//expand is a WE command and works perfectly on my XP.
I pos 1 & 2 a single block.
Then "//expand 5 n" gives a strip 1 block wide by 6 blocks long. There is an error in WE this strip actually runs to the west.
"//expand 5 5 n" creates a strip 11 by 1 blocks running west to east.
Adding "//expand 5 5 w" creates a 11 by 11 block, centered on my initial selection.
HTH
Lou
i selected the single block like you told me and typed in '//expand 5 5 w' and it said 'region expanded 10 blocks' but it did absolutely nothing. i relogged and still no response so i tried on a bigger scale and it still didn't work. am i still doing something wrong?
Cheers,
Tim
Once selected try "//set 3" in a block of sand.
This macro sets a sand border around the perimeter of my home. I clear down to level 54 build a 9x10 (extra block to East) home, 4 glass blocks high and surround/cover it with water (from level 63 to 54).
This occurs where I stand, I "/up ?" (enough to clear any trees), then run the macro, and remove everything within the sand walls, to level 54.
"macro border"
Border.txt
//pos1
//pos2
//expand 2 u
//expand 31 30 s
//expand 30 30 e
//walls 12
You should be able to //undo (may need to //undo multiple times) and remove all this sand.
I'm having some trouble with the SPC mod. I can get some of the functions to work, but not others. I've tried to turn on noclip but it says it's an invalid command. I tried weather snow and it said that wasn't valid either. I was watching the tutorial videos and so when I would try what they would say to do, some of it wouldn't work. The fly doesn't work either. I followed the install process from the video exactly. Does anyone know what the problem is?
I'm having some trouble with the SPC mod. I can get some of the functions to work, but not others. I've tried to turn on noclip but it says it's an invalid command. I tried weather snow and it said that wasn't valid either. I was watching the tutorial videos and so when I would try what they would say to do, some of it wouldn't work. The fly doesn't work either. I followed the install process from the video exactly. Does anyone know what the problem is?
READ page 1, post 1. If you still have questions READ it again!
I'm really starting to think that this thread should be locked at this point. Simo may or may not update past 1.4.6, the mod has been made open source so anyone else can fork the code, and the same questions are asked over and over again. If the thread were locked, then people would be forced to actually read page 1 and find their answer is (more than likely) there already.
Hundreds, perhaps thousands sign onto MC daily. 1 in 100 actually reads anything! Locking the thread won't solve what you see. A method where we can reach through the monitor and slap some sense/self discipline might. If it ever happens I'll no longer internet!
Lou
Wrong input, eg: exceptions, are handled - though I may have missed something, but I have used it for a week now without problems. Feel free to report any bugs and I'll fix them. You should NEVER see a stack trace from bad input.
ps: You don't need the '/' either - I changed that today before posting. For example: '/give 1' is the same as 'give 1'
Can you add disguise to spc? i want to disguise as mobs and other players
Hundreds, perhaps thousands sign onto MC daily. 1 in 100 actually reads anything! Locking the thread won't solve what you see. A method where we can reach through the monitor and slap some sense/self discipline might. If it ever happens I'll no longer internet!
Lou
LOL! Lou, I meant if the thread is locked for comments, they can't ask the questions anymore Problem solved. They'll either start new threads (which mods can delete) or find their answer here. The third possibility is that they don't find their answer because they aren't intelligent enough to know it's here, but in those cases, they probably aren't intelligent enough to understand the answer even after it's given to them and there's no hope for them anyway
My wand isn't working. Can't make any selections as the position 1/position 2 won't work. I've tried installing and reinstalling through both the manual and automatic installations, and everything works well. Except the wand. I'm running Mac OS X 10.6.8 and have the most up to date Java version. No other mods. All help is greatly appreciated, and thanks for the otherwise AWESOME mod.
My wand isn't working. Can't make any selections as the position 1/position 2 won't work. I've tried installing and reinstalling through both the manual and automatic installations, and everything works well. Except the wand. I'm running Mac OS X 10.6.8 and have the most up to date Java version. No other mods. All help is greatly appreciated, and thanks for the otherwise AWESOME mod.
Macs are different animals. I suspect the WorldEdit.jar isn't where it belongs (see manual installation Page 1).
99.9 times WE not working is caused by this.
