I'd like to say to the creator that this mod is by far the most used mod in my repertoire. Thank you for the amazing concept and great execution! Now that the brown nosing is thoroughly completed, I was wondering if anyone has an idea on how I could modify the printer function to only pull resources from my hotbar?
I'm a little OCD at times and when I am leaving my little hut I load up with X materials for the projects in front of me but at times I will flick on the printer and would use more supplies than I prepared for (I know, my fault!), leaving me high and dry on the other items I was planning on.
Weird request for a weird reason, I know.
So I looked through the config and didn't see anything that I could do to limit the printer to only using what was in my hotbar and figured I would reach out to this crowd to see if it is something I missed or if this is not something that can be done from my end.
Thanks!
Rollback Post to RevisionRollBack
There are 10 types of people in this world. Those that understand binary and those that don't.
Hello,
I have a problem that hinder me a lot. When I turn on the schematica, it flicker strongly and uncorrectly displays the blocks that are already built and which haven`t been built yet. What could be the problem?
Thank you.
P.S. Sorry for my English, I don`t know this language wery well.
Regarding the material listing showing feedback. It's more for redstone and slime block contraptions with a lot of blocks where even a single misplaced block can cause issues. The material list provides very useful info to give reliable feedback of the finished build. The main issue is just that there could be rogue blocks in wrong places or other unforeseeable issues during the placement that can cause havoc. It would be really nice getting some feedback in the material list to know if there is some misplaced blocks somewhere. Specially when the builds are large enough for errors to be concealed behind other blocks. That is when you really rely on the material tab, just that the material tab wont give you the rogue blocks and sometimes in redstone give you false negatives.
The problem is, how would I incorporate that into the material list. Say that there is a few redstone dusts in the wrong state somewhere in the build. How should that be displayed, do you have anything on your mind, any examples?
I'd like to say to the creator that this mod is by far the most used mod in my repertoire. Thank you for the amazing concept and great execution! Now that the brown nosing is thoroughly completed, I was wondering if anyone has an idea on how I could modify the printer function to only pull resources from my hotbar?
I'm a little OCD at times and when I am leaving my little hut I load up with X materials for the projects in front of me but at times I will flick on the printer and would use more supplies than I prepared for (I know, my fault!), leaving me high and dry on the other items I was planning on.
Weird request for a weird reason, I know.
So I looked through the config and didn't see anything that I could do to limit the printer to only using what was in my hotbar and figured I would reach out to this crowd to see if it is something I missed or if this is not something that can be done from my end.
Thanks!
The only way to disable this is to remove all swap slots from the configuration. That should prevent the printer from swapping materials automatically to the hotbar.
Is there a way to check all the blocks i need to make it? like can i get a list with the amounts of blocks i need or would it just be easier to do that in MCedit?
Hello, I have a problem that hinder me a lot. When I turn on the schematica, it flicker strongly and uncorrectly displays the blocks that are already built and which haven`t been built yet. What could be the problem? Thank you. P.S. Sorry for my English, I don`t know this language wery well.
No need for big letters. How does it flicker? Can you supply some screenshots or videos that show what exactly the issue is?
Hello,
I have a problem that hinder me a lot. When I turn on the schematica, it flicker strongly and uncorrectly displays the blocks that are already built and which haven`t been built yet. What could be the problem?
Thank you.
P.S. Sorry for my English, I don`t know this language wery well.
I already solved this problem ... I just downloaded optifine and disabled the quick render in the settings. Maybe It`s a bug of my video card. Nothing serious. But anyway thanks.
GitHubLynx did a pull 4 days ago and stealth updated schematica to 1.12. I hope I'm not stepping on Lunatrius toes but its out for anyone who is interested.
I tried Compiling GitHubLynx's version, but I failed on 'gradlew setupDevWorkspace' process on schematica. It was successful compiling Lunatriscore though. I wonder it is only me failing to compile schematica of that version.
