Here is the fix for SEUS v10.1 Ultra water glitch on GTX 970. It probably works on GTX 980, 750, 750 Ti too.
You have to edit 3 files : composite.fsh, composite1.fsh, final.fsh
composite.fsh : Insert these 4 lines in INTERNAL VARIABLES section under compositeFormat.
const int colortex4Format = RGB16;
const int colortex5Format = RGB8;
const int colortex6Format = RGB16;
const int colortex7Format = RGB8;
And add this 1 line under end of INTERNAL VARIABLES section.
/* DRAWBUFFERS:4567 */
composite1.fsh : Insert these 4 lines under the first line.
Can we get an upload of these edited files? x.x I'm a bit of an idiot apparently and did it wrong and now all I have is a black screen with an odd eye shaped brightness in the center of the blackness that eventually fades into looking like the whole screen is covered in thick fog..... Seriously. No joke.
Rollback Post to RevisionRollBack
Check out the best mods ever HERE!
CraftMoreTools and CraftMoreBuildings!
Can we get an upload of these edited files? x.x I'm a bit of an idiot apparently and did it wrong and now all I have is a black screen with an odd eye shaped brightness in the center of the blackness that eventually fades into looking like the whole screen is covered in thick fog..... Seriously. No joke.
Use Notepad++. Copy & paste for accuracy. Did you read the EULA when downloaded?
Can we get an upload of these edited files? x.x I'm a bit of an idiot apparently and did it wrong and now all I have is a black screen with an odd eye shaped brightness in the center of the blackness that eventually fades into looking like the whole screen is covered in thick fog..... Seriously. No joke.
Unless Sonic patches this into 10.2 it is illegal and against his EULA to upload any of his code. We can tell you how to patch it, but not the completed product.
Why am I having black boxes with lb photo realism texture pack?? TIA
1. Did it do this before or after you installed SEUS?
2. What GPU do you have? If you don't know, press WinKey+R then type dxdiag.exe. Under display 1 it will be "Name".
I have an issue (with all 4 variants of SEUS) where user nametags are extremely glitchy and on larger SMP servers, this makes my shaders drive me nuts because of all the flashing visual glitches.
Versions:
-Forge: 1.7.10-Forge10.13.0.1208
-GLSL: ShadersModCore-v2.3.22-mc1.7.10-f1208
-SEUS: SEUS-v10.1-Standard (Ultra, Ultra-DOF, and Ultra-Motion-Blur all have the same issue)
Just letting everyone know that as of 1st of January I will no longer be "showing" everyone how to get their SEUS looking the same way that i have managed to get it looking in this video
this is the ULTRA version BUT I also have a STANDARD and a spiritual 10.1 LITE version since there isnt one yet that looks like this (Picture below) and has the same fps as 10.0 LITE.
If you want this watch this video to find out how to get it
Hi, I have a couple of questions if anyone would be willing to help (please note I'm new to using shaders and any mods at all). I'm running minecraft 1.8 and my server is 1.8.1. How would I go about fixing these issues:
Also, how is it possible to use optifine with this shader pack since they're separate profiles?
I appreciate any help, thank you.
If you scrolled down a bit more on the optifine page, there is an installation guide with Forge.
I already use optifine but I can try to put the graphics to fast.
When I mean fancy to fast, I mean like the default option in minecraft just to clarify. If you still have FPS issues, try changing the render distance to 2 or 4
Wanted to thank you for the best shader pack in my opinion, that being said I have run into an issue, when running your shaderpack I noticed that they were ugly spaces between the waving trees. I am running minecraft version 1.7.10 and did not always encounter this issue. I was updating all my mods to their latest versions and this included shaders. Before I updated this problem didn't occur, after I updated I noticed it so I fiddled around with some settings. After trying with no success I decided to downgrade back to the shaders version I was using before, but that now doesn't work either. Right now I am using the latest version of both the mod, recommended version of forge and latest version of your shaderpack. To be clear the mod works fine, worlds load, minecraft doesn't crash or anything like that, it is just this annoying glitch. I highly doubt my computer is to blame, I have a GTX 780TI and a intel quad core i7, and 16 gigs of ram. I apologize if you have answered this question in the past, or I neglected to read something in the installation guide.
Hi, I have a couple of questions if anyone would be willing to help (please note I'm new to using shaders and any mods at all). I'm running minecraft 1.8 and my server is 1.8.1. How would I go about fixing these issues:
Also, how is it possible to use optifine with this shader pack since they're separate profiles?
