Would it be possible that SPC could save the difficulty for a world if you set it with "diff"?
So if I set a world to peaceful with "diff 0" that it would restore the difficulty to peaceful upon loading that world?
or, you could put the escape key and change the difficulty yourself
Please HELP!
I don't get the text when i type anything. I tried everything, I used mcpatcher it didn't work, I tried manually and it still didn't work! BTW I'm using a MAC.
/confusesuicide wont make the mobs attack eachother, they are just taking damage. am I doing it wrong or?
I have the same problem... I spawned a few skeletons and zombies, and then used this. They all got damaged, but then didn't do anything. There is only one time I can recall it actually working for me, where two skeletons fought, but that was it...
Rollback Post to RevisionRollBack
See that green arrow? If I helped you, make sure to click on it!
i need help with soemthing, i wanna use this for a map just so i can use spawners, but however when im done i wanan uninstall it, cuz i dont like mods cluttering up my game, how do i uninstall this without force updating or deleting my bin?
Well if you backed up your minecraft.jar file (it gives you the option too) you can just replace it with the one that is in the bin and just re-name it to minecraft.
If you didnt back up your minecraft.jar then you have to either force update or delete your bin.
It allowed me to play a wonderful prank on my younger brother. I rebound his most used keys (such as walk, jump, inventory, etc) to /cannon. Of course I backed up his worlds first and set it up so that he can easily unbind all the keys by pressing M. I'm not that mean.
lol
that's a really good prank! I'd like to know his reaction to it!
Is there anyway you can rotate the area you have selected in a 90 degree angle or anything.
So lets say something is in this orientation:
And i want to make it in this orientation:
So i am turning it 90' clockwise. Is there any command like this and can you tell me how to enter it if there is.
Yes, that's a WE command.
You can rotate the selection, this is how I do:
1. Select the area 2. copy it to clipboard (//copy) ** it makes a copy of the selection from where you are (coordinates of where you're standing), you gonna have to test some to understand. 3. //rotate 90 (or also in your case shown above, you could have flip it to south (assuming that south is the bottom of the page!): //flip s)
4. //paste (it pastes the clipboard from where you copied it and with the rotation or flip done.
You have to place yourself on the point of rotation or flip. In your schema, I'd put myself around the "i" of: "And i want to make it in...! to do the copy and rotate, then, turn around and paste it! Check video tutorials if it's still confusing.
WE commands: http://wiki.sk89q.co...dEdit/Reference
specific WE clipboard commands: check here --> http://wiki.sk89q.co...dEdit/Clipboard
everything else about WE: http://wiki.sk89q.com/wiki/WorldEdit
If I type /freeze all my dogs and cats come to me and teleport everywhere I go...
What the **** is that???? wrong installation, or only an Error??
It's a known and discussed problem with no known solution. I quit taming stuff, that works.
Lou
Below your avatar (upper right) is a search window. The answer to almost any question you can imagine may be found there. Here’s a plus, answers are instantaneous.
Possible reason why the worldedit wand doesn't work right is because it acts as a farwand, maybe now you can fix it?
Grzzz
vlamer12
Below your avatar (upper right) is a search window. The answer to almost any question you can imagine may be found there. Here’s a plus, answers are instantaneous.
Lou
It's been discussed to boredom... Read the discussion!
Page 1, Post 1, Command List, WorldEdit Commands, under "Utilities" (lava too, you must be within 1 block of the liquid you wish to remove). Be careful; it's possible to drain an ocean!!!
In "History" read the //undo command, it may save your bacon if your game doesn't crash or you haven't signed off.
Lou
I run almost all my WE tasks from macros. The //limit command helps prevent huge numbers of changes.
on the setjump command, it says "...move than 1" I believe it should be "...more than 1." Please fix this, it's one of my pet peeves, and it's really bothering me.By the way, I installed SPC manually and followed all directions, but WE commands don't work at all. I used 7-ZIP to intall, and the WorldEdit.jar file was a .zip file. would this affect anything? (I'm not positive that the world edit file is called that, bu that's what im calling it)EDIT:Sorry, I meant ...but that's what I'm calling it)
on the setjump command, it says "...move than 1" I believe it should be "...more than 1." Please fix this, it's one of my pet peeves, and it's really bothering me.
By the way, I installed SPC manually and followed all directions, but WE commands don't work at all. I used 7-ZIP to intall, and the WorldEdit.jar file was a .zip file. would this affect anything? (I'm not positive that the world edit file is called that, bu that's what im calling it)
EDIT:Sorry, I meant ...but that's what I'm calling it)
Below your avatar (upper right) is a search window. The answer to almost any question you can imagine may be found there. Here’s a plus, answers are instantaneous.
