When will the next update be released? Can you add more screenshots in the screenshots folder?
As soon as the rest of the lattice towers are done, which should be only a few more models. The most complicated model just needs texturing, which is going to take a while. I should be able to add some more screenshots soon.
Well, there has been a major set back with lattice towers. The 500kV self supporting lattice tower decided to not render right and I may have to redo it. That model took about an hour alone, so it'll be a little while until I can finish it. In other words, no screenshots or update. :/
EDIT: Done with the self supporting tower, so I uploaded some screenshots below to show you all. There isn't an update yet though, I need to finish some more lattice tower and tubular steel transmission stuff as well as substation framing/equipment. The update should be out by next week at the latest.
Traffic lights Update Now. For example, do like this:
like this, please do! Please update now! 2.0
I would be very happy if you do!
get real!,get led!, works and more... please do
update ! Traffic Lights 2.0
Well, I should probably get an update soon for Traffic Lights. The issue is I'm trying to get out the Power Lines update which still has quite a bit of work... Another thing- it won't be immediate. It'll take a few days minimum. I can probably add the yellow signals with no black shields, but I'm not adding foreign signals just yet... The first one is from Europe (I'm pretty sure).
I've started to work on it, I am planning on adding the yellow signals you had above, new support structures, and maybe a couple new pedestrian signals. I'm also finishing the Power Lines update, which adds a lot of substation equipment and framing. This includes some models that took over 45 minutes. Sadly, 230kV and 500kV equipment and power lines are not going to be added this update due to the time it would take to add them. They will be put in later on.
Here's a picture of the yellow doghouse type signal. I can't really get anymore screenshots though as I am finishing PowerLines and switching workspaces is a pain. I'll post more screenshots soon, but you can always go look in the screenshots for more.
Sorry, I've been busy at school. The update should come out. I want to have all portions of this mod updated at once, I just had an issue with the PowerLines workspace.
Traffic signal models are almost complete. Just a little bit more work.
The power lines workspace was completely corrupted, so I have to redo a lot of it. Luckily I'm almost done, and I even had the opportunity to use some different models.
I fixed the 2 problems you mentioned above, and most models are complete. I put a picture of the updated signal model below, along with a picture of the new power line models.
Here is another subtransmission screenshot. This one has H-frame and 3-pole 115kV construction. The H frame (on the right) has distribution underbuild.
Can I see some screenshots of the road stuff portion?
Sure! Sorry I haven't gotten back for a while, school has been a pain. All portions are almost out. Below are pictures of the new traffic signals and signs.
I'll be releasing the new update soon (when everything is ready that is). Here is a new screenshot of all the construction signs, cones, and barricades.
Sorry for the long wait! Here are the screenshots you requested plus screenshots of the new road markers and barriers. The update is getting closer by the day. NOTE: Both gantries are still WIP. I plan on changing the models and textures.
The update is getting closer to release! I'm implementing signs (slowly) into the mod, below is a screenshot of the regulatory signs. There are also multiple screenshots of the different creative tabs.
As soon as the rest of the lattice towers are done, which should be only a few more models. The most complicated model just needs texturing, which is going to take a while. I should be able to add some more screenshots soon.
Can I see some screenshots of the towers you have done?
Well, there has been a major set back with lattice towers. The 500kV self supporting lattice tower decided to not render right and I may have to redo it. That model took about an hour alone, so it'll be a little while until I can finish it. In other words, no screenshots or update. :/EDIT: Done with the self supporting tower, so I uploaded some screenshots below to show you all. There isn't an update yet though, I need to finish some more lattice tower and tubular steel transmission stuff as well as substation framing/equipment. The update should be out by next week at the latest.
Well, I should probably get an update soon for Traffic Lights. The issue is I'm trying to get out the Power Lines update which still has quite a bit of work... Another thing- it won't be immediate. It'll take a few days minimum. I can probably add the yellow signals with no black shields, but I'm not adding foreign signals just yet... The first one is from Europe (I'm pretty sure).
I've started to work on it, I am planning on adding the yellow signals you had above, new support structures, and maybe a couple new pedestrian signals. I'm also finishing the Power Lines update, which adds a lot of substation equipment and framing. This includes some models that took over 45 minutes. Sadly, 230kV and 500kV equipment and power lines are not going to be added this update due to the time it would take to add them. They will be put in later on.
TrafficSignals 1.0 adds some, but as I mentioned above I'm adding more in the next few days. I'm also transferring downloads to MediaFire.
Here's a picture of the yellow doghouse type signal. I can't really get anymore screenshots though as I am finishing PowerLines and switching workspaces is a pain. I'll post more screenshots soon, but you can always go look in the screenshots for more.
When will the road stuff portion be released?
Sorry, I've been busy at school. The update should come out. I want to have all portions of this mod updated at once, I just had an issue with the PowerLines workspace.
Traffic signal models are almost complete. Just a little bit more work.
The power lines workspace was completely corrupted, so I have to redo a lot of it. Luckily I'm almost done, and I even had the opportunity to use some different models.
I fixed the 2 problems you mentioned above, and most models are complete. I put a picture of the updated signal model below, along with a picture of the new power line models.
Here is another subtransmission screenshot. This one has H-frame and 3-pole 115kV construction. The H frame (on the right) has distribution underbuild.
Can I see some screenshots of the road stuff portion?
I'm planning on adding them without a black backplate (I grew up in Utah with 'em).
Sure! Sorry I haven't gotten back for a while, school has been a pain. All portions are almost out. Below are pictures of the new traffic signals and signs.
I'll be releasing the new update soon (when everything is ready that is). Here is a new screenshot of all the construction signs, cones, and barricades.
I can not wait for your new update ,man ! I am actually enjoying this mod very much ! Keep up the good work !
Glad to here it! Gantries, traffic signs, and road surfaces are the last things that need to be added.
Can I see some screenshots of the gantries?
Sorry for the long wait! Here are the screenshots you requested plus screenshots of the new road markers and barriers. The update is getting closer by the day. NOTE: Both gantries are still WIP. I plan on changing the models and textures.
The update is getting closer to release! I'm implementing signs (slowly) into the mod, below is a screenshot of the regulatory signs. There are also multiple screenshots of the different creative tabs.