I'm not sure exactly what to do with the updated branch, I downloaded the main file from adfly which gave me regionfixer v0.2.0, then went to the 1-3 branch and downloaded it then paste the files into the main folder, replacing the old files with the new ones from the 1-3 branch.
My issue is when I scan a world, I get an error upon scanning regions. I tried scanning 3 regions manually, and only 1 of three scanned without error. Are the errored regions the ones I need to replace? I have 15 regions, so if I can scan each one and delete whatever ones error, I wouldn't mind if it got my world to work again.
The reason it broke was because I made a command block summon a snowball on every snowball it finds, which I didn't realize at the time what would happen lol.
I can't run the region fixer in windows 10. I my AV tried to block it, I excluded it and disabled my AV, but it's still not lunching fully. It closes itself after the GUI executable opens for a few seconds.
I'm afraid that the GUI doesn't work. The code is outdated and I haven't put the time to update it. If you want to run regionfixer you have to use the CLI. See the wiki and the examples to know how to do so.
I'm using windows 10 and it doesn't work especially the py file type. So I'm planing to do it in another computer (windows 7). Can you list the steps to what I need to do to execute the file in cmd Especially the new update that uses py filefile(don't k ow how to use them, only exe. Sorry). Thanks for the reply.
I have been trying to get this to work for over an hour, trying various versions. Your tutorials are either too confusing or just don't work for Windows 10. I even set up Python, even though I'm supposed to use CMD. Nothing is working, and your wiki is just as confusing.
Why don't YOU, Fenixin, record YOURSELF doing this on a FRESH install of Windows 10 and show us how this works?
I have been trying to get this to work for over an hour, trying various versions. Your tutorials are either too confusing or just don't work for Windows 10. I even set up Python, even though I'm supposed to use CMD. Nothing is working, and your wiki is just as confusing.
Why don't YOU, Fenixin, record YOURSELF doing this on a FRESH install of Windows 10 and show us how this works?
I'm sorry but I'm not really into recording stuff and uploading it to youtube. Also, I barely have the time to keep regionfixer working so doing more stuff is out of the question. Also, there seems to be a few youtube tutorials around already.
I don't mind helping anyone that has problems using regionfixer. Just tell me what is your problem and I will be more than happy to help you. But the time I'm willing to spend on regionfixer is scarce, so don't expect the answer when you want it.
Just tell me what part of the wiki you think is confusing and why, propose a solution and if it's really better the next time I spend some time fixing regionfixer I will change it.
All that said, what was your problem? What error printed regionfixer? What version of regionfixer are you using? What version of python?
I'm in the same boat as Sidonius. It just doesn't work.
I have Windows 10. I have python 3.8.0 installed, and it recognizes .py files as python files. I downloaded Region Fixer and put it in a folder that's definitely not read-only. I use the "cd" command to point to the directory where region fixer is installed. So CMD reads:
C:\mcregionfixer>_
Typing in "regionfixer.py --help" does nothing (though for a brief moment, it seems that cmd is attempting to load something).
Typing "regionfixer.py" followed by a space, and then the directory of the save folder does nothing. Using other directories -- going directly to region\*.mca; trying literally any other directory, etc. -- does nothing. I have tried putting "python" before the command, or the command in quotes. I have tried renaming regionfixer and the folder it is in. I have reinstalled both python and regionfixer multiple times. I have restarted my computer. I have tried placing my minecraft save in a different folder as well. I tried running it through the python command line just for the hell of it.
Nothing is working.
All video tutorials are out of date (the latest one I can find is from 2018), and all of them refer to the .exe version of regionfixer, which isn't available anymore, so the tutorials are useless to me. Your wiki is, and I'm sorry to say this, incredibly unhelpful to those of us who don't have proper knowledge of command lines -- step-by-step instructions detailing everything from start to finish would be an absolute lifesaver for half the people here. I have literally spent three hours banging my head against a brick wall trying to fix my corrupted world -- all other methods I can find either don't work (like swapping level.dat to a new save file) or are out of date (like MCEdit).
Uploading my save is a last resort for me, since the save folder is 5 GB in size (I hand-painted the entire world in WorldPainter, approximately 16x16 kilometers) and I have incredibly slow internet (it could take me at least two hours to upload it). I'd rather do it on my own computer if possible.
I hope this post doesn't come off as snappy or rude, but I'm quite literally at the end of my rope here, and this program could very well save the hundreds of hours I've put into creating this world.
The command line now seems to recognize that regionfixer.py is something that can actually be run, but it still spits out an error:
C:\mcregionfixer>regionfixer.py --help
Usage:
region_fixer [options] <world-path> <other-world-path> ... <region-files> ...
no such option: Error: No world paths or region files specified! Use --help for a complete list of options.
C:\mcregionfixer>_
The error is telling me to use the --help options... which I just did. Again, any other variations of the command I can think of (putting quotes around the file path, typing "python regionfixer.py", etc.) either do nothing, or gives this error.
The fact that CMD is now recognizing regionfixer is giving me a little hope, at least.
Region-fixer doesn't work with minecraft 1.13. I will update it in the next weeks.
Any progress on a 1.13.1 update?
Having some corruption issues I think that need to be solved
- ZethrusTV
CEO / Lead Developer @ Miner's Glory
There is already a working version, please, use this branch:
https://github.com/Fenixin/Minecraft-Region-Fixer/tree/1-3-update
I will make a release soon (tm).
I'm not sure exactly what to do with the updated branch, I downloaded the main file from adfly which gave me regionfixer v0.2.0, then went to the 1-3 branch and downloaded it then paste the files into the main folder, replacing the old files with the new ones from the 1-3 branch.