I appreciate any help, thank you.
AMD card? There usually is some moiré pattern but yours looks really strong. Try adjusting the AntiAliasing setting in the graphics control panel. Your skin might be due to a 1.8 bug.
Wanted to thank you for the best shader pack in my opinion, that being said I have run into an issue, when running your shaderpack I noticed that they were ugly spaces between the waving trees. I am running minecraft version 1.7.10 and did not always encounter this issue. I was updating all my mods to their latest versions and this included shaders. Before I updated this problem didn't occur, after I updated I noticed it so I fiddled around with some settings. After trying with no success I decided to downgrade back to the shaders version I was using before, but that now doesn't work either. Right now I am using the latest version of both the mod, recommended version of forge and latest version of your shaderpack. To be clear the mod works fine, worlds load, minecraft doesn't crash or anything like that, it is just this annoying glitch. I highly doubt my computer is to blame, I have a GTX 780TI and a intel quad core i7, and 16 gigs of ram. I apologize if you have answered this question in the past, or I neglected to read something in the installation guide.
Don't microscope and it won't bother. Leaves look like full blocks unlike grass. Blocks are intrinsic to MC. That is what a waving block does. Either figure out how to turn it off, reduce the wave or use another Shaderpack.
Can we get an upload of these edited files? x.x I'm a bit of an idiot apparently and did it wrong and now all I have is a black screen with an odd eye shaped brightness in the center of the blackness that eventually fades into looking like the whole screen is covered in thick fog..... Seriously. No joke.
CraftMoreTools and CraftMoreBuildings!
Use Notepad++. Copy & paste for accuracy. Did you read the EULA when downloaded?
Unless Sonic patches this into 10.2 it is illegal and against his EULA to upload any of his code. We can tell you how to patch it, but not the completed product.
--My PC --SEUS 10.1 Fixes --SEUS Water Fix --SEUS 10.2 Preview --MultiMC 1.8 Shaders Fix (Not needed if using Forge)
1. Did it do this before or after you installed SEUS?
2. What GPU do you have? If you don't know, press WinKey+R then type dxdiag.exe. Under display 1 it will be "Name".
--My PC --SEUS 10.1 Fixes --SEUS Water Fix --SEUS 10.2 Preview --MultiMC 1.8 Shaders Fix (Not needed if using Forge)
Not me but most of the people who used Nvidia GTX 900 Above or AMD could have achieved it.
Yes, GTX 770. Obviously in a desktop. I believe SE authored v10.1 with a GTX 760.
edit: nvm
80 FPS with SEUS Ultra, Chroma Hills and 12 Chunk render distance on a 970.
--My PC --SEUS 10.1 Fixes --SEUS Water Fix --SEUS 10.2 Preview --MultiMC 1.8 Shaders Fix (Not needed if using Forge)
Versions:
-Forge: 1.7.10-Forge10.13.0.1208
-GLSL: ShadersModCore-v2.3.22-mc1.7.10-f1208
-SEUS: SEUS-v10.1-Standard (Ultra, Ultra-DOF, and Ultra-Motion-Blur all have the same issue)
Specs:
-Windows 7 (64-bit)
-Intel i7-3770 @3.4GHz
-GTX 770
-16GB RAM
this is the ULTRA version BUT I also have a STANDARD and a spiritual 10.1 LITE version since there isnt one yet that looks like this (Picture below) and has the same fps as 10.0 LITE.
If you want this watch this video to find out how to get it
Get Optifine and use fast instead of fancy. I got like 30-40 frames from doing that
i5-4200U 1.6GHz up to 2.6GHz
Nvidia GT740M 2GB
At A 1336x768 res ?
If you scrolled down a bit more on the optifine page, there is an installation guide with Forge.
When I mean fancy to fast, I mean like the default option in minecraft just to clarify. If you still have FPS issues, try changing the render distance to 2 or 4
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumNot well like a desktop. Try out standard. Use OptiFine Ultra on 1.7.10 or older. Reduce render distance.
AMD card? There usually is some moiré pattern but yours looks really strong. Try adjusting the AntiAliasing setting in the graphics control panel. Your skin might be due to a 1.8 bug.
Don't microscope and it won't bother. Leaves look like full blocks unlike grass. Blocks are intrinsic to MC. That is what a waving block does. Either figure out how to turn it off, reduce the wave or use another Shaderpack.