Stairs are also messed up in the 3D models pack. When placed upside down they don't do corners correctly. The brewing stand is also missing a model, and became the checkered box. To fix these issues, open up the pack, go to assets\minecraft\blockstates, and delete or rename the following:
I am a long time fan of this texture pack, but unfortunately have been experiencing issues using it lately.
Have been trying to get back onto Ravand, running MC 1.7.10 with Optifine 1.7.10 HD U D3. This on a Imac late 2009 27" with OS X El Captan (ver. 10.11.4) 8GB memory and an ATI Radeon HD 4670 256MB graphics card ~ Some web research indicate this may a driver issue.
Problem I have is that at first I have fully textures, then after a while, all become transparent except a few items, as per attached image:
If I remove the resource pack and revert back to default, all textures are visible.
Conquest resource pack is expanded and located in resource pack folder, and as mentioned loads correctly first at the beginning before later loosing all/most textures.
Ant advice to resolve would be greatly appreciated. Right now a new PC or graphics card are not viable options
Guys I need help. Conquest won't work for me at all in 1.9. Everything looks white. It only happens when the connected textures are on. (I have Optifine for 1.9 btw). Is it Conquest? Or is it my PC or Optifine? Also, this never happened to me in 1.8 :/
Let's just say I have reached the end of the road. As I suspect it is graphic card related due to the Mac OS not supporting a suitable graphic driver to keep up with the ever expanding resource pack, until I invest in another desktop will have to take a forced break from my favourite resource pack.
I have previously in earlier release in both the MC version and this resource pack never had issues but the last few updates are just not working for me anymore.
I have even tried forcing the launcher to use lower resolutions via custom values in the profiles etc. In a small window if often first works fine, but once I go full screen on the 27" display, Boom! it all breaks.
Just letting you know that some textures in the 3D pack are missing, like sideways wooden blocks, and chiseled stone. Also, Im not a fan of the item frames, because i like to use them as draws in kitchens and other things, and the shelf look doesn't work with it
Just letting you know that some textures in the 3D pack are missing, like sideways wooden blocks, and chiseled stone. Also, Im not a fan of the item frames, because i like to use them as draws in kitchens and other things, and the shelf look doesn't work with it
So my two high glass panes have the book shelf texture. How do i fix this?
Rollback Post to RevisionRollBack
Quote from Blaze »
So you wake up on a beach one day, and remember NOTHING. (Except your degree teachings in Engineering, Wilderness Survival, Metal work, Physics, Tech, Psychology, History, Dynamics, and Blocks.) You mine and build and survive for years and years.
Guys I need help. Conquest won't work for me at all in 1.9. Everything looks white. It only happens when the connected textures are on. (I have Optifine for 1.9 btw). Is it Conquest? Or is it my PC or Optifine? Also, this never happened to me in 1.8 :/
I've been having this same issue, and I don't know if it's my graphics card, Optifine or the pack.
If anyone could help us with this it'd be much appreciated!
I'm having a hard time using this pack on Dynmap. For some reason water is not rendering at all from overhead view and rendering one block below normal on surface view. Pretty sure it's conquest, as Dynmap handles its own pack just fine. Any help appreciated.
I'm having a hard time using this pack on Dynmap. For some reason water is not rendering at all from overhead view and rendering one block below normal on surface view. Pretty sure it's conquest, as Dynmap handles its own pack just fine. Any help appreciated.
It's because the water in this pack is basically black.
Ok,
but I don't really like it like that, do you know how I can use the normal water like you see it ingame or maybe the water from anpther rp?
Can you give us a code for a custom head texture for the vanilla chest?
I just took the Minecraft Noob test! Check out what I scored. Think you can beat me?!
To take the test, check out
https://minecraftnoobtest.com/test.php
Don't click this link, HE is haunting it...
Stairs are also messed up in the 3D models pack. When placed upside down they don't do corners correctly. The brewing stand is also missing a model, and became the checkered box. To fix these issues, open up the pack, go to assets\minecraft\blockstates, and delete or rename the following:
The 3d addon pack is not maintained by monsterfish, so for problems with that go here: http://www.planetminecraft.com/texture_pack/conquest-3d-model-pack-addon/
I am a long time fan of this texture pack, but unfortunately have been experiencing issues using it lately.
Have been trying to get back onto Ravand, running MC 1.7.10 with Optifine 1.7.10 HD U D3. This on a Imac late 2009 27" with OS X El Captan (ver. 10.11.4) 8GB memory and an ATI Radeon HD 4670 256MB graphics card ~ Some web research indicate this may a driver issue.
Problem I have is that at first I have fully textures, then after a while, all become transparent except a few items, as per attached image:
If I remove the resource pack and revert back to default, all textures are visible.
Conquest resource pack is expanded and located in resource pack folder, and as mentioned loads correctly first at the beginning before later loosing all/most textures.
Ant advice to resolve would be greatly appreciated. Right now a new PC or graphics card are not viable options
This has been happening to me too. I just assume it's a temporary glitch and will be sorted out eventually.
Guys I need help. Conquest won't work for me at all in 1.9. Everything looks white. It only happens when the connected textures are on. (I have Optifine for 1.9 btw). Is it Conquest? Or is it my PC or Optifine? Also, this never happened to me in 1.8 :/
Let's just say I have reached the end of the road. As I suspect it is graphic card related due to the Mac OS not supporting a suitable graphic driver to keep up with the ever expanding resource pack, until I invest in another desktop will have to take a forced break from my favourite resource pack.
I have previously in earlier release in both the MC version and this resource pack never had issues but the last few updates are just not working for me anymore.
I have even tried forcing the launcher to use lower resolutions via custom values in the profiles etc. In a small window if often first works fine, but once I go full screen on the 27" display, Boom! it all breaks.
Hey Sharkyzn, what's your ram and cpu ussage in the small window and fullscreen?
The graficscard should not be a problem as stupid minecraft uses the cpu to render.
Also what cpu do you have?
Edit: If you think osx is the problem you could also look into dual boot.
Just letting you know that some textures in the 3D pack are missing, like sideways wooden blocks, and chiseled stone. Also, Im not a fan of the item frames, because i like to use them as draws in kitchens and other things, and the shelf look doesn't work with it
So my two high glass panes have the book shelf texture. How do i fix this?
I've been having this same issue, and I don't know if it's my graphics card, Optifine or the pack.
If anyone could help us with this it'd be much appreciated!
Friendship is magic!
It probably means you're running out of VRAM. How much do you have?
I don't know if this will funny answer your question.
But upon looking up in the dxdiag thingy it says I have "Approx. Total Memory: 1696 MB"
I don't know if that's VRAM, but googling what it was told me to do this.
Friendship is magic!
Hello again.
I now have an issue i dont understand.
First i run Conquest V10.2, on MC 1.7.10.
There i have Forge 10.13.2.1300 and Optifine 1.7.10 HD U B7.
Ive tried with both latest of Optfine for 1.7.10.
I have connected textures set to fancy and still i see this:
How can i fix it?
I'm having a hard time using this pack on Dynmap. For some reason water is not rendering at all from overhead view and rendering one block below normal on surface view. Pretty sure it's conquest, as Dynmap handles its own pack just fine. Any help appreciated.
It's because the water in this pack is basically black.
Here's an overhead view. In game the part with sand has water overtop, but in this view it's simply not there.
Here's
a side view. The water is rendering one block lower than it should, as
in game it is all the way up to the edge of the test area I made.
I found the error. Its caused by the option: Rounded/better leaves in the Better Foliage mod.
When i disabled it, the error was gone. Still i miss how the leaves look but its better without the letters