The Meaning of Life, the Universe, and Everything.
Join Date:
1/25/2016
Posts:
59
Minecraft:
303gundam
Member Details
When you execute the command /summon EnderDragon in any version after 1.8.9, it summons a FROZEN and INVINCIBLE Ender Dragon!!! Anybody know how to fix this? I'm pretty sure a lot of people would enjoy a regular moving and defeat-able dragon. Thanks!
This has o do with the new Dragon fight, and it being tied to it's new 'arena' in the End. If summoned outside of the End, the Dragon simply doesn't work because it's AI needs that arena.
I heard the AI being kinda screwy, but it doesn't absolutely need it.
This is actually an intended feature, where they literally made it that Ender dragons won't move when /summoned. This was achieved by a new data tag for Ender Dragons, dubbed ' DragonPhase '. Basically, every Ender Dragon summoned without this tag being changed will default to 10, which is your typical hovering, immortal dragon that you just got.
To undo this, you need to change it to a different value, such as 0, which is it doing it's normal flying.
' /summon EnderDragon ~ ~1 ~ {DragonPhase:0} '
According to the wiki, here's all the phase numbers and what they do.
Valid values are:
0=circling,
1=strafing (preparing to shoot a fireball),
2=flying to the portal to land (part of transition to landed state),
3=landing on the portal (part of transition to landed state),
4=taking off from the portal (part of transition out of landed state),
5=landed, performing breath attack,
6=landed, looking for a player for breath attack,
7=landed, roar before beginning breath attack,
8=charging player,
9=flying to portal to die,
10=hovering.
In 1.9.2 the Dragon Phase stuff doesn't seem to work. I could summon a normal EnderDragon using it in 1.7.10 but even in the End you just get the stationary, invincible version in 1.9.2
In 1.9.2 the Dragon Phase stuff doesn't seem to work. I could summon a normal EnderDragon using it in 1.7.10 but even in the End you just get the stationary, invincible version in 1.9.2
It is because the Ender Dragon has so much AI phases making it more complex, the /summon command is summoning all entities in it's default phases, behaviours, etc...
Try using what DrWeegee stated, it might help you. I did'nt test it out yet but I think you can summon a moving dragon but is still invinvible.
Rollback Post to RevisionRollBack
I have returned after all these years and I'm internally dying inside whenever I think about the posts I've done prior to this current year. Just don't look at them.
In 1.9.2 if you want a new normal EnderDragon the only method seams to be putting Ender Crytals on the End Portal. That re-sets the ender crytals on the towers of Obsidian and turns off the portal as well as spawning an EnderDragon. If you find yourself stuck at The End that's no use unless you have either ender crytal ingredients for enough crystals or access to creative.
In 1.9.2 if you want a new normal EnderDragon the only method seams to be putting Ender Crytals on the End Portal. That re-sets the ender crytals on the towers of Obsidian and turns off the portal as well as spawning an EnderDragon. If you find yourself stuck at The End that's no use unless you have either ender crytal ingredients for enough crystals or access to creative.
People truly 'stuck at The End' are stuck because they mistakenly deleted their DIM-1 folder thinking that would reset the End and they could fight the dragon again. However the game tracks whether the dragon has been slain separately and so even though the dimension is regenerated, the dragon is not and they no longer have an end portal to re-summon the dragon with.
If you have already slain the dragon in a world prior to 1.9 being released and you do still have your old end dimension with a portal, then you need to gather the ingredients to make crystals to re-summon the dragon. If you don't want to do that you're not really stuck.
People truly 'stuck at The End' are stuck because they mistakenly deleted their DIM-1 folder thinking that would reset the End and they could fight the dragon again. However the game tracks whether the dragon has been slain separately and so even though the dimension is regenerated, the dragon is not and they no longer have an end portal to re-summon the dragon with.
If you have already slain the dragon in a world prior to 1.9 being released and you do still have your old end dimension with a portal, then you need to gather the ingredients to make crystals to re-summon the dragon. If you don't want to do that you're not really stuck.
