When I type //set 98 it wont work but if I do 43 or anything else it will work
There are multiple id block 98s (damage). Upper right corner (Search function) type cyan+wool. There's a good explanation and with a little thought you can apply it to your blocks.
Lou
oh, and one thing that anybody who tries the rpg can do, is if they have a mod like tale of kingdoms that adds merchants or shopkeepers, is they can spawn them. because you still have to work towards gaining money to buy things.
hello, sry if i write a bit bad english im from germany.
so i have a problem when i want to fly with zombe´s modpack and doing noclip he switch to the fly mode from SPC in noclip that is just a big problem because i need for redstone buildings so offten noclip and SPC fly is just too bad for doing that pls fix that i have version 1.1 for minecraft and installed correct versions of both. too many items is installed too but there is no problem i think because the problem come without TMI.
I have to same problem too, it's rather annoying because the SPC flying can become a pain when trying to get to certain locations.
hello, sry if i write a bit bad english im from germany.
so i have a problem when i want to fly with zombe´s modpack and doing noclip he switch to the fly mode from SPC in noclip that is just a big problem because i need for redstone buildings so offten noclip and SPC fly is just too bad for doing that pls fix that i have version 1.1 for minecraft and installed correct versions of both. too many items is installed too but there is no problem i think because the problem come without TMI.
I have to same problem too, it's rather annoying because the SPC flying can become a pain when trying to get to certain locations.
simo and tanzanite/zombe is aware of this. I hope zombe is coming with a fix soon.
Zombe's noclip mod is running the command "noclip" because it can work on servers, but it also runs this command in singleplayer and with SPC installed SPC's noclip is run and used.
As a temporary fix you can edit the file "minecraft/mods/spccommands/spccommands.properties" and change the line noclip=noclip to for example noclip=noclip2.
This will change the SPC command noclip to noclip2 and then it shouldnt conflict with zombe
Though, you will have the problem that you gonna get the message "command noclip not found" or similar in SPC.
You added an option which disables creepers from exploding. You just made it possible for me to come out of peaceful mode without something being blown up! YES! You deserve diamonds, a medal, a pony, ice cream, and other things I can't think of right now.
mh yes its not so good even i make noclip from zombe alwawys on he turn it alaway by SPC on. the only think that i can do right now is make fly and noclip from zombe on and make noclip from SPC off but i have to do that everytime when i make fly on. just a big problem. i do have this conflict since 3.1 SPC before didnt have.
That's becuase when enableing zombe's noclip the command "noclip" is run. It does this because it can work on multiplayer. However, this command is alro run in Single Player. Normally this wouldn't be a problem but since we have SPC also it makes SPC run the noclip command.
How to remove noclip mod,because its confliting with zombe fly mod an
I do not believe you can do that, but you can open up .minecraft/mods/spccommands/spccommands.properties and change the noclip command to noclip2 or whatever.
I'm not sure but theres an error with the lighting. When you do the /light command nothing lights up but mobs don't spawn anymore. I'm not sure if it's with dynamic lights, but Is anyone else getting this problem?
EDIT: I have found the problem it's MC Patcher if you patch the game you lose the light commands function.
Hey i downloaded it seemed to work when i load my world it says briefly "Single Player Comands 3.1...." like it should be but when i click t nothing happens at all i'm running 1.1 and i have no other mods installed whats going on??
I do not believe you can do that, but you can open up .minecraft/mods/spccommands/spccommands.properties and change the noclip command to noclip2 or whatever.
I have already do that but this turns off Zombes Noclip and i need tio press F6 evry time.
Rollback Post to RevisionRollBack
Hi I'm EduardoTA from Youtube and a lot of othere services around the Web.I live in São Paulo(capital),São paulo(State),Brazil(Country).
Hey i downloaded it seemed to work when i load my world it says briefly "Single Player Comands 3.1...." like it should be but when i click t nothing happens at all i'm running 1.1 and i have no other mods installed whats going on??