Lou
@ DJLittleMike;
I don't want to see the thread locked. I DO want people to READ before posting; but locking any thread won't make it happen! It just makes it more difficult to ask a question/get help.
I hope my barbed replies stimulate a few to get off their lazy bottoms!
Macs are different animals. I suspect the WorldEdit.jar isn't where it belongs (see manual installation Page 1).
99.9 times WE not working is caused by this.
Lou
@ DJLittleMike;
I don't want to see the thread locked. I DO want people to READ before posting; but locking any thread won't make it happen! It just makes it more difficult to ask a question/get help.
I hope my barbed replies stimulate a few to get off their lazy bottoms!
Lou - that's kind of my point. It doesn't make it more difficult to get help - the help is already in this thread. They just need to look for it. I hope they search too, but even I've noticed since subscribing to this thread that people usually don't. I would like to think they will, but I'm still waiting to see that happen.
@ Mike;
They don't look regardless of the thread. Risu's, MagicLauncher, RedPower, etc. They don't look, even my signature doesn't help.
It's much easier to type than to read.
Most are very young and are accustomed to asking Mom and Dad, this is an extension of that behavior.
Raising the minimum age would help but they lie too!
@ Mike;
They don't look regardless of the thread. Risu's, MagicLauncher, RedPower, etc. They don't look, even my signature doesn't help.
It's much easier to type than to read.
Most are very young and are accustomed to asking Mom and Dad, this is an extension of that behavior.
Raising the minimum age would help but they lie too!
I agree they don't look. We've tried to ask, we've tried telling them, neither has worked. If the thread were locked - and mind you I don't mean taken down - just mean comments locked, then they couldn't ask their question in this thread anymore. It would force them to read the thread, create a new thread, or never get their answer. Instead we get questions that have been asked over and over again. And the thread gets bigger and bigger with less and less useful information in it.
I fear they will just ask somewhere else, probably Risu's thread (it already gets more than it's fair share).
Posting without looking/searching is a rules violation but you'll never get a Moderator to nick them for not doing it.
I moderate a different board of mostly adults, it's only slightly better there.
We've forgotten how to read/think. Many here haven't yet learned how IMO.
Lou
We're both way off topic and adding to the BS others must wade through.
I fear they will just ask somewhere else, probably Risu's thread (it already gets more than it's fair share).
Posting without looking/searching is a rules violation but you'll never get a Moderator to nick them for not doing it.
I moderate a different board of mostly adults, it's only slightly better there.
We've forgotten how to read/think. Many here haven't yet learned how IMO.
Lou
We're both way off topic and adding to the BS others must wade through.
True, and one of the possibilities I thought of when I said post a new thread. I guess the question is whether or not locking it would cause more to search or more to post elsewhere/new threads.
Please help me out. I spent all day making a map on a super flat world, using the world edit tools and junk, then I saved it. When I came back to the save, most of my work was gone. Rooms were either cut in half or missing altogether. It has messages saying "Unable to locate sign at [coordinates]" and some of the chunks were completely missing. Most of the rooms were deleted but the ground under it was fine, but some of these chunks were black voids that lagged me when passing through it.
I also find that if I move around, or reload the world save, that different chunks are missing than before, and some rooms appear and disappear, as if they're being deleted on proximity. This is really ing me off as I spent all day on this. I used the 1.4.6 installer.
I also find that if I move around, or reload the world save, that different chunks are missing than before, and some rooms appear and disappear, as if they're being deleted on proximity. This is really ing me off as I spent all day on this. I used the 1.4.6 installer.
this mod has been around forever and gotten a huge amount of credit,so thnx for making it My question i hope gets read threw all the thousands of posts. Ok ,would it be a possibility for you to add warps,like a command to add a warp to a sign. That would be freaking sweet ,thnx again.
Your facebook link isn'T working - I suggest you upload your screen on imageshack or something. Bu that aside your issue doesn'T sound like it's WE/SPC-related. I'm also having the Unable to locate sign issue and suffer short time lags but that actuall started to happen ever since I switched from MC-patcher to Optifine since Forge does not like MCpatcher. Optifine seems to cause a lot of issues of this kind recently.