Aaaaand... to add something, careful though, when you are regenerating the End which is prior to the 1.9 update, the former end portal which leads you back to the overworld will become end stone, and new pillars will spawn surrounding the new end portal, the former pillars don't despawn or relocate, it will just stay in place and because of that, there will be many obsidian plillars. (I've seen these myself so that things are real)
Rollback Post to RevisionRollBack
I have returned after all these years and I'm internally dying inside whenever I think about the posts I've done prior to this current year. Just don't look at them.
That works but i still need to be in the end. It says "cannot summon object out of the world"
You are trying to summon it in chunks you have not loaded. Go to the position/co-ordinates you want to summon it at first, then try again.
That or you're trying to summon it inside the void or above the block limit
In 1.9.2 the Dragon Phase stuff doesn't seem to work. I could summon a normal EnderDragon using it in 1.7.10 but even in the End you just get the stationary, invincible version in 1.9.2
The dragon phase does actually work. However, the dragon still need to be in The End for it to work otherwise the dragon wont spawn.
When you execute the command /summon EnderDragon in any version after 1.8.9, it summons a FROZEN and INVINCIBLE Ender Dragon!!! Anybody know how to fix this? I'm pretty sure a lot of people would enjoy a regular moving and defeat-able dragon. Thanks!
I heard the AI being kinda screwy, but it doesn't absolutely need it.
This is actually an intended feature, where they literally made it that Ender dragons won't move when /summoned. This was achieved by a new data tag for Ender Dragons, dubbed ' DragonPhase '. Basically, every Ender Dragon summoned without this tag being changed will default to 10, which is your typical hovering, immortal dragon that you just got.
To undo this, you need to change it to a different value, such as 0, which is it doing it's normal flying.
' /summon EnderDragon ~ ~1 ~ {DragonPhase:0} '
According to the wiki, here's all the phase numbers and what they do.
Good show m8
In 1.9.2 the Dragon Phase stuff doesn't seem to work. I could summon a normal EnderDragon using it in 1.7.10 but even in the End you just get the stationary, invincible version in 1.9.2
It is because the Ender Dragon has so much AI phases making it more complex, the /summon command is summoning all entities in it's default phases, behaviours, etc...
Try using what DrWeegee stated, it might help you. I did'nt test it out yet but I think you can summon a moving dragon but is still invinvible.
I have returned after all these years and I'm internally dying inside whenever I think about the posts I've done prior to this current year. Just don't look at them.
Minecraft is forever eternal...
In 1.9.2 if you want a new normal EnderDragon the only method seams to be putting Ender Crytals on the End Portal. That re-sets the ender crytals on the towers of Obsidian and turns off the portal as well as spawning an EnderDragon. If you find yourself stuck at The End that's no use unless you have either ender crytal ingredients for enough crystals or access to creative.
People truly 'stuck at The End' are stuck because they mistakenly deleted their DIM-1 folder thinking that would reset the End and they could fight the dragon again. However the game tracks whether the dragon has been slain separately and so even though the dimension is regenerated, the dragon is not and they no longer have an end portal to re-summon the dragon with.
If you have already slain the dragon in a world prior to 1.9 being released and you do still have your old end dimension with a portal, then you need to gather the ingredients to make crystals to re-summon the dragon. If you don't want to do that you're not really stuck.
by c0yote
I tried it with terrible results. I gave my wife my glasses for a second, a creeper showed up and now my wife is pregnant.
Stupid 3D..
Aaaaand... to add something, careful though, when you are regenerating the End which is prior to the 1.9 update, the former end portal which leads you back to the overworld will become end stone, and new pillars will spawn surrounding the new end portal, the former pillars don't despawn or relocate, it will just stay in place and because of that, there will be many obsidian plillars. (I've seen these myself so that things are real)
I have returned after all these years and I'm internally dying inside whenever I think about the posts I've done prior to this current year. Just don't look at them.
Minecraft is forever eternal...
That works but i still need to be in the end. It says "cannot summon object out of the world"
You are trying to summon it in chunks you have not loaded. Go to the position/co-ordinates you want to summon it at first, then try again.
That or you're trying to summon it inside the void or above the block limit
The dragon phase does actually work. However, the dragon still need to be in The End for it to work otherwise the dragon wont spawn.
Thanks