Since 1.5_01, whenever I try to break a block of any kind, the game freezes and then closes itself. But when i uninstall this texture pack it works fine. Solution???
Since 1.5_01, whenever I try to break a block of any kind, the game freezes and then closes itself. But when i uninstall this texture pack it works fine. Solution???
You can blame notch for that. He ****ed up again. Just wait for 1.5_02..
ALL OF YOU:
For the version that works with 1.5, go DOWNLOAD THE v30 LISTED ON THE FRONT PAGE!!!!!
Then, save the terrain file below over the terrain.png in the Mixcraft HD.zip. Patch Minecraft and it will work.
DO NOT ATTEMPT THIS BEFORE REPLACING THE TERRAIN FILE!
So, in step-by-step instructions:
1. Go to the OP and find the smaller download link for Koolwitak's v30 Prototype - it has a warning that it will ONLY work for 1.5. Extract this file to get the normal folders for Mixcraft Basic and Mixcraft HD, as well as the zipfiles within.
2. Download the terrain image above
3. Make sure it is named "terrain.png"
4. Place it inside the Mixcraft HD.zip file
5. Patch the game with either the old version of Xau's patch, or the Beta one, which is linked to on the main patcher thread. If you use the old one, be certain to select the Mixcraft HD.zip file as the texture pack. If you use the new (MCPatcher Beta 4), I suggest you place the Mixcraft HD.zip in the texturepacks folder.
That is all. You may stop complaining now.
Thankyou. :biggrin.gif:
Hmm...the old patcher which came with the v30.zip caused my game to instantly crash if I place any blocks...gonna go try re-patching.
ALL OF YOU:
For the version that works with 1.5, go DOWNLOAD THE v30 LISTED ON THE FRONT PAGE!!!!!
Then, save the terrain file below over the terrain.png in the Mixcraft HD.zip. Patch Minecraft and it will work.
DO NOT ATTEMPT THIS BEFORE REPLACING THE TERRAIN FILE!
So, in step-by-step instructions:
1. Go to the OP and find the smaller download link for Koolwitak's v30 Prototype - it has a warning that it will ONLY work for 1.5. Extract this file to get the normal folders for Mixcraft Basic and Mixcraft HD, as well as the zipfiles within.
2. Download the terrain image above
3. Make sure it is named "terrain.png"
4. Place it inside the Mixcraft HD.zip file
5. Patch the game with either the old version of Xau's patch, or the Beta one, which is linked to on the main patcher thread. If you use the old one, be certain to select the Mixcraft HD.zip file as the texture pack. If you use the new (MCPatcher Beta 4), I suggest you place the Mixcraft HD.zip in the texturepacks folder.
That is all. You may stop complaining now.
Thankyou. :biggrin.gif:
Hmm...the old patcher which came with the v30.zip caused my game to instantly crash if I place any blocks...gonna go try re-patching.
Having the same problem. The old patcher is now.. dead.. *sigh*
Best texture ever!!!!!!!!!!!
But i always have to change the lava to gerudoku one, iron diamond and gold blocks to cherrypicked ones and the cobble to old mixcraft, apart from that the texture is the best i ever seen. Keep on updating it!
ALL OF YOU:
For the version that works with 1.5, go DOWNLOAD THE v30 LISTED ON THE FRONT PAGE!!!!!
Then, save the terrain file below over the terrain.png in the Mixcraft HD.zip. Patch Minecraft and it will work.
DO NOT ATTEMPT THIS BEFORE REPLACING THE TERRAIN FILE!
So, in step-by-step instructions:
1. Go to the OP and find the smaller download link for Koolwitak's v30 Prototype - it has a warning that it will ONLY work for 1.5. Extract this file to get the normal folders for Mixcraft Basic and Mixcraft HD, as well as the zipfiles within.
2. Download the terrain image above
3. Make sure it is named "terrain.png"
4. Place it inside the Mixcraft HD.zip file
5. Patch the game with either the old version of Xau's patch, or the Beta one, which is linked to on the main patcher thread. If you use the old one, be certain to select the Mixcraft HD.zip file as the texture pack. If you use the new (MCPatcher Beta 4), I suggest you place the Mixcraft HD.zip in the texturepacks folder.
That is all. You may stop complaining now.
Thankyou. :biggrin.gif:
Hmm...the old patcher which came with the v30.zip caused my game to instantly crash if I place any blocks...gonna go try re-patching.
Having the same problem. The old patcher is now.. dead.. *sigh*
*downloads new one*
New patcher doesn't work for me...I guess I'm using default textures...
Hey guy, I love your texture pack. I modified it slightly for my own use and when 1.5 came out i just went right ahead and made my own powered rail and button rail and re-applied it.
worked fine on 1.5, but now with 1.5_01 I'm getting game crashes on block place or block break. I'm wondering, other than the png files, is there anything that changes that might be causing this? Since this is a "HD" texture pack.. I'm not sure how mcpatcher does it's thing.. I might wait till you come out with your version, then apply my changes back to it.
Hello, everything works fine for me except the Lava animation (it doesn't work at all). I'm using Mixcraft v30 and I used mcpatcher 2.0 beta4 to patch the game. Does anyone know what's wrong?
When exactly are you planing on releasing 1.5_01???
What? There's a v30 pack posted on the last page by Kris Eike, which he fixed for 1.5. MC 1.5_01.. well, we don't have to change anything, seeing as its just a bugfix release.
You need the newest patcher to use this pack with 1.5+
I DID use the latest patcher. It doesn't make anything HD. It just screws everything up.
Make sure all the options are correct. And what do you mean it "screws everything up"?
Make sure you've actually extracted the zipfile you downloaded, because there's two different packs in the download.
