well I always install optifine, I always install forge then optifine then some other mods, but when i was on a server i was playing a minigame and i couldn't climb the ladder so what i did was i took all my mods out and i added each mod and opened minecraft. once i added optifine i found out that it was it was making me not climb ladders. I dont know whats wrong with it but if u guys can find a why to fix it that will be great since 1.6 is coming out this week you guys can fix it.
I updated optifine to D5, and it fixed the ladder climbing issue. I also installed the latest forge too.
On my config, I had to rollback to Forge v7.8.0.722 in order to be able to use ladder & vines. I really don't know at which release of Forge it broke cause it was the previous version of Forge I was using just before Optifine update ( I was using D3 release).
So...... Forge "MAY" may have some thing to do with this thing after all....
In any case, , switching back Forge solves the problem for me.
Were you able to duplicate this? To confirm, clean (freshly downloaded) copy of Minecraft, OptiFine_1.5.2_HD_U_D5.zip installed first, then minecraftforge-universal-1.5.2-7.8.1.738.zip installed. No other mods. Crash dump below.
...
whenever i try to use optifine on my mac with mountain lion it keeps on freezing and unfreezing
Is AdvancedOpenGL on? A few people (myself included) have found that it and Mountain Lion do not place nice with each other. Not at all. If it is, turn it off before entering the game, and then play normally for about 10 minutes or so before turning it back on.
I'm still not sure whether OS made an update that broke this, or it's on Optifine's side, but it's a known bug all the same.
My Minecraft crashed when I Put my Fog to OFF.
(There was no crash report in the crash logs folder.)
I'm using Forge universal 7.8.1.737, Optifine HD D5, Gulliver 0.13.7, and Some boat mod.
I'm aware that the mod requires forge 738, But I Want to use it along with Gulliver.
I Can deal with the fog, but I'm still confused if this is because Of mod confilct, a bug, or the forge version...
I'd really appreciate a solution to this, Thank you .
If you use magiclauncher click "setup' then check the "Show log" box in the lower left hand corner. Since you are using for, look for the forge log. It's in the .minecraft folder and should be called "forgeModLoader-client-0 or 1 or 2 etc.
Rollback Post to RevisionRollBack
If someone in an S class cuts me off, I don't get upset. He obviously has important things to do. Now, someone in a Toyota? We're fighting.
These forums are dumb and break my links. I'm bubbleawsome on steam too.
sp614x,
Can you PLEASE remove my optifine cape!
I have already asked twice, and I would really like the cape to be removed.
I am not asking for a refund, however I would seriously like my cape removed.
My username is minecraftsat
PLEASE remove my cape
So I made a new 1.5.2 instance on multimc with the Ultra D5 optifine and every 150-300 blocks my world just stops loading all chunks. Only save&close fixes this. Ultra D3 works just fine with my other instance.
I'm seeing similar issues with other mods, only is fixed if Optifine isn't installed, this post refers to the Tekkit 1.1.5 mod, not here to discuss/argue on whether or not its a good pack/the best pack/whatever, I'm just saying I have issues with it only while Optifine is installed. As soon as I remove Optifine(no matter which 1.5.2 version I use) the issues go away. I have tried removing the NEI mod as I sometimes see the NEI item list flicker right as I first check my inventory, but this has not made a difference. I am still seeing the same results, when NEI isn't installed except that I don't get the flicker of the items working anymore, they just go straight to not working. I'm unaware of where else to post bugs & such, and can do so elsewhere if requested(nicely).
Edit: Also before is is requested that I try, I have also updated my Java to 7u25, it is the only version isntalled on my computer, Iuse the 64bit as I have a 64bit OS. I also have tried updating the Forge version to the Highest Recommended build of 7.8.1.737(there may be higher/newer versions but at the time of my testing this was the highest/newest Recommended version).
The mmmPowersuit's tinker table and the hotbar HUD for the PowerGlove have messed up icons. This is apparently due to something with the mod and Optifine's HD Fonts(or something?). To fix it:From another post in this my Sphax thread:
Quote from antisocialian »
So to fix the Optifine issue with the mmmPowersuits icons, you'll need to go into the mmmPowersuits.cfg file in %appdata%\.technic\tekkitmain\config and look for
Use Custom Font Engine
and change that option to false.
Some Blocks/items have weird & odd textures
Here it shows with my texture pack:
And here it shows with the default pack:
This isn't restricted to blocks from the new mods either, here are a few more, I tried to get shots while I had moused over the item as most end up invisible
Unfortunately, these bugs go away when you don't have Optifine installed. My texture pack seems to work for the most part, except that the Computers(Both the normal #764 and the Advanced #764:16384) have a missing texture for the front in NEI and after it has been used once to turn it on. I haven't noticed any other issues beyond that, so this may be the preferred way to use this texture pack if you don't need the other features Optifine has(better chunk loading, AA, zoom in, etc.)
