I have the latest version of mekanism, mek tools and mek gens. And when ever my machines operate (like my 3x ore process) my game drops in fps considerably from around 80 (I have it set to 80)
To 15-20. But only when the machines are active. Anyone have any ideas on how I can maybe fix this?
supposedly mekanism is the cause of why mobs keep spawning 1 block (or closer, i've had a creeper spawn touching me, explode before i knew it was there, followed by an identical respawn less than a full second after the first detonated) from the player repeatedly?
is that true?
i've had it happen multiple times in full daylight as well and we don't have minetweaker, or any other similar griefing mods that do this the last time either.
Rollback Post to RevisionRollBack
24 hours gone again, wasted in futility, welcome to minecraft modding, that is (unfortunately) our community.
(an ode to minecraft modding)
i keep making the same mistake, i think "oh, i've given them a few months, surely it'll be fixed by now" THAT is why i seem to ALWAYS be angry to some of you, my advice is to get the lead out.
there were nice things here, until the mod author threw a tantrum.
I know the latest version of minecraft is better and all but 1.6.4- to 1.7+ causes huge framerate drops and makes the game totally unplayable for me and several thousand other players so I ask can you easily port mekanism 8 to 1.6.4 for use in my modpack because I love your latest update but I don't want 0-15 fps while using it
Ps. I have msi twinfrozr III oc edition 950mhz 1024 cores and 1250mhz 2gb gddr5 256bit so I have no Idea why I can't run minecraft 1.7+ reasonably
I know the latest version of minecraft is better and all but 1.6.4- to 1.7+ causes huge framerate drops and makes the game totally unplayable for me and several thousand other players so I ask can you easily port mekanism 8 to 1.6.4 for use in my modpack because I love your latest update but I don't want 0-15 fps while using it
Ps. I have msi twinfrozr III oc edition 950mhz 1024 cores and 1250mhz 2gb gddr5 256bit so I have no Idea why I can't run minecraft 1.7+ reasonably
This isn't a mek issue but an issue on how you have your graphics setting - which this is the wrong forum and section for.
Just a quick question concerning this mod: every time I install all three mods, I can't load up a saved game or start a new one. I was just wondering why this may be the case and what I could do to fix it. Also apologies if this has been asked before. I couldn't find anything through Google.
Nothing crashes, by the way, I just simply can't play.
I've as of the most recent update, found an issue with NEI. Whenever a page with the portable tanks loads, Minecraft stops responding. All other searches seem to be clear. But as soon as a portable tank should show up in the search bar, BAM, the game stops responding. Will try downgrading to a prior release of Mekanism and seeing if this rectifies the issue temporarily.
Yeah I just now found this. I apologize for my prior post, as it is now obviously unnecessary. (I also found the problem was completely unrelated to Mekanism, so further apologies)
Yeah I just now found this. I apologize for my prior post, as it is now obviously unnecessary. (I also found the problem was completely unrelated to Mekanism, so further apologies)
Would like to see what you did to fix this. It's been breaking things for me since forever. :\
Yes, there are mods that intentionally add impossible fluids to the game (like stuff that was never intended to be rendered). Option to disabling automatic generation of prefilled tanks in NEI/Creative was necessary.
Plus all the people playing on toasters that choke on rendering 100+ fluid tanks at at the same time.
I'll have you know that my computer is almost as good as two toasters.
Would like to see what you did to fix this. It's been breaking things for me since forever. :\
I'll have you know that my computer is almost as good as two toasters.
The problem was with a massively outdated version of Ender Storage, and the Ender Tank not being updated to work with the new format that Forge used for handling fluids. I simply removed it and bang, all was good, though I might install an up-to-date version because simply making Tesseracts from Thermal Expansion just to pump brine from my salination towers seems a bit excessive...
However, like stated earlier, disabling the prefilled tanks helped, and same with INPure Core being installed. Went from 200+ NEI pages to 43.
Well, I got the game to load Mekanism and what I've played with so far is really enjoyable. There is one problem, though: I keep getting seemingly random power outages. By that I mean the pipes, for no apparent reason, suddenly stop transmitting power. I have power being generated using wind turbines and have an energy cube storing the power, transmitting it appropriately from the panel.
Even with a full cube, the power just stops going into any of my machines.
I'm wondering if this is a user error or something else, and if there's anything I could do to alleviate this issue.
