Ok, so we know the update is coming out tonight or tomorrow depending on where you live. Now, seeing as how many of the people on here have yet to experience Pistons in all of their glory, I made this little tutorial to show you how to make a 2x2 Piston Door. I have made this on the PC in Creative to give the best possible idea of how to do this. (Sorry only pictures)
Piston Door Tutorial - (optional lock)
Here is what you'll need: 4 Sticky Pistons, 8 Redstone Torches, 4 Stone Pressure Plates,16 Redstone Dust, and a material of your choosing for the door.
STEP 1 - Place your Sticky Pistons and door material like so.
STEP 2 - Place a block, preferably Stone or Cobblestone, on the back of the top Sticky Piston like shown below.
Step 3 - Now, place a Redstone Torch directly under the block you just place on the back of the Sticky Piston. This will activate the PIston Door. Note that the block above the Redstone Torch is important because it carries the Redstone Signal to the top Sticky Piston. Without that block, the top Sticky Piston would not function.
Step 4 - Now, go down two blocks directly below the Redstone Torch from the previous step and place another Redstone Torch. Do this to both sides under each Redstone Torch. This will deactivate the Piston Door.
Step 5 - Now, we will make a Redstone Inverter. This is a little harder to explain so I'll keep it simple and tell you to just look at the picture below to get the idea. Do exactly as the picture shows, to both sides like before and to each side of the door. Not just left and right, but front and back.. As you can see, it will invert the signal, reactivating the Piston Door again.
So it should look like this on both sides.
Step 6 - Now, place Redstone Dust (Wire) between each of the Inverter Torches, so that they are in between the Pistons. Again, do this for both sides, like the wiring for the Redstone Inverter.
Step 7 - Now, you are going to need to make a connection from one side of the wiring to the other. This can be accomplished by connecting the wire laid in Step 6, with wire going directly underneath the door as shown below.
Step 8 - Now, go up two blocks from the Redstone placed in Step 6, and put down two blocks, that are located two blocks from the door. Then put Stone Pressure Plates on those blocks like shown below. Do this to both sides of the door.
Step 9 - Make sure that both sides are working by stepping on the Stone Pressure Plates. The Sticky Pistons should pull the blocks apart, creating a doorway. If they don't, go back and retrace the steps to make sure you didn't miss anything.
Step 10 - Optional Lock - Now that you have it all set up, you can add a simple locking system. I did this pretty fast so it's not the most elegant locking mechanism ever. Just a simple, uncomplicated lock. Just make the Redstone path shown in the picture below and you have a locking system. Please note the this must be done to both the left and right sides of the pistons otherwise only half of the door will lock. Also, you'll need one inside if you want to lock it from the inside.
Minecart Piston Rail Door
Here is what you'll need: 3 Sticky Pistons, 3 Redstone Torches, 2 Redstone Repeaters, 2 Detector Rails, 1 Pressure Plate, 15 Redstone Dust (Wire) and your choice of material for the door.
Step 1 - Place your Sticky Pistons like so. A stack of two on the left, three spaces in between, and then one on the right.
Step 2 - Now, from the center block between the pistons, dig a 9 long, 2 deep, and 1 wide trench. It must be 4 in front and 5 in the back like shown. The Diamond blocks are the front (4) and the Gold is the back (5) Diamond and Gold are just for demonstration.
Step 3 - Now, make a 2 wide, 3 long, and 2 deep hole next to the stack of pistons (shown on the left). Then, make a 1 wide, 3 long, 2 deep hole next to the single piston on the right. (NOTE: that these must be in front of the pistons where the original trench is only 4 long. aka the diamond side in step 2)
Step 4 - Remove the blocks shown as Diamond Blocks exactly as shown in the picture below.
Step 5 - Now, go to the single piston side. Underneath it, where you knocked out the blcoks shown in Step 4, place 2 Redstone Torches and 1 Redstone Repeater exactly like they're pictured below. Make sure the Redstone Repeater is on 1 click.
Step 6 - Go underneath the two stacked pistons, and place 1 Redstone Torch and 3 Redstone Dust (Wire) shown exactly like below. Do not forget to put 1 Redstone Dust (Wire) on the top of the block behind the top piston.
Step 7 - Now, to the left of the stacked pistons in the hole, place 3 Redstone Dust (Wire) and 1 Redstone Repeater like their shown in the picture below.