I have been using Schematica for quite a while now. I do a lot of map art and I have always wondered if it's possible to flip the schematic horizontally? I use Spritecraft to do my pixel art, and it has an option to save it as a schematic, but when I save the schematic and open it, it's vertical. Now, you might see my problem now, since maps are horizontal. Thus, my question: can a schematic be flipped horizontally?
I have been using Schematica for quite a while now. I do a lot of map art and I have always wondered if it's possible to flip the schematic horizontally? I use Spritecraft to do my pixel art, and it has an option to save it as a schematic, but when I save the schematic and open it, it's vertical. Now, you might see my problem now, since maps are horizontal. Thus, my question: can a schematic be flipped horizontally?
Howdy all - Long time creeper, first time poster.
I'd like to say to the creator that this mod is by far the most used mod in my repertoire. Thank you for the amazing concept and great execution! Now that the brown nosing is thoroughly completed, I was wondering if anyone has an idea on how I could modify the printer function to only pull resources from my hotbar?
I'm a little OCD at times and when I am leaving my little hut I load up with X materials for the projects in front of me but at times I will flick on the printer and would use more supplies than I prepared for (I know, my fault!), leaving me high and dry on the other items I was planning on.
Weird request for a weird reason, I know.
So I looked through the config and didn't see anything that I could do to limit the printer to only using what was in my hotbar and figured I would reach out to this crowd to see if it is something I missed or if this is not something that can be done from my end.
Thanks!
There are 10 types of people in this world. Those that understand binary and those that don't.
Hello,
I have a problem that hinder me a lot. When I turn on the schematica, it flicker strongly and uncorrectly displays the blocks that are already built and which haven`t been built yet. What could be the problem?
Thank you.
P.S. Sorry for my English, I don`t know this language wery well.
yes you can its auto keybinded to - on the keyboard
Just found this a few days ago, this is one of my all time favorite mods!
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumThe problem is, how would I incorporate that into the material list. Say that there is a few redstone dusts in the wrong state somewhere in the build. How should that be displayed, do you have anything on your mind, any examples?
The only way to disable this is to remove all swap slots from the configuration. That should prevent the printer from swapping materials automatically to the hotbar.
It's in the operation GUI, under material list.
No need for big letters. How does it flicker? Can you supply some screenshots or videos that show what exactly the issue is?
When it's done.
I already solved this problem ... I just downloaded optifine and disabled the quick render in the settings. Maybe It`s a bug of my video card. Nothing serious. But anyway thanks.
Could this be modified to print repeater ticks?
Hey you wanna go grab coffee sometime? Also @Lunatrius please update the darn mod it's been weeks babe :3
All it did was give me a "master folder" with a bunch of files. How do I use this?
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumGitHubLynx put up a temporary build fo 1.12, but I have a few things that I want to fix/get done before a full 1.12 release.
I've had some issues with my computer not even booting up, which took a while to fix. Should get something done today, but no date for a release yet.
I tried Compiling GitHubLynx's version, but I failed on 'gradlew setupDevWorkspace' process on schematica. It was successful compiling Lunatriscore though. I wonder it is only me failing to compile schematica of that version.
Can some one please post a link to the 1.12 update?
what are some of the things that you want to get done I'm excited, and I see that you don't have a release date but will we be getting it this month?
Greetings,
Once you load a schematic, is it possible to save your progress so that once you log in you don't have to re-position the schematic? @Lunatrius
my schematic placed blocks keep dissapearing in printer help
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumSP or MP?
---
The 1.12 update should be out in the next few days.
Yay! You're a superstar Lunatrius!
I give position coords in schematic name to ease the setup.
Hey Lunatrius-
I have been using Schematica for quite a while now. I do a lot of map art and I have always wondered if it's possible to flip the schematic horizontally? I use Spritecraft to do my pixel art, and it has an option to save it as a schematic, but when I save the schematic and open it, it's vertical. Now, you might see my problem now, since maps are horizontal. Thus, my question: can a schematic be flipped horizontally?
Thanks,
Frootloopstoucan
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumBottom right of the control UI.