My issue is when I scan a world, I get an error upon scanning regions. I tried scanning 3 regions manually, and only 1 of three scanned without error. Are the errored regions the ones I need to replace? I have 15 regions, so if I can scan each one and delete whatever ones error, I wouldn't mind if it got my world to work again.
The reason it broke was because I made a command block summon a snowball on every snowball it finds, which I didn't realize at the time what would happen lol.
I dont know what to do it crashes everytime
Theres the bug report. please help me my Server has big problems with it.
A new working version of region fixer can be found in this branch new2to3
This a WIP with new feature and bugs. This new branch will become the new version once finished.
New version is out, it updates NBT and fixes a bunch of bugs. There is not GUI nor windows exe yet.
The file is not there, I keep getting a 404 error when trying to go to the above link
Well, that link was for the development version. The new version has been released, so you should look in releases or in master, here is the link for releases: https://github.com/Fenixin/Minecraft-Region-Fixer/releases
Good luck!
I can't run the region fixer in windows 10. I my AV tried to block it, I excluded it and disabled my AV, but it's still not lunching fully. It closes itself after the GUI executable opens for a few seconds.
Est. 2011 (1.7.3 Beta)
Hello MrPapaveraceae!
I'm afraid that the GUI doesn't work. The code is outdated and I haven't put the time to update it. If you want to run regionfixer you have to use the CLI. See the wiki and the examples to know how to do so.
If you have any questions don't hesitate to ask.
I'm using windows 10 and it doesn't work especially the py file type. So I'm planing to do it in another computer (windows 7). Can you list the steps to what I need to do to execute the file in cmd Especially the new update that uses py filefile(don't k ow how to use them, only exe. Sorry). Thanks for the reply.
Hello!
Please, give the wiki of the project a go, maybe it solves you question:
https://github.com/Fenixin/Minecraft-Region-Fixer/wiki/Installation
After installing the python interpreter you could check:
https://github.com/Fenixin/Minecraft-Region-Fixer/wiki/Usage
If you have more question after reading that, I will be more than happy to help.
I have been trying to get this to work for over an hour, trying various versions. Your tutorials are either too confusing or just don't work for Windows 10. I even set up Python, even though I'm supposed to use CMD. Nothing is working, and your wiki is just as confusing.
Why don't YOU, Fenixin, record YOURSELF doing this on a FRESH install of Windows 10 and show us how this works?
I'm sorry but I'm not really into recording stuff and uploading it to youtube. Also, I barely have the time to keep regionfixer working so doing more stuff is out of the question. Also, there seems to be a few youtube tutorials around already.
I don't mind helping anyone that has problems using regionfixer. Just tell me what is your problem and I will be more than happy to help you. But the time I'm willing to spend on regionfixer is scarce, so don't expect the answer when you want it.
Just tell me what part of the wiki you think is confusing and why, propose a solution and if it's really better the next time I spend some time fixing regionfixer I will change it.
All that said, what was your problem? What error printed regionfixer? What version of regionfixer are you using? What version of python?
Version 0.3.2 is out!
This is a bugfix release that fixes a few bugs. See the release page in github.
thank you!
I'm glad it was helpful!
I'm in the same boat as Sidonius. It just doesn't work.
I have Windows 10. I have python 3.8.0 installed, and it recognizes .py files as python files. I downloaded Region Fixer and put it in a folder that's definitely not read-only. I use the "cd" command to point to the directory where region fixer is installed. So CMD reads:
C:\mcregionfixer>_
Typing in "regionfixer.py --help" does nothing (though for a brief moment, it seems that cmd is attempting to load something).
Typing "regionfixer.py" followed by a space, and then the directory of the save folder does nothing. Using other directories -- going directly to region\*.mca; trying literally any other directory, etc. -- does nothing. I have tried putting "python" before the command, or the command in quotes. I have tried renaming regionfixer and the folder it is in. I have reinstalled both python and regionfixer multiple times. I have restarted my computer. I have tried placing my minecraft save in a different folder as well. I tried running it through the python command line just for the hell of it.
Nothing is working.
All video tutorials are out of date (the latest one I can find is from 2018), and all of them refer to the .exe version of regionfixer, which isn't available anymore, so the tutorials are useless to me. Your wiki is, and I'm sorry to say this, incredibly unhelpful to those of us who don't have proper knowledge of command lines -- step-by-step instructions detailing everything from start to finish would be an absolute lifesaver for half the people here. I have literally spent three hours banging my head against a brick wall trying to fix my corrupted world -- all other methods I can find either don't work (like swapping level.dat to a new save file) or are out of date (like MCEdit).
Uploading my save is a last resort for me, since the save folder is 5 GB in size (I hand-painted the entire world in WorldPainter, approximately 16x16 kilometers) and I have incredibly slow internet (it could take me at least two hours to upload it). I'd rather do it on my own computer if possible.
I hope this post doesn't come off as snappy or rude, but I'm quite literally at the end of my rope here, and this program could very well save the hundreds of hours I've put into creating this world.
Refer to me as Kanny (they/them)
Next-day update:
The command line now seems to recognize that regionfixer.py is something that can actually be run, but it still spits out an error:
The error is telling me to use the --help options... which I just did. Again, any other variations of the command I can think of (putting quotes around the file path, typing "python regionfixer.py", etc.) either do nothing, or gives this error.
The fact that CMD is now recognizing regionfixer is giving me a little hope, at least.
Refer to me as Kanny (they/them)