R and F go up and down, then the carrot on a stick directs it around. Otherwise it just goes straight. And keep it out of water, it's a son of a gun to get them out of deep water. They don't float, they have to climb out from the bottom, adults are 5 blocks wide, and you can't ride them underwater. At least in 1.8. So watch leading them across deep rivers.
Do you interested in some enderdragon textures? these textures no longer have home and as the one who hatches them I feel sad.. (it was part of voxelbox texturepack).
It's really quite disappointing to see everyone who asks about how to fly a dragon. I mean, it should be obvious...it works exactly like a horse, except with R and F controlling altitude. It leaves me to wonder what some people think the "Press R and F to fly up and down" popup means when you get on a dragon. Or whether they even read the OP...
Is it normal for travelling between the Nether and Overworld to reset the dragons back into eggs?
Edit: Ok that's a bug, if you do anything that causes unloaded of whatever world the dragons are in (I.E, travelling to the Nether/ End, or exiting to the main menu) will reset the dragons back into eggs as if you had just placed them down, however the dragon type does not change, and where they were when they were reset they will still be there
I have a glitch going on 1.8 on one game where most of my eggs want to turn into forest dragons, so I tried to turn my ender back into an ender. How do you turn a dragon into a plain ender dragon? I've tried "/dragon breed ender", /dragon breed works on the other 7 that I'm aware of but not the ender. I've tried "plain", "generic", "black", "ender", "Ender", and I can't remember what others I may have tried. Is it another glitch? Can't seem to figure it out, or did they just not bother to do it for the ender dragon thinking that no one would want a plain black dragon?
It was covered just a few posts up. If you leave an area the game turns them back into eggs, but the information attached to that egg is saved. Saddle and everything, it's all still there. Just turn it back with "/dragon stage adult" or "/dragon stage hatchling".
What I want to know is how to turn another breed into a plain ender dragon because my eggs have been defaulting to forest. /dragon breed ender doesn't work, is there something other than "ender" I should be using in the command?
It was covered just a few posts up. If you leave an area the game turns them back into eggs, but the information attached to that egg is saved. Saddle and everything, it's all still there. Just turn it back with "/dragon stage adult" or "/dragon stage hatchling".
What I want to know is how to turn another breed into a plain ender dragon because my eggs have been defaulting to forest. /dragon breed ender doesn't work, is there something other than "ender" I should be using in the command?
That command should work perfectly, and has in previous versions. Likelihood is it's a bug that causes the Forest dragon breed to override the Ender dragon breed when running that command.
It works for me, also i've been trying to get a fire dragon but I can't, and the only way I can get a Nether dragon is by putting the egg in the Nether, i've even used Too Much TNT's Hell's Gate TNT to make a platform to put the egg on in the Overworld but I can only get a Nether Dragon in the Nether and I can't get a fire dragon at all, i've tried surrounding it with both fire and lava
It was covered just a few posts up. If you leave an area the game turns them back into eggs, but the information attached to that egg is saved. Saddle and everything, it's all still there. Just turn it back with "/dragon stage adult" or "/dragon stage hatchling".
What I want to know is how to turn another breed into a plain ender dragon because my eggs have been defaulting to forest. /dragon breed ender doesn't work, is there something other than "ender" I should be using in the command?
I love new animal's in MineCraft , so this is a great mod for me! I also like that it adds a new and fun way to travel. And the fact that its also a new pet. My favorite dragon would be a fire dragon. Especially when a baby! SOOOO CUTEEEE!!! AWWWW!!!
I love this mod but it doesn't seem to be compatible with my other mods because when I load the game with this mod and my other mods installed it immediately crashes the game, but when I load the game with this mod by itself it works just fine so i think it is a bug in the mod.
P.S. i am using Minecraft version 1.7.10 and the recommended forge version 10.13.4.1448
What actually happens is when i spawn any entity from the mod such as right click the dragon egg or spawn in a dragon mount it immediatly crashes the game.