Use 7-Zip and look in your minecraft.jar for worldedit.jar. If you find it there thats why WE doesn't work!
Page 1, post 1, READ and FOLLOW the installation instructions.
Lou
Yes, that's a WE command.
You can rotate the selection, this is how I do:
1. Select the area
2. copy it to clipboard (//copy) ** it makes a copy of the selection from where you are (coordinates of where you're standing), you gonna have to test some to understand.
3. //rotate 90 (or also in your case shown above, you could have flip it to south (assuming that south is the bottom of the page!): //flip s)
4. //paste (it pastes the clipboard from where you copied it and with the rotation or flip done.
You have to place yourself on the point of rotation or flip. In your schema, I'd put myself around the "i" of: "And i want to make it in...! to do the copy and rotate, then, turn around and paste it! Check video tutorials if it's still confusing.
WE commands: http://wiki.sk89q.co...dEdit/Reference
specific WE clipboard commands: check here --> http://wiki.sk89q.co...dEdit/Clipboard
everything else about WE: http://wiki.sk89q.com/wiki/WorldEdit
Thanks i read the page page ages ago but i thought that when i entered //rotate 90 it would do it automatically and i need though to do the //paste command.
Thanks i read the page page ages ago but i thought that when i entered //rotate 90 it would do it automatically and i need though to do the //paste command.
No problem... it's a bit tricky when you use it for the first time.
I usally refer to the Minecraft wiki page for items IDs: http://www.minecraft...and_data_values
You can also check in this file: itemnames.properties found there:
C:\Users\*your user name*\AppData\Roaming\.minecraft\mods\sppcommands
seems i've got issues with schematics and world edit.
I can't no longer use the "//save <filename>" and "//load <filename>"
why is this? i can't import schematics no more...
it says: "this command is no longer used. See //schematic save."
if i try to use "//schematic save <filename>" it says "//schematic save <format> <filename>"
what should i use as <format> ?
the format for WE 5.3 and after is mce.
You should read all the valuable informations here: http://wiki.sk89q.co...dEdit/Clipboard
Your question is answered in the loading and saving section.
*All users of this mod should read the entire page 1 (instructions and commands) and the same with WorldEdit functions. It's the best way to enjoy this mod and all its capacities. Otherwise, you may skip valuable information!!*
I think SPC 3.2.2 and ControlPack 5.0 have compatibility issues. -snip- Edit: Never mind, turns out if you disable the chat colation key in Control Pack it'll cause crashes when opening the chat.
ok. working! but if i manually want to import a schematic, where do i have to place it before loading it?
Well, when you save your schematic (actually, you first need to copy your selection to your clipboard), it automatically saves it inside a folder (C:\Users\*your user name*\AppData\Roaming\.minecraft\schematics)... put a name to your schematic (ex: //schematic save mce tower1), supposing tower1 is your structure. Then, in another area or another world, you type: //schematic load mce tower1... your structure is back to your clipboard and finally you do the paste command (paste from the location you were relative to your copied selection).
It is all well explained in the link I provide you. I think there's no other way to achieve that. If it's still unclear to you, I suggest that you might need to check video tutorials about it on youtube.
I don't get the text when i type anything. I tried everything, I used mcpatcher it didn't work, I tried manually and it still didn't work! BTW I'm using a MAC.
I have the same problem... I spawned a few skeletons and zombies, and then used this. They all got damaged, but then didn't do anything. There is only one time I can recall it actually working for me, where two skeletons fought, but that was it...
Say "thanks alot" to yourself. You installed it wrong.
So lets say something is in this orientation:
And i want to make it in this orientation:
So i am turning it 90' clockwise. Is there any command like this and can you tell me how to enter it if there is.
Well if you backed up your minecraft.jar file (it gives you the option too) you can just replace it with the one that is in the bin and just re-name it to minecraft.
If you didnt back up your minecraft.jar then you have to either force update or delete your bin.
lol
that's a really good prank! I'd like to know his reaction to it!
Yes, that's a WE command.
You can rotate the selection, this is how I do:
1. Select the area 2. copy it to clipboard (//copy) ** it makes a copy of the selection from where you are (coordinates of where you're standing), you gonna have to test some to understand. 3. //rotate 90 (or also in your case shown above, you could have flip it to south (assuming that south is the bottom of the page!): //flip s)
4. //paste (it pastes the clipboard from where you copied it and with the rotation or flip done.