I sometimes don't see chests I placed but can access them just as if they were invisible. If I quit to title and go back to where I left off they are visible again. I also have chunk issues once in a while but not that excessively. Alos never had issues of my building or rooms missing or anything.
If you are using optifine try deinstalling it and switch to a non HD-texturepack and deactivate everything that relies on OptiFine. Then try again. If the issues with the chunks and missing rooms and stuff still occur that massively...idk...possibly reduce your rendering settings to a minimum - maybe your machine is too slow for High end Renders. I noticed a lot of chunk-holes when I had set every graphic setting to highest available because I thought with 6GB of Ram I'll be fine - but apparently neither my RAM nor my Graphic's Card could take it so I reduced most of them down again and got rid of the chunk-loading issues.
That'S all I can say for now
http://imageshack.us/g/1/9947720/ try this link.
i have no other mods installed,
i do not have a META-INF folder,
i am not using an in-browser version,
and i downloaded version 4.4 to my 1.4.6, which i hear, is correct.
my render distance is on small, and every video option on the lowest setting, but thats not the problem, because these rooms were physically deleted. when i was running minecraft, building it, i was noticing a lot of lag, mostly short, complete stops inbetween moments of it consistantly working. i did notice the wand was not acting like it does on my server; when i select a 1st position, the block breaks and selects the one behind it, where on my server, the broken block is selected, and then replaced. im not sure if this is supposed to be like this but thats how it is
http://imageshack.us/g/1/9947720/ try this link.
i have no other mods installed,
i do not have a META-INF folder,
i am not using an in-browser version,
and i downloaded version 4.4 to my 1.4.6, which i hear, is correct.
my render distance is on small, and every video option on the lowest setting, but thats not the problem, because these rooms were physically deleted. when i was running minecraft, building it, i was noticing a lot of lag, mostly short, complete stops inbetween moments of it consistantly working. i did notice the wand was not acting like it does on my server; when i select a 1st position, the block breaks and selects the one behind it, where on my server, the broken block is selected, and then replaced. im not sure if this is supposed to be like this but thats how it is
Your best bet in troubleshooting this issue is to backup your \.minecraft\saves folder somewhere, load the vanilla client/launcher, do a Force Update and start fresh. See if the issue is still there. If not, then proceed to install SPC manually. Load up the saves and check again.
Your best bet in troubleshooting this issue is to backup your \.minecraft\saves folder somewhere, load the vanilla client/launcher, do a Force Update and start fresh. See if the issue is still there. If not, then proceed to install SPC manually. Load up the saves and check again.
I clicked "back up Minecraft" on the installer, where does that save? And does it matter if I do not give a crap about any of the single player worlds saved?
Once selected try "//set 3" in a block of sand.
This macro sets a sand border around the perimeter of my home. I clear down to level 54 build a 9x10 (extra block to East) home, 4 glass blocks high and surround/cover it with water (from level 63 to 54).
This occurs where I stand, I "/up ?" (enough to clear any trees), then run the macro, and remove everything within the sand walls, to level 54.
"macro border"
Border.txt
//pos2
//expand 2 u
//expand 31 30 s
//expand 30 30 e
//walls 12
You should be able to //undo (may need to //undo multiple times) and remove all this sand.
Links to pdf format, downloadable, command lists for (these often clarify/expand descriptions, and where possible link to the author's posting):
MoreCommands: http://www.mediafire.com/view/qjc9c6klcnp660e/CmdLstMoreCommands.pdf
WorldEdit: http://www.mediafire.com/view/bi7r00xd9rgxrrt/WE_Commands.pdf
READ page 1, post 1. If you still have questions READ it again!
Links to pdf format, downloadable, command lists for (these often clarify/expand descriptions, and where possible link to the author's posting):
MoreCommands: http://www.mediafire.com/view/qjc9c6klcnp660e/CmdLstMoreCommands.pdf
WorldEdit: http://www.mediafire.com/view/bi7r00xd9rgxrrt/WE_Commands.pdf
Lou
Links to pdf format, downloadable, command lists for (these often clarify/expand descriptions, and where possible link to the author's posting):
MoreCommands: http://www.mediafire.com/view/qjc9c6klcnp660e/CmdLstMoreCommands.pdf
WorldEdit: http://www.mediafire.com/view/bi7r00xd9rgxrrt/WE_Commands.pdf
LOL! Lou, I meant if the thread is locked for comments, they can't ask the questions anymore
Macs are different animals. I suspect the WorldEdit.jar isn't where it belongs (see manual installation Page 1).
