Whenever I close my game and then relaunch it while I have the XRay mod, the mod's controls are all reset. Not a crash. Any ideas?
Hmmm. Are you relaunching the game immediately back into the XRay mod profile? What could be happening is that when you launch the game into a non-xray profile, it overwrites the options. And because Minecraft doesn't have the XRay keybindings loaded, it doesn't keep the xray keybindings. Then, when you launch back into the XRay mod profile, it loads the keybindings using the defaults. Make sense? I'll see about a fix. Perhaps I'll save the XRay keybindings with the XRay configuration so they're persistent across restarts.
Is there a reason why i cant choose to show me Prismarine Blocks?
The reason for this is due to the change in how the block list works. When you enable XRay, it starts filtering all blocks that are going to be rendered. If it is going to render a block that it hasn't seen before, it adds it to the block list. However, if you haven't come across Prismarine blocks yet, XRay would have never seen them, and thus, they wouldn't be on the block list.
Fortunately, by default, XRay renders all blocks it finds except some on a built in blacklist. So by default, XRay show you all the prismarine blocks.
Is there anyway to change the settings for which blocks you can see? Like you wanted to see iron blocks, which isn't on the default list, is there a way to make it appear?
You can change which blocks are rendered when XRay is enabled by opening the user interface by pressing the keybinding assigned to it. By default, it is J. I described above how this block list works. However, Iron Blocks should be rendered by default - unless it's a third party mod with the same name...
Here's version 17. I reworked fly in this one in an attempt to appease everyone
So first, there is no longer an option in the user interface to enable fly. There is a keybinding you have to set, which by default is set to NONE, which is equivalent to having fly disabled.
Pressing the Fly keybinding enables fly. This disables fall damage and lets you double jump to start flying - just like creative mode.
Double tapping the fly key turns fly on immediately. i.e. you'll start hovering. Pressing it again will turn fly off.
Download here. Let me know what you guys think, and report bugs as soon as you find them!
Please for the love of god bring back pressing the fly key once to enable flying ! It's so annoying now x) I know you changed this around a lot but please, add this feature back in and i'm pretty sure you'll please everyone (myself included)
Did you remove the right-click menu feature in the GUI in the new version? I can select multiple blocks via the Ctrl key in the GUI, but not right-click enable/disable selected. I am forced to select/deselect my blocks individually.
Also X-Ray seems to have made several copies of some of the blocks in its GUI. Not sure why, the previous version didn't list my blocks this way.
Please for the love of god bring back pressing the fly key once to enable flying ! It's so annoying now x) I know you changed this around a lot but please, add this feature back in and i'm pretty sure you'll please everyone (myself included)
You can double tap the fly key to enable flying. A lot of people also wanted to be able to enable fly, but not actually fly, so they don't receive fall damage. Is double tapping it really that much of an inconvenience?
Did you remove the right-click menu feature in the GUI in the new version? I can select multiple blocks via the Ctrl key in the GUI, but not right-click enable/disable selected. I am forced to select/deselect my blocks individually.
Also X-Ray seems to have made several copies of some of the blocks in its GUI. Not sure why, the previous version didn't list my blocks this way.
1. Yeah the right-click menu was removed in the new version (accidentally - I forget to add it back when I was overhauling the user interface). I'll add it back in the next release. Sorry for the inconvenience.
2. Are you using third party mods? It's possible that if a mod has a block named "Iron Ore" that it will be listed twice in the user interface - one for Minecraft's Iron Ore and one for the mod. However, this is very confusing as there is no way to differentiate them, so i'll addressing this also in the next release as well.
Never mind - didn't look at your picture. That is definitely a "bug". I'll fix it.
Did you remove the right-click menu feature in the GUI in the new version? I can select multiple blocks via the Ctrl key in the GUI, but not right-click enable/disable selected. I am forced to select/deselect my blocks individually.
Also X-Ray seems to have made several copies of some of the blocks in its GUI. Not sure why, the previous version didn't list my blocks this way.
Which mod(s) are you using?
Rollback Post to RevisionRollBack
Check out my XRay mod!
Forge compatible, configurable, and easily installable.
Click here for more information.
what forge version should I use? what is this mod compatible with? i played it with optifine and xaero's minimap and the keybinds don't work and there are some "missing textures"
UPDATE: i tried using it only in forge, didnt work. i tried deleting the xray file and relaunching and its still not working. is this only windows? try making one for mac? and i tried using it with optifine only by double clicking it, didnt work also just displays coords the keybinds don't work and the occasional missing textures.