You have to place yourself on the point of rotation or flip. In your schema, I'd put myself around the "i" of: "And i want to make it in...! to do the copy and rotate, then, turn around and paste it! Check video tutorials if it's still confusing.
WE commands: http://wiki.sk89q.co...dEdit/Reference
specific WE clipboard commands: check here --> http://wiki.sk89q.co...dEdit/Clipboard
everything else about WE: http://wiki.sk89q.com/wiki/WorldEdit
Reinstall the copy of the MC.jar the Installation Instructions told you to make.
Damn... You didn't read that either?
Lou
Page 1, post 1, Command List, See;
WorldEdit - Clipboard Commands.
Lou
It's a known and discussed problem with no known solution. I quit taming stuff, that works.
Lou
Below your avatar (upper right) is a search window. The answer to almost any question you can imagine may be found there. Here’s a plus, answers are instantaneous.
Links to pdf format, downloadable, command lists for (these often clarify/expand descriptions, and where possible link to the author's posting):
MoreCommands: http://www.mediafire.com/view/qjc9c6klcnp660e/CmdLstMoreCommands.pdf
WorldEdit: http://www.mediafire.com/view/bi7r00xd9rgxrrt/WE_Commands.pdf
Below your avatar (upper right) is a search window. The answer to almost any question you can imagine may be found there. Here’s a plus, answers are instantaneous.
Lou
It's been discussed to boredom... Read the discussion!
Page 1, Post 1, Command List, WorldEdit Commands, under "Utilities" (lava too, you must be within 1 block of the liquid you wish to remove). Be careful; it's possible to drain an ocean!!!
In "History" read the //undo command, it may save your bacon if your game doesn't crash or you haven't signed off.
Lou
I run almost all my WE tasks from macros. The //limit command helps prevent huge numbers of changes.
Links to pdf format, downloadable, command lists for (these often clarify/expand descriptions, and where possible link to the author's posting):
MoreCommands: http://www.mediafire.com/view/qjc9c6klcnp660e/CmdLstMoreCommands.pdf
WorldEdit: http://www.mediafire.com/view/bi7r00xd9rgxrrt/WE_Commands.pdf
aaaaaaaaahhhhhhhhhhhhh!!!!!!!!!!!!!!!
Below your avatar (upper right) is a search window. The answer to almost any question you can imagine may be found there. Here’s a plus, answers are instantaneous.
Use 7-Zip and look in your minecraft.jar for worldedit.jar. If you find it there thats why WE doesn't work!
Page 1, post 1, READ and FOLLOW the installation instructions.
Lou
Links to pdf format, downloadable, command lists for (these often clarify/expand descriptions, and where possible link to the author's posting):
MoreCommands: http://www.mediafire.com/view/qjc9c6klcnp660e/CmdLstMoreCommands.pdf
WorldEdit: http://www.mediafire.com/view/bi7r00xd9rgxrrt/WE_Commands.pdf
Lots of diamonds, spawners and fun!
Thanks i read the page page ages ago but i thought that when i entered //rotate 90 it would do it automatically and i need though to do the //paste command.
No problem... it's a bit tricky when you use it for the first time.
I usally refer to the Minecraft wiki page for items IDs: http://www.minecraft...and_data_values
You can also check in this file: itemnames.properties found there:
C:\Users\*your user name*\AppData\Roaming\.minecraft\mods\sppcommands
the format for WE 5.3 and after is mce.
You should read all the valuable informations here: http://wiki.sk89q.co...dEdit/Clipboard
Your question is answered in the loading and saving section.
---------------------------------------------------------------
*All users of this mod should read the entire page 1 (instructions and commands) and the same with WorldEdit functions. It's the best way to enjoy this mod and all its capacities. Otherwise, you may skip valuable information!!*
Well, when you save your schematic (actually, you first need to copy your selection to your clipboard), it automatically saves it inside a folder (C:\Users\*your user name*\AppData\Roaming\.minecraft\schematics)... put a name to your schematic (ex: //schematic save mce tower1), supposing tower1 is your structure. Then, in another area or another world, you type: //schematic load mce tower1... your structure is back to your clipboard and finally you do the paste command (paste from the location you were relative to your copied selection).
It is all well explained in the link I provide you. I think there's no other way to achieve that. If it's still unclear to you, I suggest that you might need to check video tutorials about it on youtube.