I have a question pertaining to the world edit commands:
When I use //set to change the blocks in a specific area for, it doesn't recognize "98" or stone bricks. Is there another way to enter the specific block I need?
I have a question pertaining to the world edit commands:
When I use //set to change the blocks in a specific area for, it doesn't recognize "98" or stone bricks. Is there another way to enter the specific block I need?
I have a question pertaining to the world edit commands:
When I use //set to change the blocks in a specific area for, it doesn't recognize "98" or stone bricks. Is there another way to enter the specific block I need?
To add on to ragger's post, using //set stonebrick allows it to work. One word, no 's'.
I have a question pertaining to the world edit commands:
When I use //set to change the blocks in a specific area for, it doesn't recognize "98" or stone bricks. Is there another way to enter the specific block I need?
1. Why report a WorldEdit (WE) problem in the SPC thread? WorldEdit bug report.
PS this is NOT a bug!!!
2. There are 3 id#98 blocks that use damage to differentiate between them. While I haven't tried, I suspect the :(colon) separation method will work with WE. the method is described
There are multiple id block 98s (damage). Upper right corner (Search function) type cyan+wool. There's a good explanation and with a little thought you can apply it to your blocks.
Lou
here.
A little research makes you smarter and those that answer questions lives MUCH easier. It reduces your down time too!!!
Lou
There are multiple id block 98s (damage). Upper right corner (Search function) type cyan+wool. There's a good explanation and with a little thought you can apply it to your blocks.
Lou
Links to pdf format, downloadable, command lists for (these often clarify/expand descriptions, and where possible link to the author's posting):
MoreCommands: http://www.mediafire.com/view/qjc9c6klcnp660e/CmdLstMoreCommands.pdf
WorldEdit: http://www.mediafire.com/view/bi7r00xd9rgxrrt/WE_Commands.pdf
lol sorry didn't realized the post came out like that.
Thanks :tongue.gif:
I have to same problem too, it's rather annoying because the SPC flying can become a pain when trying to get to certain locations.
simo and tanzanite/zombe is aware of this. I hope zombe is coming with a fix soon.
Zombe's noclip mod is running the command "noclip" because it can work on servers, but it also runs this command in singleplayer and with SPC installed SPC's noclip is run and used.
Though, you will have the problem that you gonna get the message "command noclip not found" or similar in SPC.
"Gotta blast!" ~Spongebob Squarepants
"Use the Force, Kirk!" ~ Ka D'Argo
That's becuase when enableing zombe's noclip the command "noclip" is run. It does this because it can work on multiplayer. However, this command is alro run in Single Player. Normally this wouldn't be a problem but since we have SPC also it makes SPC run the noclip command.
I do not believe you can do that, but you can open up .minecraft/mods/spccommands/spccommands.properties and change the noclip command to noclip2 or whatever.
EDIT: I have found the problem it's MC Patcher if you patch the game you lose the light commands function.
I have already do that but this turns off Zombes Noclip and i need tio press F6 evry time.
There is. The command is xp. Type /help xp in SPC too find out more about it.
When you click what?
That's a bug in zombe's mod where pressing F often does not turn on nocli pif you have that enabled.
When I use //set to change the blocks in a specific area for, it doesn't recognize "98" or stone bricks. Is there another way to enter the specific block I need?
//set 98 works fine for me with WorldEdit 5.1.
1. Why report a WorldEdit (WE) problem in the SPC thread? WorldEdit bug report.
PS this is NOT a bug!!!
2. There are 3 id#98 blocks that use damage to differentiate between them. While I haven't tried, I suspect the :(colon) separation method will work with WE. the method is described
here.
A little research makes you smarter and those that answer questions lives MUCH easier. It reduces your down time too!!!
Lou
Links to pdf format, downloadable, command lists for (these often clarify/expand descriptions, and where possible link to the author's posting):
MoreCommands: http://www.mediafire.com/view/qjc9c6klcnp660e/CmdLstMoreCommands.pdf
WorldEdit: http://www.mediafire.com/view/bi7r00xd9rgxrrt/WE_Commands.pdf