Minecraft Forums

Quote from Glocksna»

Love this mod, I'm using it on a 1.6.4 modded server and noticed that the placer doesn't differentiate blocks with different metadata (Smeltery blocks for instance are all the same block id with a different metadata) so when you create a building out of, say Seared Stone and Seared CobbleStone (1474:4 and 1474:5 respectively) it will not place the correct block in the correct place but instead just vomit out whatever you have in your inventory with an ID of 1474 regardless of meta data. The blueprint will show the correct blocks though which is why this is weird to me. Is there a way to fix this in 1.6.4 or will I just have to deal with it in older packs?
What's even funnier is when it does this it will highlight the blocks it placed in the wrong place. E.G: http://img.techpowerup.org/141023/Capture768.jpg

The printer and the renderer are separate. The renderer will mark any block with different orange, no matter it's ID/state. As for the printer, all metadata exclusions were hardcoded. It would require too much work to add mod support for that in 1.6. Even in 1.7 it was a PITA to figure out something that works nicely (still have to add mod blocks, but it's WAY easier now, all it requires is the block name).

Short answer, you'll have to deal with it in older packs. There's quite a few modpacks out for 1.7.10 (ModSauce, Bevo's TechPack, ...) and a few upcoming ones (dw20, ...). It's been almost a year since 1.7.10 started and it's about time things move on. We're getting close to 1.8 anyway.

Quote from Beringtom»

I actually thought something like the printer was easyer now, thought blocks was registed in Forge with names and not ID's

But in any case, I love this mod, build something fancy in creative SP, make a schematic and build in MP SV

It is, the code that supports the addition of mod blocks is in place, but I don't feel like going over hundreds of mods to manually add support for them.

I may try to write up some instructions to allow players to help out with it.

Quote from monkeybeeee1»

Schematica is there a download for the 1.6.4 verion? if the mod was a round back then??

downgrading my modpack bc arsmagic 2 is to buggy atm and want to bring my houses but not the world added some and removed some mods

Quote from SGT_Creeper»

is there a way to make schematica recognize microblocks?

None right now. I looked a bit into it and it's quite a mess. The fact that CBMP (FMP) is written in scala makes it even harder to debug stuff.

Quote from monkeybeeee1»

me am stupid didt see it on op so thort the links sent u to ad.fly > mediafile / dropbox

Adfly? I haven't used adfly for months.

Quote from timgameMC»

Can i copy a schematic from a singleplayer world and make a hologramm of it on a multiplayer server? If yes that is exactly the mod i searched for. Unfortunately the server I'm playing on is on 1.8. I hope this mod will be updated.

Yes. You can import them anywhere you like to, can even share them with friends.

Quote from lucasw89»

Hello. First i want to say: Great mod. I'm just here to give a suggestion. ability to search schematics? Just a suggestion.

Keep up the great work Lunatrius

-lucasw89

You mean filtering the schematics when you're opening a schematic? Shouldn't be too hard, did something similar in InGame Info XML.

ok post got removed so i'll try again.

excellent mod that schematica. although i've had a couple odd issues.

created a building in my single player flatworld (creative). saved the schematic with schematica.

logged into my multiplayer world and loaded the schematic.

now yesterday it loaded but some of the blocks (stairs/double chests) were not rotated correctly. the printer would still print them (in the incorrect orientation as displayed) and i'd have to remove the object and replace it, with schematica showing it as a red block. now today i loaded it up and it seemed fine and printed as usual. so that issue seems to be intermittent.

the other issue is that the material list is all wonky with the same icon showing for multiple objects and the names being completely wrong, which of course, wouldn't let me print the actual object because of the different name.

for instance. in my inventory i show 2 doors (which my building only has one) printed fine but if it wasn't a door i may have made more than i needed.

another for instance. my inventory shows the icon for stone brick, named stone brick monster egg, amount 1500. so normal stone brick won't print i'm assuming because of the bad name.

another shows the stone brick icon and says stone bricks slab. but then i have another that has the stone brick slab icon and also says stone brick slab. one shows amount as 8 and the other shows 192. stone brick slabs print fine and i'm assuming it's the 192 amount but....yeah....