UPDATE UPDATE: I TRIED VANILLA WITH THAT ONLY AND THE KEYBINDS DON'T WORK THIS IS PISSING ME OFF IS IT EVEN MAC COMPATIBLE STATE IT IN YOUR POST I LOST 1 HOUR TRYING TO MAKE THIS WORK
I'm sorry just really pissed
3RD UPDATE: I tried windows. the keybinds still didnt work. dufaq is dis
You can double tap the fly key to enable flying. A lot of people also wanted to be able to enable fly, but not actually fly, so they don't receive fall damage. Is double tapping it really that much of an inconvenience?
I am sorry but it kinda is, and given the fact that you already did it in the past, adding something liike a "useSinglePressToFly": true, as an option in the config would be perfect. Also even more annoying is that i actually did try to get used to it the way it is now, but the fact that you double tap to enable flying, but just single tap to disable it is even more confusing. For the time being i'll stick back to v15 but i really hope you'll add this back in a future update...
Using version 20 with MC 1.7.10 and Forge 1614, I don't seem to have any blocks loading into the block list and as a result, xray does not make anything invisible.
I'll test with just xray installed when I get the time but other mods I have are Optifine, Flan's Mod, Inventory Tweaks, TabbyChat, NEI, JourneyMap and FastCraft.
Using version 20 with MC 1.7.10 and Forge 1614, I don't seem to have any blocks loading into the block list and as a result, xray does not make anything invisible.
I'll test with just xray installed when I get the time but other mods I have are Optifine, Flan's Mod, Inventory Tweaks, TabbyChat, NEI, JourneyMap and FastCraft.
You are pressing the X key (or what ever keybinding you have assigned to XRay), right?
XRay loads blocks into the block list as they are seen while XRay is running. So, no blocks will be loaded until you turn XRay on.
Rollback Post to RevisionRollBack
Check out my XRay mod!
Forge compatible, configurable, and easily installable.
Click here for more information.
Hey I'm sorry but I can't seem to get the x-ray mod to work in 1.9.4 none of the hotkeys are working for it. Apparently press X to use it? It isn't working for me. Neither is fly or redstone finder or anything. The fps counter and coordinates thing are in the top left just like normal but the keys aren't working. Thank you.
Hey I'm sorry but I can't seem to get the x-ray mod to work in 1.9.4 none of the hotkeys are working for it. Apparently press X to use it? It isn't working for me. Neither is fly or redstone finder or anything. The fps counter and coordinates thing are in the top left just like normal but the keys aren't working. Thank you.
Hmmm. Are you relaunching the game immediately back into the XRay mod profile? What could be happening is that when you launch the game into a non-xray profile, it overwrites the options. And because Minecraft doesn't have the XRay keybindings loaded, it doesn't keep the xray keybindings. Then, when you launch back into the XRay mod profile, it loads the keybindings using the defaults. Make sense? I'll see about a fix. Perhaps I'll save the XRay keybindings with the XRay configuration so they're persistent across restarts.
Edit: I believe I have fixed this in version 20.
The reason for this is due to the change in how the block list works. When you enable XRay, it starts filtering all blocks that are going to be rendered. If it is going to render a block that it hasn't seen before, it adds it to the block list. However, if you haven't come across Prismarine blocks yet, XRay would have never seen them, and thus, they wouldn't be on the block list.
Fortunately, by default, XRay renders all blocks it finds except some on a built in blacklist. So by default, XRay show you all the prismarine blocks.
Hope that all makes sense.
You can change which blocks are rendered when XRay is enabled by opening the user interface by pressing the keybinding assigned to it. By default, it is J. I described above how this block list works. However, Iron Blocks should be rendered by default - unless it's a third party mod with the same name...
Forge compatible, configurable, and easily installable.
Click here for more information.
It should do this by default.
Forge compatible, configurable, and easily installable.
Click here for more information.
I've released version 20. Download on the main post.
Changelog:
- redecorated user interface
- keybindings are now saved in the xray config
- minor code improvements
Forge compatible, configurable, and easily installable.
Click here for more information.
Please for the love of god bring back pressing the fly key once to enable flying ! It's so annoying now x) I know you changed this around a lot but please, add this feature back in and i'm pretty sure you'll please everyone (myself included)
Hello, is there a way to remove the xray text in the main menu? I'm trying to not get caught using it, and i would very much like to remove it.
