1.6.4 1.7.10

Tinkers Construct

  • #3739
    Time for a mod-nob question ;)

    Using dev12.

    I cannot craft a pickaxe of metal (Bronze in this case)
    I have crafted with stone without a problem.
    I have created casts and managed to get all needed parts.
    But when I place them in the tool station nothing happens, I tried both the tire 1 and tire 2 stations.

    Known bug I guess or have I missed something (again)?
    Last edited by MoonCutter2B: 7/7/2013 4:52:43 AM
    A.k.a Lionpaw52
  • #3740
    Quote from MoonCutter2B

    Time for a mod-nob question ;)

    Using dev12.

    I cannot craft a pickaxe of metal (Bronze in this case)
    I have crafted with stone without a problem.
    I have created casts and managed to get all needed parts.
    But when I place them in the tool station nothing happens, I tried both the tire 1 and tire 2 stations.

    Known bug I guess or have I missed something (again)?


    Did you smelt the bronze?
  • #3741
    Quote from ZeroKaiser

    Did you smelt the bronze?

    Yes, I have all three needed parts made of bronze, made using the casts and the smelter etc.
    A.k.a Lionpaw52
  • #3742
    I can't seem to make a pick axe head... Am I just maybe doing something stupid?
  • #3743
    Quote from MoonCutter2B

    Yes, I have all three needed parts made of bronze, made using the casts and the smelter etc.


    Then a screenshot is in order!

    Quote from BluntedEdgeBlade

    I can't seem to make a pick axe head... Am I just maybe doing something stupid?


    Are you trying to make it out of metal?
  • #3744
    Hexxit / smeltery: Problem: gold stays liquid on casting table....

    I cant get out the blank cast.

    But I figured out the problem:
    I put a gold ingot into the smeltery controller, because I did not had a gold ore at the momemt....
    But it stayed liquid.....
    So you need to put a gold ore into the controller, to get it hardened....
    Hope this helps other players....
  • #3745
    Quote from Diablino

    Hexxit / smeltery: Problem: gold stays liquid on casting table....

    I cant get out the blank cast.

    But I figured out the problem:
    I put a gold ingot into the smeltery controller, because I did not had a gold ore at the momemt....
    But it stayed liquid.....
    So you need to put a gold ore into the controller, to get it hardened....
    Hope this helps other players....


    In the current stable version at least, it requires two ingots worth of gold to make a cast whereas it only requires one ingot of aluminum brass. Smelting down a single gold ingot will give you only a single ingots worth of molten gold: not enough to make a cast. On the other hand, since the output of raw ores are doubled, a single block of gold ore will give you two ingots worth of molten gold: enough to make a single cast. You just need to make sure you are using enough gold either way; I don't think there is any difference between using gold ore and ingots (just make sure you use 2 ingots to get the required amount for a single cast).
  • #3746
    Quote from mDiyo
    m2pt5: The Cleaver should be dropping player heads 100% of the time when you kill someone.


    Odd, it's not working for me. Does keepInventory stop it from happening?
  • #3747
    Awesome mod! I also love the SimpleOres mod! The two mods could cooperate for max awesomeness!!
  • #3748
    Mdiyo I think that you should add an item called seared piping which should have the seared tanks texture turned on its side and should be 16 pixels long and 8x8 pixels wide placed in the middle of the block area sort of like energy conduits from thermal expansion it should be crafted like a seared drain but with seared glass panes in replace of the empty crafting spots to get 8 of them they should be able to transport any liquid and there should be a tool that requires two tool rods made of seared stone and a seared stone tinker tool head that requires one ingot of seared stone to make all has to be done in the smelter and the tool should look like a mini-hammer if you right click on a side of the seared piping that is connected to something that can hold liquid with a seared tool it should pop open a gui with two sections with options for pump out pump in and active on Redstone signal active without Redstone signal or always active and you should be able to click on seared faucets with the tool and do the same thing and you should be able to make seared filters with seared tool rods in the middle and four corners of the crafting grid with seared ingots filling up the rest for three seared filters you should be able to place these on the seared piping and right click on it with the seared tinker tool and have it open up a gui to allow you to select what liquids can pass through and could you make it where seared tanks connected when touching vertically so it could be easier to pump liquids in to all the tanks and have a liquid ingot storage system. I think all of this should be added for easier moving of liquids in and out of the smelter and making a liquid storage room for ores.(Throughout this post I have called things seared ingots I mean the item version of seared bricks and the tools made using seared bricks should have slightly better than iron speed and durability.)
  • #3749
    Stencil table doesn't work. I've see few spotlights, they all say that we need to put the cast into a stencil table, whereas when I put one in this, the only thing I can do is the ingot cast :
    Last edited by Nexey: 7/7/2013 5:25:52 PM
  • #3750
    Quote from Nexey