Step 8 - Now fill the center trench from one end to the other with 9 Redstone Dust (Wire) like shown below. Make sure the Redstone Repeater is on a full 4 clicks.
Step 9 - Now place 3 blocks exactly where the Diamond Blocks are in the picture below. 2 on each end of the center trench, and then one in the center between the pistons.
Step 10 - Now, it's time to practice with it and make sure it works. Place a Pressure Plate on the block in front of the pistons at the end of the center trench. then place your choice of blocks to be used by the Sticky Pistons as the wall/door. Also, place a rail down for the right piston to push and pull to replace the wall/door. Step on the Pressure Plate to make sure the pistons open up correctly like below.
Step 11 - If everything works correctly, carefully cover up all of the wiring and pistons. Make sure you don't break anything while covering it up. Once it's all said and done, it should look like this.
Step 12 - PROFIT!
I know this tutorial is early, but I figured that people should get a heads up on one of the most widely used practices with Pistons. I really hope it helps and that it isn't too confusing. I tried to make it as straight forward as possible. Please let me know if there is anything I can clarify.
(PLEASE TRY TO KEEP THIS ON THE FIRST PAGE OF THE FORUM SO EVERYONE CAN SEE IT AND USE IT IF THEY NEED IT)
Is there a way to disable the charge as a security measure? Say that you're going out into the wilderness to grab some supplies, players are on your server and you want to somehow "lock" the door while you're away...can you just place a redstone torch nearby to disable to pre-made ones somehow? It's kind of how you inverted the charge in the earlier steps.
Thanks McAngus/Mustache Guy I've never used pistons before and wasn't really sure what to do w/them. Quick question though....can they be used at all w/mine tracks,powered rails,and detector rails? What i mean is can you use pistons to move a piece of track to connect to another rail line? like a switcher?
Is there a way to disable the charge as a security measure? Say that you're going out into the wilderness to grab some supplies, players are on your server and you want to somehow "lock" the door while you're away...can you just place a redstone torch nearby to disable to pre-made ones somehow? It's kind of how you inverted the charge in the earlier steps.
Honestly, I'm not sure. I've never though about it before. The easiest way I could see doing that is to break the Pressure Plates.
I'm sure there is a more complicated way, but I was trying to keep it simple lol
Thanks McAngus/Mustache Guy I've never used pistons before and wasn't really sure what to do w/them. Quick question though....can they be used at all w/mine tracks,powered rails,and detector rails? What i mean is can you use pistons to move a piece of track to connect to another rail line? like a switcher?
I've never done it personally, but yes it can be done. I've seen people make hidden entrances with Minecarts that way. Where a wall is replaced with a track, and then back again so it looks like a wall. Very sneaky stuff.
Honestly, I'm not sure. I've never though about it before. The easiest way I could see doing that is to break the Pressure Plates.
I'm sure there is a more complicated way, but I was trying to keep it simple lol
I've never done it personally, but yes it can be done. I've seen people make hidden entrances with Minecarts that way. Where a wall is replaced with a track, and then back again so it looks like a wall. Very sneaky stuff.
Thank God. i definitely wanted to use Pistons like that not to be sneaky though but just when i'm rolling along and want to switch myself to another track and start rolling in a different direction
Thank God. i definitely wanted to use Pistons like that not to be sneaky though but just when i'm rolling along and want to switch myself to another track and start rolling in a different direction
I'm working on it right now to see if I can come up with it lol
Really nice guide, especially for people who have not played the pc and never witnessed the work of pistons!
If you are good with redstone, you should make a guide for a password door system. This guide is easier to understand then most piston door guides so that's why I think you'd be good at other redstone mechanism guides.
Really nice guide, especially for people who have not played the pc and never witnessed the work of pistons!
If you are good with redstone, you should make a guide for a password door system. This guide is easier to understand then most piston door guides so that's why I think you'd be good at other redstone mechanism guides.
I have a long list of things I'm trying. Right now though, I'm trying the whole hidden Minecart rail entrance.
They generate in certain chunks in the lowest part of the world. You'll need to put your seed into a tool or dig out large rooms deep down and see if any spawn.
When I am making the door on my pc, the redstone torches keep burning out. I follow your steps but then they just fizzle when I make the inverter. Would you be able to help me better understand why this is happening?
Piston Door Tutorial - (optional lock)
Here is what you'll need: 4 Sticky Pistons, 8 Redstone Torches, 4 Stone Pressure Plates,16 Redstone Dust, and a material of your choosing for the door.