Quote from Mmeister »
Hello, everything works fine for me except the Lava animation (it doesn't work at all). I'm using Mixcraft v30 and I used mcpatcher 2.0 beta4 to patch the game. Does anyone know what's wrong?
Go to the options tab and make sure the lava is set to "custom animation". Also, if you fix the lava and notice anything else screwed up, use Kris Eike's compatible pack; Koolwitak messed up the grass edges a bit.
ATTENTION:
Please note that the v30 pack in the OP does not work correctly. For your convenience, I have mirrored the Mixcraft HD v30 pack fixed by Kris Eike here: http://www.mediafire.com/?an48z3ug2387zq8
Simply download this and patch it in with MCPatcher; or place it in the texturepacks folder if you're using the beta4 patcher.
Tried the new link and it installs fine via the mcpatcher but crashes mc if i try to break a block. Thanks for putting the time in even if it does not work for me =)
Best Texture pack i have ever used. But for the basic 1.5 beta version the side of grass is see through which makes it possible to see trough to the base rock and caverns/caves. if this can be fixed please let me know. Great texture pack though.
Download the version I linked above. It fixes that.\
EDIT: Wait... the basic? 16x16? Nobody's fixed that one yet... I haven't time to do it right now. Perhaps Kris can help ya.
Just a quick question... did you make the two tiles below the Redstone wires transparent? If not, they'll look bluish - someone discovered that the tiles immediately below the redstone textures are an overlay for them or some such...
Yeah, that was me. :smile.gif: Thanks to you and Kris for updating the terrain.png. I tried to get the mods to sticky my thread on the issue but they apparently had more pressing concerns.
Rollback Post to RevisionRollBack
"Don't know why you should feel that there's something to learn... it's just a game that you play."
When exactly are you planing on releasing 1.5_01???
What? There's a v30 pack posted on the last page by Kris Eike, which he fixed for 1.5. MC 1.5_01.. well, we don't have to change anything, seeing as its just a bugfix release.
You need the newest patcher to use this pack with 1.5+
I DID use the latest patcher. It doesn't make anything HD. It just screws everything up.
Make sure all the options are correct. And what do you mean it "screws everything up"?
Make sure you've actually extracted the zipfile you downloaded, because there's two different packs in the download.
Quote from Mmeister »
Hello, everything works fine for me except the Lava animation (it doesn't work at all). I'm using Mixcraft v30 and I used mcpatcher 2.0 beta4 to patch the game. Does anyone know what's wrong?
Go to the options tab and make sure the lava is set to "custom animation". Also, if you fix the lava and notice anything else screwed up, use Kris Eike's compatible pack; Koolwitak messed up the grass edges a bit.
ATTENTION: Please note that the v30 pack in the OP does not work correctly. For your convenience, I have mirrored the Mixcraft HD v30 pack fixed by Kris Eike here: http://www.mediafire.com/?an48z3ug2387zq8
Simply download this and patch it in with MCPatcher; or place it in the texturepacks folder if you're using the beta4 patcher.
What if I did both of those and the lava is still not working?
Rollback Post to RevisionRollBack
To post a comment, please login or register a new account.
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumYou can blame notch for that. He ****ed up again. Just wait for 1.5_02..
Hmm...the old patcher which came with the v30.zip caused my game to instantly crash if I place any blocks...gonna go try re-patching.
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumHaving the same problem. The old patcher is now.. dead.. *sigh*
*downloads new one*
But i always have to change the lava to gerudoku one, iron diamond and gold blocks to cherrypicked ones and the cobble to old mixcraft, apart from that the texture is the best i ever seen. Keep on updating it!
New patcher doesn't work for me...I guess I'm using default textures...
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumYou need the newest patcher to use this pack with 1.5+
Watching it blow up after it is all done...
Hey guy, I love your texture pack. I modified it slightly for my own use and when 1.5 came out i just went right ahead and made my own powered rail and button rail and re-applied it.
worked fine on 1.5, but now with 1.5_01 I'm getting game crashes on block place or block break. I'm wondering, other than the png files, is there anything that changes that might be causing this? Since this is a "HD" texture pack.. I'm not sure how mcpatcher does it's thing.. I might wait till you come out with your version, then apply my changes back to it.
This is the Mixcraft 32x32 version COMPITABLE WITH 1.5[/quote]
does anyone have an alternative to this download link? drop says its maxed out
I DID use the latest patcher. It doesn't make anything HD. It just screws everything up.
Make sure all the options are correct. And what do you mean it "screws everything up"?
Make sure you've actually extracted the zipfile you downloaded, because there's two different packs in the download.
Go to the options tab and make sure the lava is set to "custom animation". Also, if you fix the lava and notice anything else screwed up, use Kris Eike's compatible pack; Koolwitak messed up the grass edges a bit.
ATTENTION:
Please note that the v30 pack in the OP does not work correctly. For your convenience, I have mirrored the Mixcraft HD v30 pack fixed by Kris Eike here:
http://www.mediafire.com/?an48z3ug2387zq8
Simply download this and patch it in with MCPatcher; or place it in the texturepacks folder if you're using the beta4 patcher.
Donate to help me buy people Minecraft accounts!
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumWell, at least my texture packs are popular! XD
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumCheck out this: viewtopic.php?f=1021&t=297868
Download the version I linked above. It fixes that.\
EDIT: Wait... the basic? 16x16? Nobody's fixed that one yet... I haven't time to do it right now. Perhaps Kris can help ya.
Donate to help me buy people Minecraft accounts!
Yeah, that was me. :smile.gif: Thanks to you and Kris for updating the terrain.png. I tried to get the mods to sticky my thread on the issue but they apparently had more pressing concerns.
What if I did both of those and the lava is still not working?