any ideas? other than those issues this mod is still a massive time saver.

thanks in advance

Quote from clockworkmcd»

ok post got removed so i'll try again.

excellent mod that schematica. although i've had a couple odd issues.

created a building in my single player flatworld (creative). saved the schematic with schematica.

logged into my multiplayer world and loaded the schematic.

now yesterday it loaded but some of the blocks (stairs/double chests) were not rotated correctly. the printer would still print them (in the incorrect orientation as displayed) and i'd have to remove the object and replace it, with schematica showing it as a red block. now today i loaded it up and it seemed fine and printed as usual. so that issue seems to be intermittent.

the other issue is that the material list is all wonky with the same icon showing for multiple objects and the names being completely wrong, which of course, wouldn't let me print the actual object because of the different name.

for instance. in my inventory i show 2 doors (which my building only has one) printed fine but if it wasn't a door i may have made more than i needed.

another for instance. my inventory shows the icon for stone brick, named stone brick monster egg, amount 1500. so normal stone brick won't print i'm assuming because of the bad name.

another shows the stone brick icon and says stone bricks slab. but then i have another that has the stone brick slab icon and also says stone brick slab. one shows amount as 8 and the other shows 192. stone brick slabs print fine and i'm assuming it's the 192 amount but....yeah....

any ideas? other than those issues this mod is still a massive time saver.

thanks in advance

The material list most likely has quite a few issues with modded items, but vanilla should be (almost) complete now. You might've used the silverfish blocks in the SP world which is why it shows up as Monster Brick Monster Egg.
The slabs are most likely the same issue. 2 half slabs basically turn into a special double slab block and make it hard to work with. I've considered adding mappings for those blocks so that double slabs would be displayed as normal bricks. Though I doubt that I'll be doing that in 1.7, I already have to rewrite a big portion of the stuff and I'll have to rewrite it again in 1.8. I might just hardcode it for 1.7, not much else I can do about it.
The things with doors is, do I ignore the bottom or the upper part? I may or may not be missing doors if only one part of the door was saved. I'm open to suggestions on this one.

Quote from OakleyTheOaktree»

Is there any ETA on the 1.8 release? You mentioned you were "getting close", just wondering how close?

There is a bit of a delay on Forge, the patches are still being ported to 1.8.

Quote from OakleyTheOaktree»

I thought tht fml for 1.8 was already fully released? Or at least in a usable state? some mods have already been released? Or am i no understanding your response?

The problem is that Schematica relies on a lot of Forge stuff. Even with FML for 1.8 out there's very little I can get working right now (maybe GUIs and simple stuff, no rendering).

Quote from ihavemines»

I have an issue I've encountered ever since i switched to my new pc. I've been using this mod for a while now and i would love to have it on this pc too! the game can pop up the GUI when i hit the keys and i can select a zone with the red/blue but whenever i hit save, nothing happens. it doesn't show up in the load schematic screen and if i click ''open schematic folder'' nothing opens. I tried creating the file manually but that didn't work either.

btw im running all my mods for 1.7.2

forge: 1147

lunatrius: 1.0.2.7

schematica: 1.7.0.79

Could you pastebin.com .minecraft/logs/fml-client-latest.log?

Quote from zombiexeffect»

Sorry if someone else asked this but how do I remove the spawned schematic template?

You can hide it on the control GUI.

Quote from ihavemines»

after a quick look in the logs the error seems to be around line 3270 (if that's of any help for you) but im too big of a noob to know how to fix that error xD

http://pastebin.com/5Cm8gAHq

It may be that you don't have permission to write to that folder. Try changing the folder location in the config and see if that fixes the issue.

Quote from adelmeds»

Hey guys, great mod btw, but i wanted to know if there is a forum or site where we could upload/download schematics. Thanks a lot b!!

There's http://www.minecraft-schematics.com/

I was wondering if it would be possible to display the schematic beside the Select a Schematic File?

For instance: