Oh haven't tried making glass yet...kinda generated a new world and all. I hope the glass still looks that great. If not I'm gonna cry because I need the performance enhancing that optifine gives.
Oh haven't tried making glass yet...kinda generated a new world and all. I hope the glass still looks that great. If not I'm gonna cry because I need the performance enhancing that optifine gives.
Yeah, Optifine has a bug right now and it's CTM won't allow multilayered textures, so it'll only load the glass border and not the actual glass :/
Also; Go into your quality settings and make sure Connected Textures is set to Fancy
First, I love this texture pack but I use resis minimap and for some reason the connected textures don't seem to work. I've used mcpatcher but no result. What do you recommend?
Also I'm building an adventure map using your texture pack. Would it be ok to advertise your texture pack with my adventure map, I will link back to this thread so that you get full credit
I don't mind advertising at all, as long as the advertising someway or another leads to an official download link.
When you installed MCPatcher, did you select all the mods in the mod tab? I've seen videos online of people using Rei's minimap, MCPatcher and had connected textures so you may be doing something out of order.
You could try a fresh install, then MCPatcher, then use MCPatcher to install the minimap. I personally don't use the minimap though so I can't say for sure. :/
Okay, so I'm really picky with texturepacks, and so far I have only found one that I really liked. Well, let's make that two! I really love your texturepack, I've been looking for one like this for a while now, and this is it. Keep up the good work!
yeah it does, but what can i do? i need the frame boosting of optifine. unless there is something else that i can use to boost my framerate.
Go yell at the Optifine devs to update CTM to MCPatcher's standards.
Actually you can install MCPatcher *and* Optifine side by side, although I'm not sure on the details. But basically it involves installing MCPatcher, then using it to install Optifine without Optifine's CTM support. Then MCPatcher takes control CTM. But you still get the boost from Optifine.
Someday I'll workout the details and post a step-by-step in the thread.
Go yell at the Optifine devs to update CTM to MCPatcher's standards.
Actually you can install MCPatcher *and* Optifine side by side, although I'm not sure on the details. But basically it involves installing MCPatcher, then using it to install Optifine without Optifine's CTM support. Then MCPatcher takes control CTM. But you still get the boost from Optifine.
Someday I'll workout the details and post a step-by-step in the thread.
This would be awesome, this is my only reservation, details on how to best do this would be greatly appreciated.
I am *loving* this texture pack (even with my currently crap-glass)! I have tested out several vastly more popular packs, and found them lacking. Yours hits the right balance of clean, detailed, and faithful. I was considering making my own until I found this one. I'm very much looking forward to additions/completion. Keep up the great work.
First off, this is a really awesome TP. I'm looking forward to future updates
Ran into a really odd problem. Yesterday, while exploring underground, I stumbled across a Stronghold. Today I wanted, just for fun, to see what the End Portal would look like with other TPs active. So, I went through my TPs, starting with the ChromaHills TP. When I got to yours, everything was blank (I have a screenshot of my Enchanting Room to give you an idea of what's going on, but I have no clue how to upload the image).
It's odd, considering that the pack was working fine the day before. I thought it would have had something to do with the fact that I had an older version of the ChromaHills 64x TP and the new version of the ChromaHills 128x TP. So I deleted both and then downloaded the new ChromaHills 64x TP. After that, your pack worked fine. I switched to another pack for a while, but when I switched back to yours, it went blank on me again. I switched to the default TP, saved and exited out the game, started the game back up, selected your TP, loaded up the game, and it was just fine. I'm not really sure what the problem is.
Again, ifI knew how to post a screen shot to show you, I would. But I don't, so I can't.
First off, this is a really awesome TP. I'm looking forward to future updates
Ran into a really odd problem. Yesterday, while exploring underground, I stumbled across a Stronghold. Today I wanted, just for fun, to see what the End Portal would look like with other TPs active. So, I went through my TPs, starting with the ChromaHills TP. When I got to yours, everything was blank (I have a screenshot of my Enchanting Room to give you an idea of what's going on, but I have no clue how to upload the image).
It's odd, considering that the pack was working fine the day before. I thought it would have had something to do with the fact that I had an older version of the ChromaHills 64x TP and the new version of the ChromaHills 128x TP. So I deleted both and then downloaded the new ChromaHills 64x TP. After that, your pack worked fine. I switched to another pack for a while, but when I switched back to yours, it went blank on me again. I switched to the default TP, saved and exited out the game, started the game back up, selected your TP, loaded up the game, and it was just fine. I'm not really sure what the problem is.