A gauge on the gas tank is a cool idea, but MCF is not a good place to get it noticed by ACB.Try the github instead
So noted. Will do.
http://ci.indiewikis.com:8080/job/Mekanism/changes
I have the latest version of mekanism, mek tools and mek gens. And when ever my machines operate (like my 3x ore process) my game drops in fps considerably from around 80 (I have it set to 80)
To 15-20. But only when the machines are active. Anyone have any ideas on how I can maybe fix this?
supposedly mekanism is the cause of why mobs keep spawning 1 block (or closer, i've had a creeper spawn touching me, explode before i knew it was there, followed by an identical respawn less than a full second after the first detonated) from the player repeatedly?
is that true?
i've had it happen multiple times in full daylight as well and we don't have minetweaker, or any other similar griefing mods that do this the last time either.
24 hours gone again, wasted in futility, welcome to minecraft modding, that is (unfortunately) our community.
(an ode to minecraft modding)
i keep making the same mistake, i think "oh, i've given them a few months, surely it'll be fixed by now" THAT is why i seem to ALWAYS be angry to some of you, my advice is to get the lead out.
there were nice things here, until the mod author threw a tantrum.
I know the latest version of minecraft is better and all but 1.6.4- to 1.7+ causes huge framerate drops and makes the game totally unplayable for me and several thousand other players so I ask can you easily port mekanism 8 to 1.6.4 for use in my modpack because I love your latest update but I don't want 0-15 fps while using it
Ps. I have msi twinfrozr III oc edition 950mhz 1024 cores and 1250mhz 2gb gddr5 256bit so I have no Idea why I can't run minecraft 1.7+ reasonably
How do you disable the logistical sorter sound? It even ignores the block volume setting in mc very annoying.
Tried setting all the different sound settings in the config to false and all the volume settings to 0.0 and the damn sorter still clicks loudly.
This isn't a mek issue but an issue on how you have your graphics setting - which this is the wrong forum and section for.
Hello guys,I want to know if there is any way for the mekanism pipes to connect with other mods' pipes (e.g. Thermal Expansion.............)
Hi All,
Is there an easy way to stop 2 mechanical pipes from joining if I am planning to run 2 different fluids?
Hmm,put a forge microblock between them,that should work
is there any way to get this to generate slurry, crystals, ect for ores that drop themselves?
Come check out my pack and tell me what you think.
Ore dictionary + the mod 'Another One Bites The Dust'
Why? Just use the pipes to connect to the machines.
My Mods:
Fool's gold & other dumb things
Placebo Effect
Two others that I am pretending don't exist.
Also, Modding Theory.
Hey all! Hope all is going well for you. =-)
Just a quick question concerning this mod: every time I install all three mods, I can't load up a saved game or start a new one. I was just wondering why this may be the case and what I could do to fix it. Also apologies if this has been asked before. I couldn't find anything through Google.
Nothing crashes, by the way, I just simply can't play.
Thanks, and take care!
I've as of the most recent update, found an issue with NEI. Whenever a page with the portable tanks loads, Minecraft stops responding. All other searches seem to be clear. But as soon as a portable tank should show up in the search bar, BAM, the game stops responding. Will try downgrading to a prior release of Mekanism and seeing if this rectifies the issue temporarily.
EDIT: Downgrading did not fix the issue.
Yeah I just now found this. I apologize for my prior post, as it is now obviously unnecessary. (I also found the problem was completely unrelated to Mekanism, so further apologies)
Would like to see what you did to fix this. It's been breaking things for me since forever. :\
I'll have you know that my computer is almost as good as two toasters.
My Mods:
Fool's gold & other dumb things
Placebo Effect
Two others that I am pretending don't exist.
Also, Modding Theory.
ok so i found in the aobd config how to do it. but what is the extra and energy values they have?
Come check out my pack and tell me what you think.
The problem was with a massively outdated version of Ender Storage, and the Ender Tank not being updated to work with the new format that Forge used for handling fluids. I simply removed it and bang, all was good, though I might install an up-to-date version because simply making Tesseracts from Thermal Expansion just to pump brine from my salination towers seems a bit excessive...
However, like stated earlier, disabling the prefilled tanks helped, and same with INPure Core being installed. Went from 200+ NEI pages to 43.
Hope this helped.
Hey again. =-)
Well, I got the game to load Mekanism and what I've played with so far is really enjoyable. There is one problem, though: I keep getting seemingly random power outages. By that I mean the pipes, for no apparent reason, suddenly stop transmitting power. I have power being generated using wind turbines and have an energy cube storing the power, transmitting it appropriately from the panel.
Even with a full cube, the power just stops going into any of my machines.
I'm wondering if this is a user error or something else, and if there's anything I could do to alleviate this issue.
Thanks, and take care!