99.9 times WE not working is caused by this.
Lou
@ DJLittleMike;
I don't want to see the thread locked. I DO want people to READ before posting; but locking any thread won't make it happen! It just makes it more difficult to ask a question/get help.
I hope my barbed replies stimulate a few to get off their lazy bottoms!
Links to pdf format, downloadable, command lists for (these often clarify/expand descriptions, and where possible link to the author's posting):
MoreCommands: http://www.mediafire.com/view/qjc9c6klcnp660e/CmdLstMoreCommands.pdf
WorldEdit: http://www.mediafire.com/view/bi7r00xd9rgxrrt/WE_Commands.pdf
Lou - that's kind of my point. It doesn't make it more difficult to get help - the help is already in this thread. They just need to look for it. I hope they search too, but even I've noticed since subscribing to this thread that people usually don't. I would like to think they will, but I'm still waiting to see that happen.
They don't look regardless of the thread. Risu's, MagicLauncher, RedPower, etc. They don't look, even my signature doesn't help.
It's much easier to type than to read.
Most are very young and are accustomed to asking Mom and Dad, this is an extension of that behavior.
Raising the minimum age would help but they lie too!
Links to pdf format, downloadable, command lists for (these often clarify/expand descriptions, and where possible link to the author's posting):
MoreCommands: http://www.mediafire.com/view/qjc9c6klcnp660e/CmdLstMoreCommands.pdf
WorldEdit: http://www.mediafire.com/view/bi7r00xd9rgxrrt/WE_Commands.pdf
I agree they don't look. We've tried to ask, we've tried telling them, neither has worked. If the thread were locked - and mind you I don't mean taken down - just mean comments locked, then they couldn't ask their question in this thread anymore. It would force them to read the thread, create a new thread, or never get their answer. Instead we get questions that have been asked over and over again. And the thread gets bigger and bigger with less and less useful information in it.
Posting without looking/searching is a rules violation but you'll never get a Moderator to nick them for not doing it.
I moderate a different board of mostly adults, it's only slightly better there.
We've forgotten how to read/think. Many here haven't yet learned how IMO.
Lou
We're both way off topic and adding to the BS others must wade through.
Links to pdf format, downloadable, command lists for (these often clarify/expand descriptions, and where possible link to the author's posting):
MoreCommands: http://www.mediafire.com/view/qjc9c6klcnp660e/CmdLstMoreCommands.pdf
WorldEdit: http://www.mediafire.com/view/bi7r00xd9rgxrrt/WE_Commands.pdf
True, and one of the possibilities I thought of when I said post a new thread. I guess the question is whether or not locking it would cause more to search or more to post elsewhere/new threads.
And true, we're getting off-topic. Carry on!
I also find that if I move around, or reload the world save, that different chunks are missing than before, and some rooms appear and disappear, as if they're being deleted on proximity. This is really ing me off as I spent all day on this. I used the 1.4.6 installer.
www.facebook.com/media/set/?set=a.478671235512186.102273.100001079417347&type=1
Here are some screenshots of the errors im getting.
http://imageshack.us/g/1/9947720/ try this link.
i have no other mods installed,
i do not have a META-INF folder,
i am not using an in-browser version,
and i downloaded version 4.4 to my 1.4.6, which i hear, is correct.
my render distance is on small, and every video option on the lowest setting, but thats not the problem, because these rooms were physically deleted. when i was running minecraft, building it, i was noticing a lot of lag, mostly short, complete stops inbetween moments of it consistantly working. i did notice the wand was not acting like it does on my server; when i select a 1st position, the block breaks and selects the one behind it, where on my server, the broken block is selected, and then replaced. im not sure if this is supposed to be like this but thats how it is
Your best bet in troubleshooting this issue is to backup your \.minecraft\saves folder somewhere, load the vanilla client/launcher, do a Force Update and start fresh. See if the issue is still there. If not, then proceed to install SPC manually. Load up the saves and check again.
I clicked "back up Minecraft" on the installer, where does that save? And does it matter if I do not give a crap about any of the single player worlds saved?