Again, ifI knew how to post a screen shot to show you, I would. But I don't, so I can't.
Upload the sceenshot to imgur.com and just link the image, should work just fine
First off, this is a really awesome TP. I'm looking forward to future updates
Ran into a really odd problem. Yesterday, while exploring underground, I stumbled across a Stronghold. Today I wanted, just for fun, to see what the End Portal would look like with other TPs active. So, I went through my TPs, starting with the ChromaHills TP. When I got to yours, everything was blank (I have a screenshot of my Enchanting Room to give you an idea of what's going on, but I have no clue how to upload the image).
It's odd, considering that the pack was working fine the day before. I thought it would have had something to do with the fact that I had an older version of the ChromaHills 64x TP and the new version of the ChromaHills 128x TP. So I deleted both and then downloaded the new ChromaHills 64x TP. After that, your pack worked fine. I switched to another pack for a while, but when I switched back to yours, it went blank on me again. I switched to the default TP, saved and exited out the game, started the game back up, selected your TP, loaded up the game, and it was just fine. I'm not really sure what the problem is.
Again, ifI knew how to post a screen shot to show you, I would. But I don't, so I can't.
If I'm understanding what you're saying, you're saying the *entire* screen goes blank? If so, it sounds like you're running out of memory. MC is notorious for memory leaks when you swap out texture packs constantly in-game. :/
Nut uh. I bet your glass looks awful.
Should look like this:
Yeah, Optifine has a bug right now and it's CTM won't allow multilayered textures, so it'll only load the glass border and not the actual glass :/
Also; Go into your quality settings and make sure Connected Textures is set to Fancy
I don't mind advertising at all, as long as the advertising someway or another leads to an official download link.
When you installed MCPatcher, did you select all the mods in the mod tab? I've seen videos online of people using Rei's minimap, MCPatcher and had connected textures so you may be doing something out of order.
You could try a fresh install, then MCPatcher, then use MCPatcher to install the minimap. I personally don't use the minimap though so I can't say for sure. :/
Image doesn't have those blocks?
Also, thank you for following my suggestion with the changelog reversing & the progress breakdown
NP, and hit F5/Refresh the browser. I overwrite the old "Utility Block" pic, you might be looking at one in cache.
That was it, love the pistons
Introducing, the 27-Texture Hybrid Random-CTM/Vertical-CTM Sugarcane!
yeah it does, but what can i do? i need the frame boosting of optifine. unless there is something else that i can use to boost my framerate.
Go yell at the Optifine devs to update CTM to MCPatcher's standards.
Actually you can install MCPatcher *and* Optifine side by side, although I'm not sure on the details. But basically it involves installing MCPatcher, then using it to install Optifine without Optifine's CTM support. Then MCPatcher takes control CTM. But you still get the boost from Optifine.
Someday I'll workout the details and post a step-by-step in the thread.
I'm on it!
tell me about it.
This would be awesome, this is my only reservation, details on how to best do this would be greatly appreciated.
I am *loving* this texture pack (even with my currently crap-glass)! I have tested out several vastly more popular packs, and found them lacking. Yours hits the right balance of clean, detailed, and faithful. I was considering making my own until I found this one. I'm very much looking forward to additions/completion. Keep up the great work.
Ran into a really odd problem. Yesterday, while exploring underground, I stumbled across a Stronghold. Today I wanted, just for fun, to see what the End Portal would look like with other TPs active. So, I went through my TPs, starting with the ChromaHills TP. When I got to yours, everything was blank (I have a screenshot of my Enchanting Room to give you an idea of what's going on, but I have no clue how to upload the image).
It's odd, considering that the pack was working fine the day before. I thought it would have had something to do with the fact that I had an older version of the ChromaHills 64x TP and the new version of the ChromaHills 128x TP. So I deleted both and then downloaded the new ChromaHills 64x TP. After that, your pack worked fine. I switched to another pack for a while, but when I switched back to yours, it went blank on me again. I switched to the default TP, saved and exited out the game, started the game back up, selected your TP, loaded up the game, and it was just fine. I'm not really sure what the problem is.
Again, if I knew how to post a screen shot to show you, I would. But I don't, so I can't.
Link RemovedWIP 128x 64x, SEUS support, Mod support in the pipeline TEKKIT, FTB, the more support the more mods!
Upload the sceenshot to imgur.com and just link the image, should work just fine
If I'm understanding what you're saying, you're saying the *entire* screen goes blank? If so, it sounds like you're running out of memory. MC is notorious for memory leaks when you swap out texture packs constantly in-game. :/