STEP 1 - Place your Sticky Pistons and door material like so.
STEP 2 - Place a block, preferably Stone or Cobblestone, on the back of the top Sticky Piston like shown below.
Step 3 - Now, place a Redstone Torch directly under the block you just place on the back of the Sticky Piston. This will activate the PIston Door. Note that the block above the Redstone Torch is important because it carries the Redstone Signal to the top Sticky Piston. Without that block, the top Sticky Piston would not function.
Step 4 - Now, go down two blocks directly below the Redstone Torch from the previous step and place another Redstone Torch. Do this to both sides under each Redstone Torch. This will deactivate the Piston Door.
Step 5 - Now, we will make a Redstone Inverter. This is a little harder to explain so I'll keep it simple and tell you to just look at the picture below to get the idea. Do exactly as the picture shows, to both sides like before and to each side of the door. Not just left and right, but front and back.. As you can see, it will invert the signal, reactivating the Piston Door again.
So it should look like this on both sides.
Step 6 - Now, place Redstone Dust (Wire) between each of the Inverter Torches, so that they are in between the Pistons. Again, do this for both sides, like the wiring for the Redstone Inverter.
Step 7 - Now, you are going to need to make a connection from one side of the wiring to the other. This can be accomplished by connecting the wire laid in Step 6, with wire going directly underneath the door as shown below.
Step 8 - Now, go up two blocks from the Redstone placed in Step 6, and put down two blocks, that are located two blocks from the door. Then put Stone Pressure Plates on those blocks like shown below. Do this to both sides of the door.
Step 9 - Make sure that both sides are working by stepping on the Stone Pressure Plates. The Sticky Pistons should pull the blocks apart, creating a doorway. If they don't, go back and retrace the steps to make sure you didn't miss anything.
Step 10 - Optional Lock - Now that you have it all set up, you can add a simple locking system. I did this pretty fast so it's not the most elegant locking mechanism ever. Just a simple, uncomplicated lock. Just make the Redstone path shown in the picture below and you have a locking system. Please note the this must be done to both the left and right sides of the pistons otherwise only half of the door will lock. Also, you'll need one inside if you want to lock it from the inside.
Minecart Piston Rail Door
Here is what you'll need: 3 Sticky Pistons, 3 Redstone Torches, 2 Redstone Repeaters, 2 Detector Rails, 1 Pressure Plate, 15 Redstone Dust (Wire) and your choice of material for the door.
Step 1 - Place your Sticky Pistons like so. A stack of two on the left, three spaces in between, and then one on the right.
Step 7 - Now, to the left of the stacked pistons in the hole, place 3 Redstone Dust (Wire) and 1 Redstone Repeater like their shown in the picture below.
Step 12 - PROFIT!
I know this tutorial is early, but I figured that people should get a heads up on one of the most widely used practices with Pistons. I really hope it helps and that it isn't too confusing. I tried to make it as straight forward as possible. Please let me know if there is anything I can clarify.
(PLEASE TRY TO KEEP THIS ON THE FIRST PAGE OF THE FORUM SO EVERYONE CAN SEE IT AND USE IT IF THEY NEED IT)
Is there a way to disable the charge as a security measure? Say that you're going out into the wilderness to grab some supplies, players are on your server and you want to somehow "lock" the door while you're away...can you just place a redstone torch nearby to disable to pre-made ones somehow? It's kind of how you inverted the charge in the earlier steps.
I'm sure there is a more complicated way, but I was trying to keep it simple lol
I've never done it personally, but yes it can be done. I've seen people make hidden entrances with Minecarts that way. Where a wall is replaced with a track, and then back again so it looks like a wall. Very sneaky stuff.
Thank God. i definitely wanted to use Pistons like that not to be sneaky though but just when i'm rolling along and want to switch myself to another track and start rolling in a different direction
Post it up if you do. I'd love to see exactly how it's done
I just made this as the base tutorial because it's one of the easiest things to make. After that, everything get's a little more complicated.
If you are good with redstone, you should make a guide for a password door system. This guide is easier to understand then most piston door guides so that's why I think you'd be good at other redstone mechanism guides.
They generate in certain chunks in the lowest part of the world. You'll need to put your seed into a tool or dig out large rooms deep down and see if any spawn.
and thanks for the tutorial *bookmarked*
Maybe start over from scratch if you haven't already.
I'm writing it right now.
yes please because it's all I really use pistons for