Did you remove the right-click menu feature in the GUI in the new version? I can select multiple blocks via the Ctrl key in the GUI, but not right-click enable/disable selected. I am forced to select/deselect my blocks individually.
Also X-Ray seems to have made several copies of some of the blocks in its GUI. Not sure why, the previous version didn't list my blocks this way.
You can double tap the fly key to enable flying. A lot of people also wanted to be able to enable fly, but not actually fly, so they don't receive fall damage. Is double tapping it really that much of an inconvenience?
Hmm. Currently, no. But perhaps i'll add an option in the future.
1. Yeah the right-click menu was removed in the new version (accidentally - I forget to add it back when I was overhauling the user interface). I'll add it back in the next release. Sorry for the inconvenience.
2.
Are you using third party mods? It's possible that if a mod has a block named "Iron Ore" that it will be listed twice in the user interface - one for Minecraft's Iron Ore and one for the mod. However, this is very confusing as there is no way to differentiate them, so i'll addressing this also in the next release as well.Never mind - didn't look at your picture. That is definitely a "bug". I'll fix it.
Forge compatible, configurable, and easily installable.
Click here for more information.
Which mod(s) are you using?
Forge compatible, configurable, and easily installable.
Click here for more information.
what forge version should I use? what is this mod compatible with? i played it with optifine and xaero's minimap and the keybinds don't work and there are some "missing textures"
UPDATE: i tried using it only in forge, didnt work. i tried deleting the xray file and relaunching and its still not working. is this only windows? try making one for mac? and i tried using it with optifine only by double clicking it, didnt work also just displays coords the keybinds don't work and the occasional missing textures.
UPDATE UPDATE: I TRIED VANILLA WITH THAT ONLY AND THE KEYBINDS DON'T WORK THIS IS PISSING ME OFF IS IT EVEN MAC COMPATIBLE STATE IT IN YOUR POST I LOST 1 HOUR TRYING TO MAKE THIS WORK
I'm sorry just really pissed
3RD UPDATE: I tried windows. the keybinds still didnt work. dufaq is dis
I am sorry but it kinda is, and given the fact that you already did it in the past, adding something liike a "useSinglePressToFly": true, as an option in the config would be perfect. Also even more annoying is that i actually did try to get used to it the way it is now, but the fact that you double tap to enable flying, but just single tap to disable it is even more confusing. For the time being i'll stick back to v15 but i really hope you'll add this back in a future update...
I just gotta say, thank you so much. I've used your mod for so long. They are super easy to install and use.
Thanks for all the hard work you do
Using version 20 with MC 1.7.10 and Forge 1614, I don't seem to have any blocks loading into the block list and as a result, xray does not make anything invisible.
I'll test with just xray installed when I get the time but other mods I have are Optifine, Flan's Mod, Inventory Tweaks, TabbyChat, NEI, JourneyMap and FastCraft.
You are pressing the X key (or what ever keybinding you have assigned to XRay), right?
XRay loads blocks into the block list as they are seen while XRay is running. So, no blocks will be loaded until you turn XRay on.
Forge compatible, configurable, and easily installable.
Click here for more information.
DOES THIS WORK WITH 1.9.4!? DOESN'T SEEM TO. THE KEYBINDS ARE BROKEN IN 1.9.4
YES - IT SHOULD WORK WITH 1.9.4 JUST FINE. COULD YOU DESCRIBE HOW THE KEYBINDS ARE BROKEN? AND POSSIBLE ATTACH A GAME OUTPUT LOG?
Forge compatible, configurable, and easily installable.
Click here for more information.
Hey I'm sorry but I can't seem to get the x-ray mod to work in 1.9.4 none of the hotkeys are working for it. Apparently press X to use it? It isn't working for me. Neither is fly or redstone finder or anything. The fps counter and coordinates thing are in the top left just like normal but the keys aren't working. Thank you.
Vanilla, Forge, or LiteLoader?
Edit: and any other mods?
Forge compatible, configurable, and easily installable.
Click here for more information.
Why XRays not see blocks beneath me.
Singleplayer or multiplayer? What version of Minecraft? What version of XRay? Vanilla, Forge, or LiteLoader?
Forge compatible, configurable, and easily installable.
Click here for more information.
How do you import it to the 1.9.4 launcher?