I love this mod but it doesn't seem to be compatible with my other mod because when I load the game with this mod and my other mods installed it immediately crashes the game, but when I load the game with this mod by itself it works just fine so i think it is a bug in the mod.
P.S. i am using Minecraft version 1.7.10 and the recommended forge version 10.13.4.1448
I love them perhaps they could be incorporated as a new breeds pls?
Maybe along with new breeds we could add a smaller breed of dragon? much more ideal or a house dragon that stays is about the size of a hatchling
R and F go up and down, then the carrot on a stick directs it around. Otherwise it just goes straight. And keep it out of water, it's a son of a gun to get them out of deep water. They don't float, they have to climb out from the bottom, adults are 5 blocks wide, and you can't ride them underwater. At least in 1.8. So watch leading them across deep rivers.
Ice and Fire: Dragons in a whole new light
Everyone that's asking for a new breed, there is a tutorial by Stryker over here. It's relatively easy.
http://www.minecraftforum.net/forums/mapping-and-modding/mapping-and-modding-tutorials/2421933-tutorial-how-to-add-custom-breeds-to
can i put this in a modpack
These unfortunately are not in the skin format that this mod uses. They need some rearranging of the parts before they can work with this mod.
It's really quite disappointing to see everyone who asks about how to fly a dragon. I mean, it should be obvious...it works exactly like a horse, except with R and F controlling altitude. It leaves me to wonder what some people think the "Press R and F to fly up and down" popup means when you get on a dragon. Or whether they even read the OP...
Is it normal for travelling between the Nether and Overworld to reset the dragons back into eggs?
Edit: Ok that's a bug, if you do anything that causes unloaded of whatever world the dragons are in (I.E, travelling to the Nether/ End, or exiting to the main menu) will reset the dragons back into eggs as if you had just placed them down, however the dragon type does not change, and where they were when they were reset they will still be there
Ice and Fire: Dragons in a whole new light
My dragons keep turning back into eggs... why is this?
It was covered just a few posts up. If you leave an area the game turns them back into eggs, but the information attached to that egg is saved. Saddle and everything, it's all still there. Just turn it back with "/dragon stage adult" or "/dragon stage hatchling".
What I want to know is how to turn another breed into a plain ender dragon because my eggs have been defaulting to forest. /dragon breed ender doesn't work, is there something other than "ender" I should be using in the command?
Ice and Fire: Dragons in a whole new light
That command should work perfectly, and has in previous versions. Likelihood is it's a bug that causes the Forest dragon breed to override the Ender dragon breed when running that command.
It works for me, also i've been trying to get a fire dragon but I can't, and the only way I can get a Nether dragon is by putting the egg in the Nether, i've even used Too Much TNT's Hell's Gate TNT to make a platform to put the egg on in the Overworld but I can only get a Nether Dragon in the Nether and I can't get a fire dragon at all, i've tried surrounding it with both fire and lava
I've heard something about a Sylphid Dragon? I'm confused I thought there was only 5 not 6???
Sylphid = Water. I think PopularMMO's showcase vid covers all the breeds.
Normal sig clutter below:
it does, however is a bit of an older version. DanTDM has reviewed a more recent one and does the commands.
also, yes. Syphilid = water and Aether = air. use water/air accordingly.
The correct variable is "end" not "ender"
im going to use the mod for my server play.dragoncraft.us im a adimn on it and im LegendaryDragon2
I love new animal's in MineCraft , so this is a great mod for me! I also like that it adds a new and fun way to travel. And the fact that its also a new pet. My favorite dragon would be a fire dragon. Especially when a baby! SOOOO CUTEEEE!!! AWWWW!!!
I love this mod but it doesn't seem to be compatible with my other mods because when I load the game with this mod and my other mods installed it immediately crashes the game, but when I load the game with this mod by itself it works just fine so i think it is a bug in the mod.
P.S. i am using Minecraft version 1.7.10 and the recommended forge version 10.13.4.1448
What actually happens is when i spawn any entity from the mod such as right click the dragon egg or spawn in a dragon mount it immediatly crashes the game.
How about a crash log so we can help you?