same. Above 80, everything placed was invisible. Also, I didn't notice until just last night, but on this same world, crates either single or double, flicker when ever a block update occurs in the surrounding area. Something I've not seen on any of my other worlds.
Well, I just loaded the world again, and now it seems that blocks above 80 are invisible most of the time, but sometimes they do work. Another screenshot here:
This time, it let me build up to 85 before it started glitching, after that it was hit and miss (mostly miss)
The torch above is @ X:71, Y:94, Z:46
In this shot, I'm standing on a floor attached to the vertical column of logs.
I placed Lava in a 1x1 hole with cobble on all 4 sides as a lil incinerator thing lol. Anyway, 1 of the cobble blocks will burn, like it's on fire and then goes out. Well this happens to each cobble block that is holding the Lava in and continues periodically, not constitaly.It happens even if it's 1x1, 2x2, or 3x3 ( you get the idea, lol ).
I noticed when in Creative Mode and I break certain Items, they don't delete, only multiply, lol. Minecarts and pictures fill up my dang inventory ( as to why I made an incinerator lol ).
Also my Minecart booster won't work like they did before. I'm sure there's more bugs, I just can't think of them off the top of my head right now.
Hope I put this post in the right section, if not I appoligize. This is me second post. so still learning the forum ( pls move if in wrong section, ty )
Along with the chest lighting being messed up chests are also being turned in weird directions away from where they were placed, the chest is still "technically" in the right place but visually gets turned sideways (sometimes into walls).
Not sure if these have been noted yet. Sorry if they have.
And also if you save the game after lighting a TNT on fire, the TNT will not explode after entering the world again.
- Removing signs (could possibly work)
- Peaceful mode (It helps the world to generate) "not sure"
- Go offline
- Stay away from mobs (Go offline first then load online)
- Stay still after loading game for 1-2 minutes
- Update every block around you offline then load online after
- Take everything out of your inventory offline then load online
- Make sure there's not a lot of movement around you
problem: my leaderboard reset after the 1.8.2 update. i was in the top 2000 on Mining blocks on Peaceful.
I've posted on 4jStudios' twitter page asking for help yet none so far. i scrolled thru all the post by 4jStudios and found a link that led me to this.
Please help. it would be much appreciated.
Thank you.
if you need any info to help fix this problem you can message me on my xbox inbox.
ANM
I found out that its not the drops that are causing this but my chicken farm is. I have a lot of chickens in a small space so they tend to glitch into the walls and stuff and them doing that causes any entity, including all mobs, hostile and passive, within a moderate radius of the chicken farm to disappear and reappear.
Anything I try to build above the 80th layer, is totally transparent. Regardless of block type, they become invisible when placed. When looking thru these glitches, its like an x-ray of everything beneath. Screenshot of a placed cobblestone to get an idea.
What I’ve built is minimal, because this is a survival only world, and it was created after the latest update. Seems like regardless of where I try on the map, above the 80th layer blocks turn transparent.
Good luck on getting any kind of response on this one. I had the same problem and totally irritated me. Leaderboard Stats should not have been reset just because you download the update. It's not only happened to me but 4 of my friends as well.
Cape glitch. I'm not sure if it has been seen before.
-
View User Profile
-
View Posts
-
Send Message
4J StudiosDid you find this with all blocks above layer 80 or just the one you have seen there?.
Could you provide the coordinates for that block?
Twitter - @4JSteve
Currently Playing - League of Legends (EUW), Tales of Vesperia (PS4) and Kingdom Hearts 2 (PS4)
Feel free to add me on Steam, PSN and XboxLive, Make sure and leave a message saying you are from the forums
1. Void fog will sometimes disappear for an unknown reason
2.Character models in the top left corner will turn green when yo(Sometimes)u hold a green block in creative
3. Fence gates will make the opening sound TWICE with an item in your hand, and it plays properly with just your hand.
4. Redstone has become more laggy, For example, I can no longer have a pressure plated door near a piston bridge.
Thanks. This possibly explains why I'm only seeing chickens on my survival island so far.
ya it sucks i'm really upset about this. i spent three weeks straight just getting up to the 65k+ on dirt/sand/cobble/gravel clay was around 7k and obsid: maybe 2k idk..
its crazy i'm not starting over. they need to fix this asap.
It happened with all block types I had. Sand, gravel, dirt, cobble, brick, fence, ect.., and it wasn't limited to any one spot. Above water or land, didn't seem to matter. From what I could tell its the entire world. The screenshot I posted was right near where the world spawned me, but I tried in several places and it was the same. Above 80, everything placed was invisible. Also, I didn't notice until just last night, but on this same world, crates either single or double, flicker when ever a block update occurs in the surrounding area. Something I've not seen on any of my other worlds.
Well, I just loaded the world again, and now it seems that blocks above 80 are invisible most of the time, but sometimes they do work. Another screenshot here:
This time, it let me build up to 85 before it started glitching, after that it was hit and miss (mostly miss)
The torch above is @ X:71, Y:94, Z:46
In this shot, I'm standing on a floor attached to the vertical column of logs.