    Stencil table doesn't work. I've see few spotlights, they all say that we need to put the cast into a stencil table, whereas when I put one in this, the only thing I can do is the ingot cast :

    Well quoting the OP near the top of his post: "Casts are crafted by pouring Aluminum Brass/Gold on a tool part.", it seems like the stencil table isn't used anymore for those casts.
  • #3751
    Quote from deandip

    Well quoting the OP near the top of his post: "Casts are crafted by pouring Aluminum Brass/Gold on a tool part.", it seems like the stencil table isn't used anymore for those casts.

    There's no items corresponding to the name "tool part", or maybe I can't understand this (I'm not english)
    My mistake. The thing is, that I can't create tool part.
    Last edited by Nexey: 7/7/2013 5:53:38 PM
  • #3752
    i love your mod :lol: :GoldBar:
  • #3753
    Quote from Nexey

    There's no items corresponding to the name "tool part", or maybe I can't understand this (I'm not english)


    You may want to view an updated mod spotlight; most currently are out-of-date. To explain the process, you need to make casts by pouring either liquid aluminum brass or gold over the corresponding tool part. To make a pickaxe head cast for example, you need to make a pickaxe head out of either stone or wood at the part builder. Once you have the part, right-click to place it in a casting table. Then you can drain the liquid metal into the casting table around the part using the seared faucet and it will harden into a pickaxe head cast. Follow the same steps for each individual part. Hopefully that makes more sense.
    Last edited by SageEthereal: 7/7/2013 5:57:23 PM
  • #3754
    Quote from SageEthereal

    You may want to view an updated mod spotlight; most currently are out-of-date. To explain the process, you need to make casts by pouring either liquid aluminum brass or gold over the corresponding tool part. To make a pickaxe head cast for example, you need to make a pickaxe head out of either stone or wood at the part builder. Once you have the part, right-click to place it in a casting table. Then you can drain the liquid metal into the casting table around the part using the seared faucet and it will harden into a pickaxe head cast. Follow the same steps for each individual part. Hopefully that makes more sense.

    Like this ?
    If yes, it doesn't work though :/
    I had molten iron in the smeltery station, I'll try with aluminium brass -_-

    EDIT : Hurray ! Now it works ! And yes, I was searching an updated mod review.
    Thanks a lot !
    Last edited by Nexey: 7/7/2013 6:03:47 PM
  • #3755
    Quote from Nexey

    Like this ?
    If yes, it doesn't work though :/
    I had molten iron in the smeltery station, I'll try with aluminium brass -_-


    That is correct. You can use either aluminum brass or gold, although in the current stable release it will cost twice as much gold per cast (it takes 2 ingots worth of molten gold to make one cast, it only takes 1 ingot worth of molten aluminum brass to make one cast).
  • #3756
    Quote from TheLastAlchemist

    Mdiyo I think that you should add an item called seared piping which should have the seared tanks texture turned on its side and should be 16 pixels long and 8x8 pixels wide placed in the middle of the block area sort of like energy conduits from thermal expansion it should be crafted like a seared drain but with seared glass panes in replace of the empty crafting spots to get 8 of them they should be able to transport any liquid and there should be a tool that requires two tool rods made of seared stone and a seared stone tinker tool head that requires one ingot of seared stone to make all has to be done in the smelter and the tool should look like a mini-hammer if you right click on a side of the seared piping that is connected to something that can hold liquid with a seared tool it should pop open a gui with two sections with options for pump out pump in and active on Redstone signal active without Redstone signal or always active and you should be able to click on seared faucets with the tool and do the same thing and you should be able to make seared filters with seared tool rods in the middle and four corners of the crafting grid with seared ingots filling up the rest for three seared filters you should be able to place these on the seared piping and right click on it with the seared tinker tool and have it open up a gui to allow you to select what liquids can pass through and could you make it where seared tanks connected when touching vertically so it could be easier to pump liquids in to all the tanks and have a liquid ingot storage system. I think all of this should be added for easier moving of liquids in and out of the smelter and making a liquid storage room for ores.(Throughout this post I have called things seared ingots I mean the item version of seared bricks and the tools made using seared bricks should have slightly better than iron speed and durability.)


