Just about everything. You have an up-facing collapsible block, and a non-slab Carpenter's Block. You can chisel one pattern, but the pattern chooser is bugged so that's it. I'm currently working on porting the pressure plate to get whatever systems in place that will be needed for the remainder of the blocks.
That is great news! I'm dying here playing a 1.10.2 without Carpenters Blocks!
Under Language in menu , try Forcing Unicode Font OFF . Tinkers Construct 2 may be using a font that's not installed on your system . It may also fall back to an undesired one
Yep ive tried that too. Still the same huge font spacing with optifine installed. BTW unicode is forced off by default. Here it is with Unicode on.
Here is an image. The bottom section shows blue vertical lines showing the progression of alignment mismatch.
I've also attached it to this post and here is a direct link on imgur so you can see it full sized better: http://i.imgur.com/MLcuGkj.png
So again, is there a way to disable the HD font feature of Optifine?
I have a question about the custom font spacing used with Optifine. I am using OptiFine_1.10.2_HD_U_D7 (with MC 1.10.2 of course).
There is an issue with Tinkers Construct 2 where the text in the starter book runs off the page with optifine installed. I have tried disabling custom fonts and using default texture pack but to no avail.
It appears to be how the characters are spaced compared to vanilla minecraft. Is it possible to force default text width and spacing?
So Ethoslab released a video using the same mechanic (endermite bait) and he has the same issue. I have seen people use this design before and i've never seen that effect, so at least it isn't just me.
starts at 34m 33s if the video does not link correctly.
I am having an issue where once I kill a bunch of enderman the game slows to a crawl then gradually recovers. I first seen this behavior in 1.9.4 when I built the farm and now in 1.10 it still occurs.
The farm design is the same by Docm77 shown here:
I have made a video of the issue, at 1:45 it starts really slowing down quickly dropping to 1fps for a while then recovering to normal: -video removed-
Anybody know what causes this? I thought it was the enderman AI but even once they are at the mob cap it is still lagged. Then I thought it was the enderpearls. However I have another video of the issue recorded that has far, far more pearls lying on the ground. Meaning it happens regardless of the number of pearls.
This results in ores with transparent background that when placed act as an xray block. In my case it seems to be UBfied iron ore that does it, but not all variants.
It is dropping as 15:1 which is the ore texture with transparent stone parts. Using any pickaxe seems to cause it. I first tried it with a vanilla iron pick and then used a diamond pick when I was trying to troubleshoot the issue.
I am using Forge 10.13.4.1558 and UBC 1.7.2-07 in MC version 1.7.10
Anybody have a clue to what is going on here and/or how to fix it?
Redid the modpack (removed a lot of mods). It is some sort of conflict it seems. With what, I have no idea. The only thing i came across in the configs is maybe Railcraft was set to generate iron ore. I cannot be sure though as I deleted everything and started from scratch. I have been troubleshooting this issue for over 8 hours and just gave up. Lesser of a modpack but at least it works with UBC now.
0
Are there any plans to fix this issue?
1
That is great news! I'm dying here playing a 1.10.2 without Carpenters Blocks!
0
Did you try what it says in those threads? Remove fastcraft.
0
No change. This just toggles the texture pack fonts to default HD optifine fonts (ie, does nothing since i dont use anything with custom fonts).
0
Yep ive tried that too. Still the same huge font spacing with optifine installed. BTW unicode is forced off by default. Here it is with Unicode on.
Here is an image. The bottom section shows blue vertical lines showing the progression of alignment mismatch.
I've also attached it to this post and here is a direct link on imgur so you can see it full sized better: http://i.imgur.com/MLcuGkj.png
So again, is there a way to disable the HD font feature of Optifine?
0
I have a question about the custom font spacing used with Optifine. I am using OptiFine_1.10.2_HD_U_D7 (with MC 1.10.2 of course).
There is an issue with Tinkers Construct 2 where the text in the starter book runs off the page with optifine installed. I have tried disabling custom fonts and using default texture pack but to no avail.
It appears to be how the characters are spaced compared to vanilla minecraft. Is it possible to force default text width and spacing?
ed: Forge 1.10.2-12.18.3.2254
0
Thank you for this outstanding mod! I very much appreciate your efforts updating this for 1.10.2.
I have been holding off on playing my 1.10.2 single player "vanilla enhancement" pack until this is was updated.
Again thank you very much for your work!
0
Thanks!
0
Asus Strix GTX 970 driver ver. 368.39 (latest as of June 7, 2016).
2
Getting a missing texture thing in Minecraft 1.10.2 with OptiFine 1.10.2 HD U C2. That is flowing lava if it isn't obvious.
No mods (other than Optifine), vanilla texture pack.
0
Thanks for the help guys.
0
So Ethoslab released a video using the same mechanic (endermite bait) and he has the same issue. I have seen people use this design before and i've never seen that effect, so at least it isn't just me.
starts at 34m 33s if the video does not link correctly.
This has no effect.
0
So it is just the XP? The game recovers once I stop killing them for a while and I never pick up any of the pearls.
1
This is single player local world.
I am having an issue where once I kill a bunch of enderman the game slows to a crawl then gradually recovers. I first seen this behavior in 1.9.4 when I built the farm and now in 1.10 it still occurs.
The farm design is the same by Docm77 shown here:
I have made a video of the issue, at 1:45 it starts really slowing down quickly dropping to 1fps for a while then recovering to normal: -video removed-
Anybody know what causes this? I thought it was the enderman AI but even once they are at the mob cap it is still lagged. Then I thought it was the enderpearls. However I have another video of the issue recorded that has far, far more pearls lying on the ground. Meaning it happens regardless of the number of pearls.
My system:
I7 4790k
GTX 970
16GB DDR3 1800 RAM
500GB OCZ Trion 150
Asus z97-e
Windows 10 x64
0
So a while back somebody posted about ores dropping with odd metadata values as seen here: http://www.minecraftforum.net/forums/mapping-and-modding/minecraft-mods/1293503-underground-biomes-constructs?comment=940
This results in ores with transparent background that when placed act as an xray block. In my case it seems to be UBfied iron ore that does it, but not all variants.
It is dropping as 15:1 which is the ore texture with transparent stone parts. Using any pickaxe seems to cause it. I first tried it with a vanilla iron pick and then used a diamond pick when I was trying to troubleshoot the issue.
I am using Forge 10.13.4.1558 and UBC 1.7.2-07 in MC version 1.7.10
Anybody have a clue to what is going on here and/or how to fix it?
Redid the modpack (removed a lot of mods). It is some sort of conflict it seems. With what, I have no idea. The only thing i came across in the configs is maybe Railcraft was set to generate iron ore. I cannot be sure though as I deleted everything and started from scratch. I have been troubleshooting this issue for over 8 hours and just gave up. Lesser of a modpack but at least it works with UBC now.