I understand the middle item may not be something from Optifine, but for congurancy I posted teh entire listing I have found from my Tekkit Sphax Patch post here
I seem to be having a little trouble with the latest version of OptiFine HD (OptiFine_1.5.2_HD_U_D5). Normally, I only run two mods, those being "Rei's Minimap" and "Timber!", but I wanted to reinstall OptiFine again, as I had not done so since 1.4.7. However, on installation, I noticed a slight error with the rendering engine. The below picture is with only Forge Modloader and Optifine HD Update D5 installed, in that order.
My (relevant) system specs are as follows:
Operating System: Windows 7 Ultimate x64
CPU: AMD Phenom II x4 955 Black Edition @4026 MHz
GPU: Sapphire Radeon HD 7970 3GB
Any help as to fixing this error would be greatly appreciated, as I'm at a loss.
Excuse me, but I am unable to climb ladders with Optifine installed. I simply sit at the bottom of the ladders, or fall and take no fall damage while against ladders. I believe this is a bug. I have Optifine HD D3 Ultra, and not sure why this is happening. Other mods I have are:
-Shaders (disabled most of the time due to slowness it creates)
-Reis Minimap
-Mccapes
-Not Enough Items
I need some help because I can't do ladder parkour or even climb ladders in my base!
Excuse me, but I am unable to climb ladders with Optifine installed. I simply sit at the bottom of the ladders, or fall and take no fall damage while against ladders. I believe this is a bug. I have Optifine HD D3 Ultra, and not sure why this is happening. Other mods I have are:
-Shaders (disabled most of the time due to slowness it creates)
-Reis Minimap
-Mccapes
-Not Enough Items
I need some help because I can't do ladder parkour or even climb ladders in my base!
I talked to the Devs of ICBM and they said that it's most likely Optifine causing this.
Subscribe to my YouTube Channel
Follow me on Twitter
On my config, I had to rollback to Forge v7.8.0.722 in order to be able to use ladder & vines. I really don't know at which release of Forge it broke cause it was the previous version of Forge I was using just before Optifine update ( I was using D3 release).
So...... Forge "MAY" may have some thing to do with this thing after all....
In any case, , switching back Forge solves the problem for me.
Install Forge first and OptiFine last.
Is AdvancedOpenGL on? A few people (myself included) have found that it and Mountain Lion do not place nice with each other. Not at all. If it is, turn it off before entering the game, and then play normally for about 10 minutes or so before turning it back on.
I'm still not sure whether OS made an update that broke this, or it's on Optifine's side, but it's a known bug all the same.
These forums are dumb and break my links. I'm bubbleawsome on steam too.
Can you PLEASE remove my optifine cape!
I have already asked twice, and I would really like the cape to be removed.
I am not asking for a refund, however I would seriously like my cape removed.
My username is minecraftsat
PLEASE remove my cape
Please take a look here: http://optifine.net/faq.php
I'm seeing similar issues with other mods, only is fixed if Optifine isn't installed, this post refers to the Tekkit 1.1.5 mod, not here to discuss/argue on whether or not its a good pack/the best pack/whatever, I'm just saying I have issues with it only while Optifine is installed. As soon as I remove Optifine(no matter which 1.5.2 version I use) the issues go away. I have tried removing the NEI mod as I sometimes see the NEI item list flicker right as I first check my inventory, but this has not made a difference. I am still seeing the same results, when NEI isn't installed except that I don't get the flicker of the items working anymore, they just go straight to not working. I'm unaware of where else to post bugs & such, and can do so elsewhere if requested(nicely).
Edit: Also before is is requested that I try, I have also updated my Java to 7u25, it is the only version isntalled on my computer, Iuse the 64bit as I have a 64bit OS. I also have tried updating the Forge version to the Highest Recommended build of 7.8.1.737(there may be higher/newer versions but at the time of my testing this was the highest/newest Recommended version).
thismy Sphax thread:And here it shows with the default pack:
This isn't restricted to blocks from the new mods either, here are a few more, I tried to get shots while I had moused over the item as most end up invisible
Unfortunately, these bugs go away when you don't have Optifine installed. My texture pack seems to work for the most part, except that the Computers(Both the normal #764 and the Advanced #764:16384) have a missing texture for the front in NEI and after it has been used once to turn it on. I haven't noticed any other issues beyond that, so this may be the preferred way to use this texture pack if you don't need the other features Optifine has(better chunk loading, AA, zoom in, etc.)
My (relevant) system specs are as follows:
Any help as to fixing this error would be greatly appreciated, as I'm at a loss.
Excuse me, but I am unable to climb ladders with Optifine installed. I simply sit at the bottom of the ladders, or fall and take no fall damage while against ladders. I believe this is a bug. I have Optifine HD D3 Ultra, and not sure why this is happening. Other mods I have are:
-Shaders (disabled most of the time due to slowness it creates)
-Reis Minimap
-Mccapes
-Not Enough Items
I need some help because I can't do ladder parkour or even climb ladders in my base!
***Please quote me when you reply***
UD5 fixes this.
OptiFine is not installed last.