    Good god man! Translation:

    "Mdiyo, I think that you should add an item called seared piping. This should have the seared tank's texture turned on its side, and it should be 16 pixels long and 8x8 pixels wide, placed in the middle of the block area. Sort of like energy conduits from Thermal Expansion

    It should be crafted like a seared drain, but with seared glass panes instead of the empty crafting spots. This would craft 8 of them. They should be able to transport any liquid, and there should be a tool that requires two tool rods, made of seared stone, and a seared stone tinker tool head that requires one ingot of seared stone.

    All that has to be done in the smelter, and the tool should look like a mini-hammer. If you right click on a side of the seared piping (that is connected to something that can hold liquid) with a seared tool, it should open a GUI with two sections with options for 'pump out' and 'pump in,' and a section for 'active on Redstone signal' and 'active without Redstone signal' or 'always active.' You should be able to click on seared faucets with the tool and do the same thing.

    An item called 'seared filters' is made with seared tool rods in the middle and four corners of the crafting grid, with seared ingots filling up the rest. This would make 3 seared filters. You should be able to place these on the seared piping and right click on it with the seared tinker tool and have it open up a gui to allow you to select what liquids can pass through.

    Also, could you make it where seared tanks connect when touching vertically so it could be easier to pump liquids into all the tanks and have a liquid ingot storage system?

    I think all of this should be added for easier moving of liquids in and out of the smelter and making a liquid storage room for ores.(Throughout this post I have called things seared ingots I mean the item version of seared bricks and the tools made using seared bricks should have slightly better than iron speed and durability.)"


    ((Note, I am normally not a grammar nazi at all. I'm of the opinion that as long as you understand what's written, you shouldn't care if there are mistakes. However, I had a difficult time understanding what he meant, and wanted to comment on it.))

    TheLastAlchemist: I don't agree that this should be added at all. There are already at least one or two mods that do this already. Buildcraft handles liquids very well. Everything you suggest is already done with other mods.

    My suggestion to you, is to just get Buildcraft to make your room full of molten metal. That's what I'm going to do. A giant underground corridor, filled with enormous glass tanks, filled with every type of liquid that exists. I can picture it now. It makes me happy.
    Last edited by dontremb: 7/7/2013 6:51:15 PM

    (Redefining Multiplayer. Click the banner to check it out.)
  • #3757
    Finally, a use for lapis! :D
    net/topic/1117775-152-too-much-tnt-mod-25-new-tnts/" target="">
  • #3758
    Quote from TheLastAlchemist

    Mdiyo I think that you should add an item called seared piping which should have the seared tanks texture turned on its side and should be 16 pixels long and 8x8 pixels wide placed in the middle of the block area sort of like energy conduits from thermal expansion it should be crafted like a seared drain but with seared glass panes in replace of the empty crafting spots to get 8 of them they should be able to transport any liquid and there should be a tool that requires two tool rods made of seared stone and a seared stone tinker tool head that requires one ingot of seared stone to make all has to be done in the smelter and the tool should look like a mini-hammer if you right click on a side of the seared piping that is connected to something that can hold liquid with a seared tool it should pop open a gui with two sections with options for pump out pump in and active on Redstone signal active without Redstone signal or always active and you should be able to click on seared faucets with the tool and do the same thing and you should be able to make seared filters with seared tool rods in the middle and four corners of the crafting grid with seared ingots filling up the rest for three seared filters you should be able to place these on the seared piping and right click on it with the seared tinker tool and have it open up a gui to allow you to select what liquids can pass through and could you make it where seared tanks connected when touching vertically so it could be easier to pump liquids in to all the tanks and have a liquid ingot storage system. I think all of this should be added for easier moving of liquids in and out of the smelter and making a liquid storage room for ores.(Throughout this post I have called things seared ingots I mean the item version of seared bricks and the tools made using seared bricks should have slightly better than iron speed and durability.)
    Nice wall of text.
    I'm not even going to try reading that...

    Protip: PARAGRAPHS
  • To post a comment, please or register a new account.
Posts Quoted:
Reply
Clear All Quotes